Used process equipment
Used Stainless Steel TanksUsed Chemical Processing EquipmentUsed Stainless Steel Tank Reactor and Heat Exchangerused reactors tanksUsed Mix TanksUsed Pressure VesselsUsed Carbon Steel TanksUsed Stainless Steel Reactors
Ecrecon, Inc. Your Source for Quality Used Process Equipment

Inventory

Use the navigation to the left to select products. Once selected you can perform a detailed search within that category.


Blenders / Mixers

 1  2  3 » [View All]
 

Photo

BM-153

Photos
(2)
Blender/ Mixer Type:
Agitator 
Capacity:
5 HP 
Manufacturer:
Philadelphia 
Agitator. 5 HP Philadelphia Mixer / Agitator. Bolt-on. Model model 4040PTO. Output RPM 125 

Photo

BM-140

Photos
(1)
Blender/ Mixer Type:
Agitator 
Capacity:
0.87 HP 
Manufacturer:
Lightnin 
Lightnin Agitator model XD-87. Clamp-on. 0.87 HP, 1725/1425 rpm, 115-230 volt. 26.5" SS shaft. 

Photo

BM-139

Photos
(3)
Blender/ Mixer Type:
Agitator 
Capacity:
0.25 HP 
Manufacturer:
Lightnin 
Lightnin agitator. Clamp-on. model V1P18. 1/4 HP, 1725 rpm, 115/230 volt. 44" SS shaft. 

Photo

BM-114

Photos
(3)
Blender/ Mixer Type:
Agitator 
Capacity:
5 HP 
Manufacturer:
Lightnin 
Lightnin variable speed agitator. 5 HP, 1730, 230/460 volt, XP motor. Model 72C5VM. 28/83 RPM Output 

Photo

BM-171

Photos
(3)
Blender/ Mixer Type:
Agitator 
Capacity:
0.25 HP 
Manufacturer:
Lightnin 
Lightnin 0.25 HP Clamp-On mixer. 208-220/440 volt. 1725/1425 RPM. Explosion Proof drive 

Photo

BM-101

Photos
(7)
Blender/ Mixer Type:
AGITATOR 
Capacity:
0.75 HP 
Manufacturer:
GRAHAM 
Agitator . Magnapak type 304CM1-L, s/n 78513M. 3/4 HP, 1750 RPM, 115 V. Shaft is 20.5" Lgth. Has speed control. Sanitary design shaft and single prop. 

Photo

BM-104

Photos
(2)
Blender/ Mixer Type:
AGITATOR 
Capacity:
 
Manufacturer:
LIGHTNIN 
Flange mount air operated Lightnin agitator. SS shaft 1 x 38L. 11.5 dia flange with 8 bolt holes. 

Photo

BM-151

Photos
(4)
Blender/ Mixer Type:
Agitator 
Capacity:
2 HP 
Manufacturer:
Philadelphia 
2 HP Philadelphia agitator. Model PMV-01. Output RPM is 350. Bolt on type. Has Stainless Steel shaft. 

Photo

BM-135

Photos
(2)
Blender/ Mixer Type:
Agitator 
Capacity:
0.33 HP 
Manufacturer:
Chemineer 
Chemineer Agitator. Clamp-on. 1/3 HP, 1725 RPM, 208-230/460 volt. Mdl. PD-2. 44" Stainless steel shaft. 

Photo

BM-119

Photos
(5)
Blender/ Mixer Type:
Agitator 
Capacity:
5 HP 
Manufacturer:
GENERAL ELECTRIC 
3" diameter x 14'L stainless steel agitator. Rated 38.9:1 ratio, 29 RPMo. Motor is 5 HP, 1160 RPMi, 440 V, explosion proof (XP). 

Photo

BM-122

Photos
(4)
Blender/ Mixer Type:
AGITATOR 
Capacity:
0.33 HP 
Manufacturer:
LIGHTNIN 
Clamp-on Lightnin mixer/agitator. Vari-speed dial, 1/3 HP, 1725 RPM, 90 V, 3.6 Amp. Max safe speed 5500. From food grade dye plant. 48" Shaft with 2 props. 

noPhoto

BM-124

Photos
(0)
Blender/ Mixer Type:
AGITATOR 
Capacity:
 
Manufacturer:
LIGHTNIN 
Clamp-on Lightnin lab mixer/agitator. Series 21 vari-speed, 115 V, 1 Phase, 50/60 cycle. From food grade dye plant. 

noPhoto

BM-127

Photos
(0)
Blender/ Mixer Type:
AGITATOR 
Capacity:
0.75 HP 
Manufacturer:
CHEMINEER 
Chemineer agitator/mixer. 3/4 HP, 230/460 V, 1725 RPM. CS shaft 1" dia x 4'6" L with prop type blade. Has sqaure plate to mount on bridge. 

Photo

BM-128

Photos
(4)
Blender/ Mixer Type:
AGITATOR 
Capacity:
5 HP 
Manufacturer:
CHEMINEER 
316 Stainless Steel vari-speed agitator with sanitary design stainless steel shaft and blades. Mechanical seal. Flange mount. Driven by 7.5 HP, 1760 RPM, 230/460 V. Has Reeves Vari-drive rated 85 - 8.5 RPM. Stainless steel mixing shaft. 2.5" dia. x 6'10" lgth. (4) Blades that unscrew 34" wide blades. 

