Display:ListGrid

Tanks

Sub-Categories

TAN-964

used 5 gallon LEE model 5CDM9MT jacketed mixing Kettle. Has double motion sweep mixer with scraper blades. Tilt out agitator and tilt kettle. Jacket rated 40 PSI @ 300 Deg.F. Includes control panel with speed controller (0-60 rev/min.). Last used in sanitary application. 316 Stainless Steel.

Gallons

5

Material

316 STAINLESS STEEL

Manufacturer

LEE

TAN-697

Approx. 10 gallon Stainless Steel mixing tank. Belt driven Agitator/Mixer. Has shaft and blades, no drive. Carbon Steel Jacket. Bolt on top.

Gallons

10

Material

Stainless Steel (SS)

Manufacturer

TAN-421

15 Gallon Stainless Steel jacketed Kettle/tank. CS jacketed rated 40 PSI @ 290 degF. Has hinged lid. 1.5" CBO, OAH = 40". 16" deep in the middle.

Gallons

15

Material

Stainless Steel (SS)

Manufacturer

LEE

TAN-729

Qty. (5) Each: 18 gallon, poly storage tanks. Cone bottom

Gallons

18

Material

POLY

Manufacturer

INDUSTRIAL FARM TANK INC.

TAN-406

20 Gallon Air driven Sweep Agitator, Stainless Steel. 40:1 gear ratio, 1725 input/ 43 output.

Gallons

20

Material

SS

Manufacturer

OSCAR FISHER CO

TAN-1056

***SOLD***used Groen 20 Gallon Jacketed Mix Kettle, stainless steel. Model RA20SP. Jacket rated 100 psi @ 338 F, Anchor Agitation with scraper blades driven by 0.5 HP, 1725 RPM into gear 36:1, 56 RPM max, 14 RPM mim. 2" Center bottom outlet. Mounted on Portable S/S Frame. National Board #55979. Previously used in sanitary food plant.

Gallons

20

Material

STAINLESS STEEL

Manufacturer

GROEN-DOVER

TAN-958

Used 25 gallon Stainless steel tank. Approx. 16.5" dia. x 31" deep. 36" overall height. 1" bottom outlet. Open top

Gallons

25

Material

STAINLESS STEEL

Manufacturer

TAN-288

30 Gallon Stainless Steel sanitary jacketed Kettle/tank. SS jacket. 1.5" CBO, OAH = 41". 20" deep. Jacket nozzle needs repair (leaks).

Gallons

30

Material

Stainless Steel (SS)

Manufacturer

TAN-305

30 Gallon Stainless Steel sanitary jacketed tank Kettle. SS jacket rated 40 PSI @ 267 degF. 1.5" CBO. OAH = 64". Bolt-on hinged lid. 20" deep.

Gallons

30

Material

Stainless Steel (SS)

Manufacturer

HAMILTON

TAN-575

Qty. (2) Each: 30 gallon stainless steel jacketed kettle. Has copper dual/double action anchor type scrapper blades sweep mixer/agitator. Driven by 5/2.5/3 HP, 550 V, 1800/900/1200 RPM. Has tilt discharge with dump spout.

Gallons

30

Material

Stainless Steel (SS)/Copper

Manufacturer

TAN-732

Qty. (2) Each: 30 gallon cone bottom poly tank on stand.

Gallons

30

Material

POLY

Manufacturer

TAN-1093

(7) approx. 30 Gallon Stainless Steel Sanitary Portable Tanks/Totes. Built by The Pub Brewing Company. 1'6" Dia. x 2' T/T. Dish bottom with center bottom outlet with 1.5" Ball valve. Hinged Lid. Units mounted on wheels.

Gallons

30

Material

STAINLESS STEEL

Manufacturer

The Pub Brewing Company

TAN-396

35 Gallon Stainless Steel Tank. On 4 CS legs. Upper and lower half of tank bolt together.

Gallons

35

Material

SS

Manufacturer

TAN-985

used 35 gallon 316L stainless steel mixing tank. Air driven Lightnin Mixer/Agitator model, N33AG-33, s/n 7718227. Tank rated 14 PSI @ 150 Deg.F..

Gallons

35

Material

316L STAINLESS STEEL

Manufacturer

AJ SCHMIDT

TAN-698

40 gallon carbon steel tank with TEEL pump on bottom outlet.

Gallons

40

Material

Carbon Steel (CS)

Manufacturer

TAN-306

50 Gallon Stainless Steel Kettle. Jacketed Kettle. Stainless Steel jacket rated 40 PSI. 1.5" CBO. OAH = 37"

Gallons

50

Material

Stainless Steel (SS)

Manufacturer

HAMILTON

TAN-365

50 Gallon Stainless Steel sanitary jacketed Kettle/tank. CS jacketed rated 40 PSI @ 290 degF. Has 1.5" CBO and an OAH of 3'6".

Gallons

50

Material

Stainless Steel (SS)

Manufacturer

LEE

TAN-682

50 gallon sanitary stainless steel jacketed kettle/tank. CS jacket rated 40 PSI @ 290 degF.

Gallons

50

Material

Stainless Steel (SS)

Manufacturer

LEE

TAN-667

50 gallon Hamilton, Stainless Steel jacketed kettle. Stainless Steel jacket rated 40 PSI @ 267 degF. Open top. 30" dia. x 8" Straight Side, 47" OAH.

Gallons

50

Material

Stainless Steel (SS)

Manufacturer

HAMILTON

TAN-636

50 gallon stainless steel jacketed kettle. On wheels. Open top with drop-on lid.

Gallons

50

Material

Stainless Steel (SS)

Manufacturer

TAN-1104

used 50 Gallon LEE Kettle with Double motion scraper agitation. Model 50D9MT. Jacket rated 40 PSI @ 287 Deg.F. 2" Outlet. S/N B9057A2.

Gallons

50

Material

STAINLESS STEEL

Manufacturer

LEE

TAN-1105

used 50 Gallon LEE Kettle with Double motion scraper agitation. Model 50D9MT. Jacket rated 40 PSI @ 287 Deg.F. 2" Outlet. S/N B9057A1.

Gallons

50

Material

STAINLESS STEEL

Manufacturer

LEE

TAN-1067

50 gallon stainless steel jacketed tank. Jacket is electrically heated. Tank is 28" dia x 17" on high side, 21" outlet side (slope bottom, slant bottom). 1.5" outlet with 2" tri-clamp connection. Portable, on wheels. 42" OAH.

Gallons

50

Material

Stainless Steel

Manufacturer

TAN-1096

used 50 gallon Stainless Steel tank/drum. 23" dia. x 30" ht. Has 1" side outlet with valve. Last used in sanitary application. Cart not included.

Gallons

50

Material

STAINLESS STEEL

Manufacturer

TAN-728

Qty. (2) Each: 55 gallon, poly storage tanks. Cone bottom.

Gallons

55

Material

POLY

Manufacturer

TAN-722

Qty (49) Each: Used 55 Gallon, Stainless Steel drums, 22" dia. x 36" deep. Smooth finish walls, seamless drum. Sanitary from Soup (food) manufacturing plant. 55 gallon drum, food grade.

Gallons

55

Material

Stainless Steel (SS)

Manufacturer

TAN-989

ON HOLD. (1) each used 55 gallon Stainless Steel drum. 22.5" Dia. x 35" ht. Open top and flat bottom. 55 gallon drum.

Gallons

55

Material

STAINLESS STEEL

Manufacturer

TAN-1097

used 55 gallon Stainless Steel tank/drum. 23" dia. x 32" ht. Last used in sanitary application.

Gallons

55

Material

STAINLESS STEEL

Manufacturer

TAN-1098

used 55 gallon Stainless Steel tank/drum. 22.5" dia. x 35" ht. Last used in sanitary application.

Gallons

55

Material

STAINLESS STEEL

Manufacturer

TAN-422

60 Gallon Stainless Steel Kettle. Has 1.5" CBO. OAH = 45". MOC appears to be aluminum.

Gallons

60

Material

Aluminum, Aluminium (Al)

Manufacturer

TAN-1089

used 60 Gallon GROEN Jacketed Mix Kettle. Model RA-60. Steam Jacket rated 100 PSI @ 338 Deg.F. Has sweep agitator with scraper blades and (2) paddle baffles. Driven by 3 HP, 1700 rpm, 230/460 volt motor into a 69.31:1 gear reducer for approx 24.5 rpm output. 3" CBO with flush ball valve. 6'5" OAH. Last used in food plant.

Gallons

60

Material

STAINLESS STEEL

Manufacturer

GROEN

TAN-1032

used Groen 60 Gallon Stainless Steel Jackted Mix Kettle. Model TA 60. Triple motion mixing. Unit equipped with Full Sweep Agitator with Scrappers and Counter Rotating 4-Tier Turbine "Tree" Agitator both drive by 1 HP, 208-230/460 V, 1725 RPM input explosion proof motor (XP motor), Charles Ross ME-105 High Speed Homogenizer Agitator S/N: 54333 with 5-HP Drive, UL rated XP motor. Jacket rated 150 PSI. Full Lid, Center Bottom Discharge, Stainless Steel Baffle, (3) Stainless Steel Legs, E-Trac AC Inverter and Controls. Last used in sanitary application in cosmetics plant.

Gallons

60

Material

STAINLESS STEEL

Manufacturer

GROEN

TAN-270

65 Gallon Stainless Steel. Has bottom mounted Grinder Pump 3 HP, with 40:1 gear. Mounted in CS frame on wheels

Gallons

65

Material

304SS

Manufacturer

UNITED UTENSILS

TAN-1094

(2) approx. 70 Gallon Stainless Steel Sanitary Portable Tanks/Totes. 2' Dia. x 2'4" T/T. Dish bottom with center bottom outlet with 1.5" Ball valve. Hinged Lid. Units mounted on wheels.

Gallons

70

Material

STAINLESS STEEL

Manufacturer

TAN-366

70 Gallon Poly material, Vertical Tank.

Gallons

70

Material

POLY

Manufacturer

HODGSON

TAN-980

(6) Each Used approx 70 Gal Stainless Steel Mix Tanks. 2' dia x 3' straight side (8' 2" OAH). Closed top, hinged cover, 4" dished bottom with 2" outlet. Center mount Agitator, 1 HP/3/460V, 1755 RPM w/gear reducer(31.3 final RPM). 1.5" SS Shaft with 2 blade propeller. Internal baffles. Mounted on 4 legs. Previous use: Paint Industry.

Gallons

70

Material

STAINLESS STEEL

Manufacturer

TAN-966

(1) Stainless Steel Koch tote/cart on asters/wheels. Approx. 10 Cu.Ft. (75 Gallon) 24" X 24" X 30" Deep. Sanitary construction. Portable.

Gallons

75

Material

STAINLESS STEEL

Manufacturer

KOCH

TAN-1100

(4) 10 Cu.Ft. Stainless Steel Totes built by Tote Container Systems Ltd. 32" x 32" x 7" T/T with 32" deep cone bottom with 8" outlet. Approx. 80 gallon. Mounted on wheels. Top openings: 18" with a 4" on cover and (2) 2". Last used as Mobile Charge Bins in Sanitary application in Pharmaceutical plant. Tare weight 107 kg each. 50" Overall height.

Gallons

80

Material

STAINLESS STEEL

Manufacturer

Tote Container Systems Ltd

TAN-814

Approx. 80 Gallon, Cone Bottom, Stainless Steel Hopper/Tank with Top Mesh screen and hinged lids. 50" OAH. 33" deep cone, 38" across x 44" long. 3" triclover center bottom outlet. 2 lift up lids one on each end. Mesh Screen is lift out and approx. 3/8" squared openings. 38" across by 44" long. Last used in food plant

Gallons

80

Material

Stainless Steel

Manufacturer

TAN-1090

used 80 Gallon GROEN Jacketed Mix Kettle. Double Motion agitation with scraper blades and tree mixer. Model TA80SP. Driven by 2 HP, 1730 rpm, 230/460 volt motor. Includes lift off lids. Jacket rated 100 PSI. Last used in food plant.

Gallons

80

Material

STAINLESS STEEL

Manufacturer

GROEN

TAN-1091

used 80 Gallon GROEN Jacketed Mix Kettle. Double Motion agitation with scraper blades and tree mixer. Model TA80SP. Driven by 2 HP, 1750 rpm, 220 volt motor. Jacket rated 100 PSI. Includes lift off lids. Last used in food plant.

Gallons

80

Material

STAINLESS STEEL

Manufacturer

GROEN

TAN-1092

(4) approx. 90 Gallon Stainless Steel Sanitary Portable Tanks/Totes. Built by The Pub Brewing Company. 2'6" Dia. x 2'3" T/T. Dish bottom with center bottom outlet with 1.5" ball valve. Hinged Lid. Units mounted on wheels.

Gallons

90

Material

STAINLESS STEEL

Manufacturer

The Pub Brewing Company

TAN-1077

used 95 Gallon Stainless steel mix tank built by Groen. Model 95 gal SP. 30" dia. x 34" deep. Has top mounted Lightnin model XJ-43, S/N 92/B32260-04, .43 HP, 1725/1450 rpm, 208-230/460 volt motor. Approx 70" OAH. Side bottom outlet.

Gallons

95

Material

STAINLESS STEEL

Manufacturer

GROEN

TAN-628

95 gallon, Carbon Steel storage tank. On legs

Gallons

95

Material

Carbon Steel (CS)

Manufacturer

TAN-788

100 Gallon GROEN model PT-100 Jacketed Kettle, with dome type hindged lid. Jacket rated 25 PSI @ 300 F.

Gallons

100

Material

Stainless Steel

Manufacturer

GROEN

TAN-315

100 Gallon Stainless Steel Sanitary jacketed Kettle. SS jacket rated 45 PSI. Has 2" CBO.

Gallons

100

Material

Stainless Steel (SS)

Manufacturer

GROEN

TAN-347

100 Gallon Stainless Steel Kettle. Jacketed Kettle. CS Jacket rated 40 PSI. Has 1.5" CBO. The OAH = 42".

Gallons

100

Material

SS

Manufacturer

TAN-991

used 100 gallon carbon Steel DOT tank built by Manchester. DOT # 4BW243. Last used to hold Hydrocarbons.