Photo

BM-143

Photos
(3)
Blender/ Mixer Type:
Agitator 
Capacity:
2 HP 
Manufacturer:
JWI 
JWI Clamp on mixer/Agitator model JL-200-3. 2 HP 208-230 volt. 6' lgth Stainless steel shaft with 2 sets of blades 

Photo

BM-183

Photos
(2)
Blender/ Mixer Type:
Agitator 
Capacity:
1/8 HP 
Manufacturer:
Lightnin 
1/8 HP Lightnin Clamp-on Mixer. Model NC-2. 115 Volt. 

Photo

BM-154

Photos
(2)
Blender/ Mixer Type:
Agitator 
Capacity:
75 HP 
Manufacturer:
Proquip 
ProQuip model 75QMW17 agitator. Has double mechanical seal agitator, s/n 14319 agitator with Reliance motor 75 HP, 1800 RPM, 460V, 3 Ph, 60 Hz. Falk reducer, RPM output 33-107. Built 1999. Has monel shaft flange. 

Photo

BM-157

Photos
(1)
Blender/ Mixer Type:
Agitator 
Capacity:
2 HP 
Manufacturer:
Lightnin 
2 HP Lightnin Series 10 Agitator. 2 HP. 460 Volt. Model 15Q2. 50 RPM out 

Photo

BM-158

Photos
(1)
Blender/ Mixer Type:
Agitator 
Capacity:
2 HP 
Manufacturer:
Lightnin 
2 HP Lightnin Series 10 Agitator. Driven by Siemens 2 HP, 1160 RPM, 460 Volt, 3.2 Amp motor. Model 14Q2. 16.4/82 RPM output, 14.06:1 ratio. 2" shaft inlet. Mounting base plate is 14.5" square from center bolt to center bolt. 

Photo

BM-159

Photos
(3)
Blender/ Mixer Type:
Agitator 
Capacity:
0.75 HP 
Manufacturer:
Lightnin 
Lightnin Model NLDG-75 Agitator. 3/4 HP. 230/460 Volt. 3.1/1.55 Amp. 60 Hz, 1750 RPM motor. 5' length FRP coated shaft with 2 props. Bolt on. 

Photo

BM-174

Photos
(2)
Blender/ Mixer Type:
Agitator 
Capacity:
60 HP 
Manufacturer:
Philadelphia 
Philadelphia Mixer drive. Size HPTEM-16, HP rating 62.1, RPM input = 1750, output = 84, ratio = 20.8:1. No motor, shaft, or blades. Has short shaft that is 5 diameter to flange coupling 8 holes, 11.5 OD. 

Photo

BM-175

Photos
(2)
Blender/ Mixer Type:
Agitator 
Capacity:
75 HP 
Manufacturer:
Philadelphia 
Philadelphia mixer. Size = HPTEM-16, HP rating = 75, RPM input = 1750, output = 100, ratio = 17.5:1. Flange mount 11.5" OD, 8 hole. 

Photo

BM-184

Photos
(2)
Blender/ Mixer Type:
Agitator 
Capacity:
.63 HP 
Manufacturer:
Lightnin 
.65 HP Clamp on Lightnin Mixer. 115/230 volt. 1725/1425 RPM. 

Photo

BM-185

Photos
(3)
Blender/ Mixer Type:
Agitator 
Capacity:
.43 HP 
Manufacturer:
Lightnin 
.43 HP Clamp on Lightnin Mixer. 115/230 volt. 1725/1425 RPM. 

Photo

BM-172

Photos
(1)
Blender/ Mixer Type:
AGITATOR/MIXER 
Capacity:
15 HP 
Manufacturer:
PHILADELPHIA MIXER 
Philadelphia Mixer/agitator. Model# PTEM-12-400, s/n 306296. 1750 RPMi, 25 RPMo, 70.1:1 ratio. 15 HP, 1765 RPM, 230/460 V. Flange mount. 
 
 1  2  3 »




Used Process Equipment | Used Stainless Steel Tank | Sell Used Chemical Process Equipment | Process Equipment Appraisals | Used Reactor | Buy and sell Manufacturing Chemical Plants | Refinery for sale | Buy Oil Refinery | Ethanol Plant Equipment | Used Tanks | Used Heat Exchangers | Used Filters | Used Mills | Used Granulators | Used Twin Shell Blender | Used Column | Distillation Column | Industrial Sites For Sale | Industrial Dismantling | Industrial Demolition | Used Centrifuges | Used Blenders | Used Mixers | Used Dryers | Used Screeners | Used Pumps | Mix Tanks | Pressure Vessels | Chemical Plants | Used Vacuum Pumps | Used Food Processing Equipment | Surplus Process Equipment | Used Process Equipment | Used Pharmaceutical Equipment | Polymerization

Sign Up for Our Newsletter New Arrivals Plant Liquidation Plant Dismantling Short on time? Tell us what you need!


Plant Picture Tank Picture Pumps Picture Tank Picture 2