Gallons

100

Material

CARBON STEEL

Manufacturer

MANCHESTER

TAN-893

used 100 gallon Stainless Steel tank. Built by Bendel. Open top and dish bottom. Has (4) Baffles inside. 30" Dia. x 3' T/T. Jacket is not functional.

Gallons

100

Material

STAINLESS STEEL

Manufacturer

BENDEL

TAN-823

Used ROSS model RVMS-100. Pharmaceutical mixing reactor. Rated 30 PSI @ 300 Deg.F. Has "Egg Beater" and turbine blade on one mixing shaft. Mixer drive is Lightnin 1.74 HP, 208-220/440 volt, 1725/1425 RPM. Has lift to raise mixer and lid. Sanitary construction.

Gallons

100

Material

STAINLESS STEEL

Manufacturer

ROSS

TAN-426

100 Gallon Stainless Steel jacketed sanitary Kettle/Tank. CS Jacket rated for 40 PSI @ 287 degF. Has 2" CBO and an OAH of 45.5".

Gallons

100

Material

Stainless Steel (SS)

Manufacturer

LEE

TAN-429

100 Gallon Stainless Steel sanitary jacketed Kettle. CS jacket rated for 40 PSI @ 290 degF. Has 2" CBO. Mounted in CS frame.

Gallons

100

Material

SS

Manufacturer

LEE METAL PRODUCTS

TAN-573

100 gallon Poly tank. With level sensor. Skid mounted.

Gallons

100

Material

POLY

Manufacturer

TAN-751

100 Gallon used Poly tank. Equipped with 1/2 HP 230/460 volt mixer. No outlets on tank. All material was put in and removed from top.

Gallons

100

Material

POLY

Manufacturer

TAN-625

100 gallon Stainless Steel mix tank. Agitator is air operated clamp-on mixer.

Gallons

100

Material

Stainless Steel (SS)

Manufacturer

TAN-938

used LEE 100 gallon Double Motion, Jacketed, Mix Kettle. Rated 30 PSI @ 250 Deg.F. shell. Jacket rated 100 PSI @ 338 Deg.F.. Model 100U9MS. Double Motion Scraper agitation/sweep mixer driven by a 2 HP, 230/460 volt, 3ph, 300-1800 rpm motor into gear box with 18 to 107 rpm output. NB # 11059. 316 Stainless Steel Mirror Polished. Last used in Sanitary application.

Gallons

100

Material

316 STAINLESS STEEL

Manufacturer

LEE

TAN-1065

Used Dual 100 Gallon Salad Dressing Style Mixer. Dixie style mixer. Tanks mounted on Stainless Steel platform (footprint 75" x 83". Tanks are 100 gallon each, 31.5" dia by 37" straight side, open top, dish bottom, 6" center bottom outlet reduced to 3". One unit with 3 squirrel cage mixer blades (no drive), other unit has provisions to mount same.

Gallons

100

Material

Stainless Steel

Manufacturer

TAN-927

Used 110 gallon Stainless Steel tank. 3'2" dia. x 2' ht. Flat top with 17.5" dia. opening with lid. Slope bottom with 1.5" outlet with sanitary connection. 5' OAH.

Gallons

110

Material

STAINLESS STEEL

Manufacturer

TAN-343

115 Gallon Stainless Steel Mix Tank. Has 3/4 CS Jacket rated 25 psi @ 267 degF. Also has Lightning Mixer model LD6150, s/n 565752 - drive missing. Tank sits on (4) CS legs down 15" from straight side. Bolt on flat top with 1/3 hinged opening.

Gallons

115

Material

SS

Manufacturer

VENANGO ENG CO

TAN-995

Used approx. 115 gallon vertical tank. Manuf by Vanpipe LTD, 2' dia x 5' T/T. Has sight glass.

Gallons

115

Material

Manufacturer

Vanpipe LTD

TAN-341

120 Gallon Stainless Steel Portable Tank. Head and shell thickness .125". Tank is cradled in CS frame on wheels. (1) 6" bottom valve.

Gallons

120

Material

SS

Manufacturer

Phillips Steel Fab.

TAN-1014

used Lee 125 gallon stainless steel tank, portable on wheels. 32" dia x 36" straight side. Top manway for easy cleaning. Dish top with slope bottom. Bottom outlet needs repair. Previously used in sanitary flavors plant.

Gallons

125

Material

Stainless Steel (SS)

Manufacturer

Lee Metal Products

TAN-954

(12) used 16 Cu.Ft. (125 Gallon) Sanitary Stainless Steel Conical Tote Tanks. Approx. 52" diameter x 40" Deep with 8" bottom butterfly valves. United Utensils Co. (Utensco). 23" Top opening. 4'3" overall height. Portable, on wheels.

Gallons

125

Material

304 STAINLESS STEEL

Manufacturer

UNITED UTENSILS CO

TAN-1015

used Lee 125 gallon stainless steel tank, portable on wheels. 32" dia x 36" straight side. Top manway for easy cleaning. Dish top with slope bottom. Previously used in sanitary flavors plant.

Gallons

125

Material

Stainless Steel (SS)

Manufacturer

Lee Metal Products

TAN-974

used approx. 130 gallon Crepaco stainless steel Jacketed tank. Jacket rated 75 PSI @ 315 Deg.F.. 3'4" dia. x 2'3" T/T. Dome top and Cone bottom. Mount for mixer, no drive. 3" Sanitary center bottom outlet. approx. 5' OAH.

Gallons

130

Material

STAINLESS STEEL

Manufacturer

CREPACO

TAN-256

150 Gallon Glass Lined, Carbon Steel Tank. Has clamp-on top. Full Carbon Steel Jacket.

Gallons

150

Material

GL/CS

Manufacturer

TAN-562

Qty (3) Each: 150 gallon (500L) Poly storage tank.

Gallons

150

Material

POLY

Manufacturer

TAN-601

150 gallon Rubber lined carbon steel tank. 2" CBO.

Gallons

150

Material

RL/CS

Manufacturer

TAN-819

(6) Each, Hopper Tanks/tote tanks. Approx 20 Cu.Ft. (150 Gallon) 23.5" x 4' wide x 2' straight side depth. (2) Approx. 6" dia. outlets with slide gate valves. Hinged lid.

Gallons

150

Material

316 STAINLESS STEEL

Manufacturer

TAN-1027

165 gallon LEE jacketed kettle, stainless steel. Jacket rated 15 PSI @ 250 degF. 2" Center bottom outlet. Has bracket to mount clamp-on mixer and easily convert to mixing kettle. With hinged lid/cover.

Gallons

165

Material

Stainless Steel

Manufacturer

Lee Metal Products

TAN-992

Used 165 Gallon Stainless steel tank on skid with 2 pumps mounted underneath. Tank is 41" dia X 31" ht. 2 sanitary ss pumps Mfg. Scami model 9200 size: 1.5" x 1". 1.1 kw (1.5 HP) 440V , 50Hz

Gallons

165

Material

STAINLESS STEEL

Manufacturer

TAN-1095

(2) approx. 170 Gallon Stainless Steel Sanitary Portable Tanks/Totes. Rectangular 2'6" wide x 3'9" lgth. x 2'1" T/T. Cone bottom with side outlet with valve. Lift off Lid. Units mounted on wheels.

Gallons

170

Material

STAINLESS STEEL

Manufacturer

TAN-969

used 175 Gallon Stainless Steel tank. Chem-Tek. 3'2" Dia. x 3' ht. 5'8" Overall height. Flat top and bottom. Top manway. 3" sanitary outlet

Gallons

175

Material

STAINLESS STEEL

Manufacturer

CHEM-TEK

TAN-1068

***SOLD***175 gallon stainless steel square storage tank mounted on carbon steel frame with forklift slots for easy portability (portable). Flat top with 24" x 24" hinged lid. 2" center bottom outlet with valve. Tank dimensions are 48" x 48" x 29" H.

Gallons

175

Material

Stainless Steel

Manufacturer

TAN-393

180 Gallon Stainless Steel Sanitary Tank. Has 3" btm discharge.

Gallons

180

Material

SS

Manufacturer

PROCESS EQUIP. CORP

TAN-541

185 Gallon Stainless Steel Tank. Dish top and bottom. Lug mounted

Gallons

185

Material

Stainless Steel (SS)

Manufacturer

TAN-854

200 gallon stainless steel storage tank. Has top mounted spray ball. 1.5" Center bottom outlet with sanitary fitting and valve. Tank is on wheels for easy portability. Top has quick open swing bolts for easy clean out. Has solid chemical additive mixing basket and agitating nozzle aka spray ball) See pictures.

Gallons

200

Material

Stainless Steel (SS)

Manufacturer

TAN-281

(1) 200 Gallon Fiberglass, FRP. With 2' cone bottom.

Gallons

200

Material

FRP (Fiberglass)

Manufacturer

TAN-323

200 Gallon Stainless Steel. Flat top with a slant/sloped bottom. Mounted on legs.

Gallons

200

Material

Stainless steel

Manufacturer

TAN-383

200 Gallon Stainless Steel, Vertical Tank with Cone bottom and flat top.

Gallons

200

Material

SS

Manufacturer

TAN-614

200 gallon Carbon Steel storage tank. Flat bottom, open top with lift off lid.

Gallons

200

Material

Carbon Steel (CS)

Manufacturer

TAN-812

200 Gallon Glass Lined, Jacketed vessel/reactor body. No Lid. No Nameplate. Has bottom valve.

Gallons

200

Material

GLASS LINED

Manufacturer

TAN-445

200 Gallon Carbon Steel, Glass Lined Tank. Has full CS Jacket rated 90 PSI. Internal pressure 25 PSI. On 4 CS legs. Glass is NC-53. 3'3" ID x 3' Straight Side.

Gallons

200

Material

CS/GL

Manufacturer

PFAUDLER

TAN-871

UNUSED, Approx. 200 Gallon Sanitary construction tank. Vertical. Dish top and bottom mounted on 3' legs. Approx. 34.5" Dia. x 4' T/T. Insulated and then shrouded in stainless steel. Approx. 3'6" OD and 8'6" OAH.

Gallons

200

Material

STAINLESS STEEL

Manufacturer

TAN-564

200 gallon Poly tank. With mixer/agitator. Skid mounted with control panel.

Gallons

200

Material

POLY

Manufacturer

TAN-818

200 gallon Stainless Steel Tank. 3'dia. x 4' T/T. Dish top and Slope bottom. Has several openings including 2" flared to 2.5" side bottom outlet. 3" outlet and top lift of lid. Mounted on 6' x 40" wide Stainless Steel cart with wheels. Last used as part of a clean in place (CIP) system in food plant.

Gallons

200

Material

STAINLESS STEEL

Manufacturer

TAN-841

200 Gallon, used Stainless Steel Jacketed Mix Tank. Mfr. D&W Welding. 3' dia. x 3'8" T/T. Flat top and Dish Bottom. Jacket rated 50 PSI @ 290 Deg.F. Has Lightnin model NLDG50, Explosion Proof mixer with turbine blade.

Gallons

200

Material

STAINLESS STEEL

Manufacturer

D&W Welding

TAN-1046

Used approx. 200 Gallon Stainless Steel tank. 44" Dia. x 2'2" T/T. Open top with hinged lids and bridge for mixer. Cone bottom with 3" Sanitary outlet. Approx 6' OAH.

Gallons

200

Material

STAINLESS STEEL

Manufacturer

TAN-1078

(24) used 200 Gallon (26 Cu.Ft.) 316 Stainless Steel Utensco Totes. (24) Units available. 54" dia. x 58" OAH. Units have Lift out "Cone in Cone" design. 8" Discharge with butterfly valve. Units mounted on wheels. 63" OD. Last used in sanitary Pharmaceutical plant. (11) units have lift off poly lids. (5) units with no inner cones, (2) units have no valves. (9) units have no wheels.

Gallons

200

Material

316 STAINLESS STEEL

Manufacturer

UNITED UTENSILES

TAN-994

210 Gallon Poly tank.

Gallons

210

Material

POLY

Manufacturer

TAN-1051

used 220 Gallon Stainless Steel tank. 40" Dia. x 41' T/T. Open top, Slope bottom. 79" OAH. 1.5" Outlet. Lift off lid. Last used in a food plant, sanitary application.

Gallons

220

Material

STAINLESS STEEL

Manufacturer

TAN-1062

220 Gallon Crepaco Jacketed Mix tank. Top mixer with scraper blades. Mixer motor is 1.5 HP, 1725 rpm, 230 volt. Approx. 4'2" dia. x 2' T/T plus cone bottom. Jacket rated 75 PSI. 2" CBO with sanitary tri-clamp fitting. Approx 8' OAH. Unit sold as is.

Gallons

220

Material

STAINLESS STEEL

Manufacturer

CREPACO

TAN-1063

220 Gallon Crepaco Jacketed tank. Has anchor mixing shaft, no drive. Approx. 4'2" dia. x 2' T/T plus cone bottom. Jacket rated 75 PSI. Unit has Jacket, insulation and then a stainless steel shroud. 2" CBO with valve. Approx 6' OAH. Unit sold as is. No nameplate.

Gallons

220

Material

STAINLESS STEEL

Manufacturer

TAN-411

225 Gallon Carbon Steel Tank. 10" top opening. Has Armored Site Glass.

Gallons

225

Material

CS

Manufacturer

TAN-968

used 226 Gallon Stainless Steel tank. Chem-Tek model 226 OVS. 3' Dia. x 3'10" ht. 81" Overall height. Open top with lift off hinged lid. 2" sanitary outlet.

Gallons

226

Material

STAINLESS STEEL

Manufacturer

CHEM-TEK

TAN-302

250 Gallon Stainless Steel Tank. Has bracket to mount clamp-on Mixer (Mixers can be purchased separately) with hinged cover. Openings: side- 1-2", 1-4"; bottom 1-1". Tank mounted on short legs.

Gallons

250

Material

304SS

Manufacturer

TAN-334

250 Gallon Glass Lined, Carbon Steel. With 16" manway on top. Tank sat on 4 pipe legs, unavalible. No name plate. Stamped with Lukins, 8959.

Gallons

250

Material

GL/CS

Manufacturer

TAN-369

250 Gallon Stainless Steel Tank. SS shell/ CS Jacket. Quoted AIWI

Gallons

250

Material

SS

Manufacturer

TAN-782

Qty (4) Each: 250 gal (1000 L) Tote/Bin/Tank. Liquid poly totes. 2" Side Btm Outlet. Mounted in aluminum frame with skid for easy transport. 48" x 40" x 48" H. Portable.

Gallons

250

Material

POLY

Manufacturer

TAN-858

Qty (3) Each: 250 gal (1000 L) Tote/Bin/Tank. Liquid poly totes. 2" Side Btm Outlet. Mounted in frame with skid for easy transport. Portable.

Gallons

250

Material

POLY

Manufacturer

TAN-563

260 gallon Poly tank. With mixer/agitator.

Gallons

260

Material

POLY

Manufacturer

TAN-286

Qty. (2) Each: 300 Gallon Fiberglass, FRP Mix Tank built by Justin. Equipped with Philadelphia Mixer, 5 HP, 230/460 V, 1730 RPM in, 151 RPM out.

Gallons

300

Material

FRP

Manufacturer

JUSTIN

TAN-990

used 300 Gallon Square Stainless steel tank. 43" x 36" x 48" ht. 6' OAH on skid

Gallons

300

Material

STAINLESS STEEL

Manufacturer

TAN-626

300 gallon Carbon Steel storage tank.

Gallons

300

Material

Carbon Steel (CS)

Manufacturer

TAN-783

Qty (3) Each: 300 gal (1200 L) Tote/Bin/Tank. Liquid poly totes. 2" Side Btm Outlet. Mounted in aluminum frame with skid for easy transport. 48" x 40" x 54" H. Portable.

Gallons

300

Material

POLY

Manufacturer

TAN-638

300 gallon FRP tank with mixer. Mixer is 0.5 HP, 115/208-230 volt, 1725 RPM motor. Has flat top with hinged section.

Gallons

300

Material

FRP

Manufacturer

Harrington Industrial

TAN-967

used 300 Gallon Cherry Burrell (2) Compartment Flavor Tank. (2) 300 gallon compartments. Each compartment equipped with 0.5 HP, 240/480 volt mixer and spray ball. 2" sanitary outlets. Bottom of tanks are jacketed. Overall dimensions 8' lgth.x 5'6" w x 7' ht.

Gallons

300

Material

STAINLESS STEEL

Manufacturer

CHERRY BURRELL

TAN-970

used 300 gallon Cherry Burrell stainless steel tank. Model 300MEPDCA. 4' dia. x 3'6" T/T. Dome top and Cone bottom. Has Mixer shaft, no drive. 2" sanitary center bottom outlet. approx. 7' OAH.

Gallons

300

Material

STAINLESS STEEL

Manufacturer

CHERRY BURRELL

TAN-971

used 300 gallon Cherry Burrell stainless steel tank. Model 300MEPDCA. 4' dia. x 3'6" T/T. Dome top and Cone bottom. Has spray ball. Mount for mixer, no mixer available. 2" sanitary center bottom outlet. approx. 7' OAH.

Gallons

300

Material

STAINLESS STEEL

Manufacturer

CHERRY BURRELL

TAN-1016

used approx. 300 gallon stainless steel tank. 48" dia x 38" straight side. Dish top, dish bottom. Approx. 1" center bottom outlet. Top manway. Mounted on stainless steel legs. Previously used in sanitary flavors and fragrance plant.

Gallons

300

Material

Stainless Steel (SS)

Manufacturer

TAN-1055

used 300 Gallon Walker CIP (Clean in Place) tanks. (Price includes both 300 gal tanks) Model CIP. 3'9" Dia. x 3'10" deep. Flat top with hinged lid. Slight cone bottom. S/N 2268. tanks mounted on Stainless Steel frame. Overall dimensions are 6'5" ht. x 8'6" lgth. x 4' wide. Last used as in sanitary application in Food Plant.

Gallons

300

Material

STAINLESS STEEL

Manufacturer

WALKER

TAN-1066

used 300 Gallon LEE Jacketed Stainless Steel Double Motion Mix Tank/Kettle. Has Double motion Scraping agitator, counter rotating. Jacket rated 45 PSI @ 293 Deg.F. Driven by US Varidrive Motor 10 HP, 220/440 volt into vari-speed gear box, 38 RPMmin, 190 RPMmax. 2" center bottom outlet. Lift out agitator with actuator. Approx. 59" to top lip and 84" OAH (does not include height for drive).

Gallons

300

Material

Stainless Steel

Manufacturer

LEE

TAN-1069

300 gallon stainless steel storage tank mounted on carbon steel frame with forklift slots for easy portability (portable). Tank is 56" dia x 32". Flat top with 24" x 24" hinged lid. Cone bottom with 2" center bottom outlet with valve.

Gallons

300

Material

Stainless Steel

Manufacturer

TAN-963

(42) used 330 Gallon Stainless steel Tanks/Totes. Built by Custom Metal Craft. Transtore Transportable storage systems. Flat top with center lid and cone bottom with 2" outlet. Units mounted on forklift slots. All units similar but not identical.

Gallons

330

Material

304 STAINLESS STEEL

Manufacturer

Custom MetalCraft

TAN-981

***SOLD***Used 330 gallon 304 Stainless Steel Custom Metalcraft, Inc Vertical Storage Tote mounted on steel forklift slots. Portable. Serial # 36198-1; Built 2000.

Gallons

330

Material

304 STAINLESS STEEL

Manufacturer

Custom MetalCraft

TAN-754

350 Gallon, used GROEN/DOVER Kettle. Jacketed. Jacket rated 90 PSI @ 338 Deg.F. Jacket needs repair. Equipped with Lightnin 1.5 HP, model XLQ-100D top mounted mixer. Sanitary. 3" Center Bottom outlet. Last used in Food Plant.

Gallons

350

Material

316SS

Manufacturer

GROEN/DOVER

TAN-357

350 Gallon Poly, Vertical Tank.

Gallons

350

Material

POLY

Manufacturer

TAN-455

Qty. (3) Each: 350 Gallon Fiberglass Mix Tank. (2) units with Lightnin Mixer, 3.5 HP, mdl# XJQ-174, s/n R0032100202, 1725/1450 RPM, 220/440 V. Mixer housing is cracked

Gallons

350

Material

FRP

Manufacturer

FIBERNETICS

TAN-457

Qty. (3) Each: 350 Gallon Fiberglass Mix Tank. Equipped with top mounted mixer.

Gallons

350

Material

FRP

Manufacturer

TAN-458

350 Gallon Fiberglass Mix Tank. Equipped with Mixer, 1 HP, 230/460 V, 1725 RPM.

Gallons

350

Material

FRP

Manufacturer

TAN-674

360 Gallon Poly Storage tank/Tote. 2" Side Bottom Outlet. Tested at 15 PSI. Has thread-on lid/top that can be removed.

Gallons

360

Material

POLY

Manufacturer

21st Century Containers

TAN-675

(1) 360 Gallon Poly Mix Tank / Tote. 2" Side Bottom outlet with valve. Has Dayton 1.5 HP, 1725 RPMinput, 115/230 volt, single phase mixer/agitator. Has thread-on lid/top that can be removed. Test pressure at 15 PSI.

Gallons

360

Material

POLY

Manufacturer

21st Century Containers

TAN-449

375 Gallon Carbon Steel Tank. Mounted on legs. Openings: Top: (4) 2" ; Side: (2) 1" for sight glass capability, (2) 2" , (1) 2.5" side btm outlet.

Gallons

375

Material

CS

Manufacturer

TAN-504

(1) 375 Gallon Stainless Steel Storage Tank. In CS frame. Last used in sanitary/pharmaceutical shampoo industry.

Gallons

375

Material

SS

Manufacturer

ALSOP ENGINEERING CORP.

TAN-565

375 gallon Poly tank. With mixer/agitator. Has internal poly coil. Previously used as a cooling tank.

Gallons

375

Material

POLY

Manufacturer

TAN-566

375 Poly tank. With mixer/agitator.

Gallons

375

Material

POLY

Manufacturer

TAN-905

380 gallon stainless steel storage tank. 42" diameter x 64" T/T. Open top, dish bottom. Rated Atmospheric @ 200 degF. 3" center bottom outlet. Lug mount.

Gallons

380

Material

Stainless Steel (SS)

Manufacturer

SFI (Stainless Fabrication Inc.)

TAN-351

400 Gallon Stainless Steel Tank. Lug mount. Openings: Top- 18" Manway with cover, 2-2", 1-6", 1-8"; 2" btm outlet.

Gallons

400

Material

304 SS

Manufacturer

TAN-781

400 gallon, Vertical, Stainless Steel mixing tank. Dish bottom, dish top. Agitator is top mounted. Mounted on steel frame.

Gallons

400

Material

Stainless Steel (SS)

Manufacturer

TAN-459

400 Gallon Fiberglass FRP Storage Tank.

Gallons

400

Material

FRP

Manufacturer

TAN-1019

used approx. 400 gallon stainless steel tank. 48" dia x 44" straight side. Open top, cone bottom. Mounted on legs. Previously used in sanitary flavors plant.

Gallons

400

Material

Stainless Steel (SS)

Manufacturer

TAN-1099

(20) 60 Cu.Ft. Stainless Steel Totes built by Gallay Systems Ltd. (GEA). 44" wide x 52" deep x 32" T/T with 36" deep Cone bottom with approx. 10" Butterfly valve with slide away security plate. 16" top opening. Approx. 450 Gallon. Tare wt: 295.3 KG. Units have forklift slots, portable. Last used as Product transfer bins in sanitary application in pharmaceutical plant.

Gallons

450

Material

STAINLESS STEEL

Manufacturer

GALLAY SYSTEMS (GEA)

TAN-928

Used 450 Gallon Sanitary Stainless Steel tank. 4' dia. x 4'10" T/T. Unit built by Harry Holland and Son. Has hinged lid. Slope bottom with 3" Side bottom outlet. Has inside partition that is open on the bottom middle. Last used in Sanitary application in Fruit Juice. JP-T1

Gallons

450

Material

STAINLESS STEEL

Manufacturer

Harry Holland and Son

TAN-913

used 450 Gallon Stainless Steel mix tank. 4' Dia. x 5' T/T. Flat top with 17.5" Dia. feed chute. Dish bottom with 2" valve on outlet. Philadelphia mixer. Has jacket but jacket nozzles needs repair.

Gallons

450

Material

STAINLESS STEEL

Manufacturer

TAN-1028

450 gallon stainless steel jacketed storage tank with slight cone bottom and center bottom outlet. Jacket rated 150 PSI @ 400 degF. Manuf by TOLAN. 4' dia x 5' straight side. Open top with hinged lid. Internal baffles which would make this a good tank to add a mixer for use as a jacketed mixing tank.

Gallons

450

Material

Stainless Steel

Manufacturer

TOLAN

TAN-1058

used 450 gallon stainless steel mixing tank with internal coils for heating/cooling. 4' dia x 5' straight side. Dish top and bottom. Agitator is Lightnin Dura-Mix, .3 HP, 1725/1425 RPM, 208-220/440 V, model B77R3045N-NS. 2" center bottom outlet with valve.

Gallons

450

Material

Stainless Steel

Manufacturer

TAN-260

470 Gallon Carbon Steel Tank. Hydro tested to 3 psig. Openings: Side - (1) 18" Manway on davit, (1) 3". Bottom - (1) 4" , (1) 1", 1/2" center outlet. Mounted on CS legs. Has Level Indicator.

Gallons

470

Material

CS

Manufacturer

Plant Maint Service Co

TAN-294

(1) 500 Gallon 304 Stainless Steel Tank. Flat open top and dish bottom. 2" CBO. (Clamp-on Mixers sold separately)

Gallons

500

Material

304 Stainless Steel (SS)

Manufacturer

TAN-505

500 Gallon Poly Storage Tank. Dish top, flat bottom.

Gallons

500

Material

POLY

Manufacturer

POLY PROCESSING CO.

TAN-538

500 Gallon 316 Stainless Steel Double motion Jacketed Sweep agitated Mix Kettle. Jacket rated 100 PSI @ 650 F. Has Speedaire 17:1 300FA, 3E seris, 32 HP 1750 RPM drive and Buflovak drive. Has side Scrapper Mixer. Unit is Stainless Steel with CS jacket. 6" CBO with Ball Valve. Requires approx. 25 HP motor (no motor available)

Gallons

500

Material

316 Stainless Steel

Manufacturer

BufloVak Equipment Div.

TAN-539

500 Gallon 316 Stainless Steel Double motion Sweep agitated Mix Kettle. Has Speedaire 17:1 300FA, 3E seris, 32 HP 1750 RPM drive and Buflovak drive. Has side Scrapper Mixer. Unit is Stainless Steel contacts. 6" CBO with Ball Valve.

Gallons

500

Material

316 Stainless Steel

Manufacturer

BufloVak

TAN-1013

500 gallon Mueller jacketed mixing kettle/tank. Cone bottom with sweep type agitator/mixer. Has provisions to add scraper blades (not included). Driven by 3/1.5 HP, 460 V, 1725/650 RPMi. Jacket rated 100 PSI @ 400 Deg.F. Approx. 5'4" diameter x 3' T/T plus 1'6" cone bottom. 3" Center Bottom Outlet. Previously used in sanitary application/ food plant.

Gallons

500

Material

Stainless Steel (SS)

Manufacturer

MUELLER

TAN-1005

Used Feldmeier 500 Gallon 316L stainless steel vertical sanitary mix tank. Dished top and bottom heads. Unused Top mounted Lightnin agitator, model X6Q75, 3/4 HP, 230/460 volt, 1725 rpm agitator. 4' diameter X 5' straight side. 4 legs. 3" Center bottom outlet and 3" bottom level transmitter port. Spray ball. No manway cover. Previously used in sanitary food application.

Gallons

500

Material

316L Stainless Steel

Manufacturer

FELDMEIER

TAN-1018

used approx. 500 gallon stainless steel tank. 4'6" dia x 4' straight side. Open top, cone bottom. Has bracket to mount clamp-on mixer (agitators sold separately). ~2" center bottom outlet. Mounted on legs. Previously used in sanitary flavors and fragrance plant.

Gallons

500

Material

Stainless Steel (SS)

Manufacturer

TAN-1026

used 500 Gallon LEE Sanitary Jacketed 316 Stainless Steel Double Motion Mix Tank/Kettle. Has Double motion Scraping agitator. Model 500U13S. Jacket rated 100 PSI @ 350 Deg.F. Dual heat zone jacket. NB # 2058. Has 7.5 HP, 230/460 volt, 1740 rpm motor into vari-speed gear box. 3" Ball valve outlet. Approx. 88" to top lip. Approx. 129" OAH with drive. Unit comes with control panel with chart recorder.

Gallons

500

Material

316 STAINLESS STEEL

Manufacturer

LEE

TAN-1080

***SOLD***used 500 Gallon Stainless Steel tank. Flat Bottom, Flat top with manway. 3'9" Dia. x 6' T/T. Last used in Distillery.

Gallons

500

Material

STAINLESS STEEL

Manufacturer

TAN-1071

500 gallon stainless steel jacketed mixing tank. Agitator driven by 10 HP, 230/460 V, 1740 RPM explosion proof motor. Turbine type agitator blade. Tank equipped with a baffle. 63" dia x 39" straight side. Jacket may need repair.

Gallons

500

Material

Stainless Steel

Manufacturer

TAN-1103

Used 500 Gallon Vacuum Mixing Kettle, Jacketed and equipped with Scraper agitation (sweep type) driven by 5 HP, 220/440 volt, 3 Phase, 1750 RPM input, 57 RPM output (30:1 gear ratio). Jacket Hydro-tested to 30 PSI. Sanitary construction. Dish top and Cone Bottom. Has actuator controlled top manway. 4'9" ID x 35" T/T. Approx. 9'5" OAH. Per drawing notes, tank vacuum tested at 27" Hg. 9'5" OAH. Located in Canada.

Gallons

500

Material

304 STAINLESS STEEL (304SS)

Manufacturer

CASALE

TAN-354

550 Gallon Poly Tank. 3" side btm outlet.

Gallons

550

Material

POLY

Manufacturer

TAN-902

Approx. 550 gallon stainless steel storage tank. Open top, cone bottom. 2" Center bottom outlet. Has (4) NTP fittings on bottom to mount pipe legs.

Gallons

550

Material

Stainless Steel (SS)

Manufacturer

TAN-571

550 gallon Poly tank. With (2) mixer/agitator.

Gallons

550

Material

POLY

Manufacturer

TAN-734

Qty. (2) Each: 550 gallon Poly storage. Dish top, flat bottom.

Gallons

550

Material

POLY

Manufacturer

POLY PROCESSING

TAN-1057

used 550 gallon stainless steel tank. 56" diameter x 60" straight side. Cone bottom, open top. Has plate near top lip to add clamp-on mixer (no mixer included). Mounted on skid with forklift provisions for easy portability.

Gallons

550

Material

Stainless Steel

Manufacturer

TAN-333

560 Gallon Horizontal Diesel Fuel Storage Service. End bottom has (1) 2.5" threaded opening.

Gallons

560

Material

CS

Manufacturer

TAN-359

600 Gallon Horizontal Carbon Steel Tank.

Gallons

600

Material

CS

Manufacturer

TAN-561

Qty. (2) Each: 600 gallon Poly storage tank. Open top, cone bottom.

Gallons

600

Material

POLY

Manufacturer

TAN-570

600 gallon Poly tank. With (2) mixer/agitator.

Gallons

600

Material

POLY

Manufacturer

TAN-833

600 Gallon Stainless Steel Tank. Alloy Products model 7754. 5'6" Dia. x 4' T/T. Has open top and Slant bottom. Has Jacket rated to 100 PSI (Jacket condition unknown). Comes with "anchor type" agitator.

Gallons

600

Material

STAINLESS STEEL

Manufacturer

ALLOY PRODUCTS

TAN-847

600 Gallon used Mojonnier Stainless Steel Tank with (2) Vertical Agitators and refrigeration jacket. Model 600VC. S/N 11610. Overall dimension approx. 4' w x 11' lgth. x 5'8" ht. 30 RPM mixer, 230 volt.

Gallons

600

Material

STAINLESS STEEL

Manufacturer

MOJONNIER

TAN-1017

used approx. 600 gallon stainless steel tank. 4'6" dia x 5' straight side. Dish top, dish bottom. 1" center bottom outlet. Top manway. Has bracket to mount clamp-on mixer (agitators sold separately). Mounted on stainless steel legs. Previously used in sanitary flavors and fragrance plant.

Gallons

600

Material

Stainless Steel (SS)

Manufacturer

TAN-828

645 Gallon Stainless Steel SaniFab Tank. (20BBL). 4'6" Dia. x 5' T/T. Dish Top and Bottom. Top manway with no cover. Has Spray ball.

Gallons

645

Material

STAINLESS STEEL

Manufacturer

SANI FAB

TAN-567

675 gallon Poly tank. With mixer/agitator.

Gallons

675

Material

POLY

Manufacturer

TAN-962

Approx. 750 gallon, stainless steel mix tank/ storage tank. 5' diameter x 5' straight side. Has agitator shaft and blades, no drive. Flat open top with hinged lids on each side. Slight cone bottom with ~ 3" Center bottom outlet.

Gallons

750

Material

Stainless Steel (SS)

Manufacturer

TAN-284

750 Gallon Fiberglass "FRP" Mix Tank built by Fibernetics. Equipped with Philadelphia Mixer, 7.5 HP, 230/460 V, 1755 RPMi, 125 RPM out.

Gallons

750

Material

FRP

Manufacturer

FIBRENETICS

TAN-285

750 Gallon Fiberglass,FRP Storage Tank.

Gallons

750

Material

FRP

Manufacturer

FIBERGLASS PRODUCTS

TAN-1050

750 Gallon 316 Stainless Steel Mix Tank. Built by AlloyFab. Rated 50 PSI Internal and 150 PSI jacket. Has dimple jacket on straight side only. Jacket on bottom head is not functional. With Chemineer model 1HTN-3, 3 HP, 230/460 volt, 1745 rpm motor, top mounted mixer.

Gallons

750

Material

316 STAINLESS STEEL

Manufacturer

ALLOYFAB

TAN-583

750 Gallon, 316L Stainless steel tank. Rated 6 PSI.

Gallons

750

Material

316 L SS

Manufacturer

Modern Welding

TAN-661

750 Gallon, Stainless Steel jacketed mix tank. Has 2 HP, 3ph, 208/440 volt, 1725 rpm drive into Falk gear with 50:1 ratio. Has sweep type mixer. Tank OD is 5'2" dia. x 8' ht. Jacket may need repair.

Gallons

750

Material

Stainless Steel

Manufacturer

TAN-569

750 gallon Poly tank. With (2) mixer/agitator.

Gallons

750

Material

POLY

Manufacturer

TAN-859

800 Gallon Stainless Steel Mix Tank. 4'6" Dia. x 6'6" Straight Side. Dish top and Bottom. 3/16" Wall thickness. 4" CBO. 18" Top manway (no cover). Lightnin model 81-C-3, 3 HP, 1740 RPM, 230/460 volt. motor with 17.5:1 ratio. Approx. 100 RPM output. Was mounted on legs (cut)

Gallons

800

Material

304 Stainless Steel

Manufacturer

PHILLIPS STEEL

TAN-925

used 800 gallon 316 Stainless steel mix tank. 5'6" dia. x 4'6" T/T. Approx. 12' OAH. Dish bottom on legs. Bolt-on dish top. Has top mounted 1.5 HP Chemineer VMB-15, 1150 RPM mixer. 2" Outlet with valve. Tank built by Industrial Piping.

Gallons

800

Material

316 STAINLESS STEEL

Manufacturer

INDUSTRIAL PIPING

TAN-911

used 800 Gallon Crepaco Jacketed Mix tank/processor kettle with Sweep agitation. Jacket rated 50 PSI. Dish top and Cone Bottom. Drive is dual HP: 2 HP 1740 rpm, 230 volt/ 1HP, 870 rpm, 230 volt into Reliance gearbox rated 14/7 rpm output. Has baffle and spray ball. Approx. 7' OD x 10' OAH without mixer drive. Last used in food plant in sanitary application.

Gallons

800

Material

STAINLESS STEEL

Manufacturer

CREPACO

TAN-846

800 Gallon used Mueller Stainless Steel Tank with vertical Agitation and Refrigeration jacket. Model OH. S/N 10606. Sanitary construction. Overall dimensions 6'w x 7'3" lgth. x 6'2" Ht. Mixer is 1/12 HP, 230 volt, 30/36 RPM.

Gallons

800

Material

STAINLESS STEEL

Manufacturer

MUELLER

TAN-906

800 Gallon, 316 Stainless Steel Tank. Industrial Pipping Inc. 1.5" CBO w/ valve. Bolt-on removable head. Chemineer Mixer and Gear Reducer, Model# 2HTL-3, 3 HP, rated 1800 RPMi/56 RPMo, Lesson Motor 1760 RPM, 208-230/460 V, 3HP.

Gallons

800

Material

316 SS

Manufacturer

Industrial Piping Inc.

TAN-987

used (4) Compartment Insulated Flavor Tank with (2) 800 Gallon and (2) 400 Gallon Agitated Compartments, Stainless Steel. Approx. Dimensions 71" W x 87" H x 226" L. Last used in Food plant, sanitary application.

Gallons

800

Material

STAINLESS STEEL

Manufacturer

TAN-568

825 gallon Poly tank. With mixer/agitator.

Gallons

825

Material

POLY

Manufacturer

TAN-382

850 Gallon Poly Vertical Tank.

Gallons

850

Material

POLY

Manufacturer

TAN-1079

***SOLD***used 850 Gallon Stainless Steel tank. Cone Bottom, Flat top with manway. 4'6" Dia. x 7'2" T/T. Last used in Distillery.

Gallons

850

Material

STAINLESS STEEL

Manufacturer

TAN-1072

875 gallon stainless steel tank with (4) side baffles. 75" dia. x 46" deep. Flat top with hinged lids. 2" side bottom outlet.

Gallons

875

Material

Stainless Steel

Manufacturer

TAN-300

900 Gallon Horizontal Poly Tank. Mounted in CS Frame.

Gallons

900

Material

Poly

Manufacturer

Poly Processing Co.

TAN-572

900 gallon Poly tank. With (2) mixer/agitator.

Gallons

900

Material

POLY

Manufacturer

TAN-1023

used 950 gallon stainless steel mixing tank. 5' dia x 6'6" straight side. 1.5" side bottom outlet with sump for full drainage. Cone top. Has 2 HP, 230/460 volt clamp-on mixer. 17" x 20" top manway for easy access. Previously used in sanitary food plant.

Gallons

950

Material

Stainless Steel (SS)

Manufacturer

TAN-526

Qty. (2) Each: 1000 Gallon Vertical Poly Tank. Open top & flat bottom.

Gallons

1000

Material

Poly

Manufacturer

CHEM-TAINER

TAN-961

used approx. 1000 gallon stainless steel jacketed kettle, jacketed mix tank. Sweep type mixer/agitator. Approx. 58" dia x 8' straight side, 12'6" overall height. 2" Center bottom outlet. Previously used in sanitary application.

Gallons

1000

Material

Stainless Steel (SS)

Manufacturer

TAN-1074

***SOLD***used 1000 gallon LEE Double Motion Jacketed Mix Kettle. Model 1000D9MS, Double Motion Sweep Scraping Agitator with 25 HP, 230/460 volt Motor with Gearbox. Stainless Steel. Last used in Sanitary Food Plant. Jacket rated 25 PSI @ 268 Deg. F. NB 8759

Gallons

1000

Material

STAINLESS STEEL

Manufacturer

LEE

TAN-1102

used 1000 gallon stainless steel tank. Heavy duty 1/4", 304L SS construction. Rectangular 12'L x 4'W x 3'Deep. Has (8) 1" threaded nozzles for multiple access ports or simply screw in a plug to close unused ports. Possible uses as dip tank or filtering tank.

Gallons

1000

Material

304L Stainless Steel

Manufacturer

TAN-1081

***SOLD***used 1000 Gallon Stainless Steel tank. Cone Bottom, Flat top with manway. 5' Dia. x 6'6" T/T. Last used in Distillery.

Gallons

1000

Material

STAINLESS STEEL

Manufacturer

TAN-1083

***SOLD***used 1000 Gallon Stainless Steel tank. Cone Bottom, Flat top. 5'8" Dia. x 4'11" T/T. Last used in Distillery.

Gallons

1000

Material

STAINLESS STEEL

Manufacturer

TAN-1084

used 1100 Gallon Stainless Steel Mix Tank. 3 HP mixer drive. Slope bottom, Dish top with manway. 6' Dia. x 5' T/T. Last used in Distillery.

Gallons

1100

Material

STAINLESS STEEL

Manufacturer

TAN-1085

used 1100 Gallon Stainless Steel tank. Cone Bottom, Flat top with manway. 5'9" Dia. x 6' T/T. Last used in Distillery.

Gallons

1100

Material

STAINLESS STEEL

Manufacturer

TAN-1082

used 1200 Gallon Stainless Steel tank. Cone Bottom, Flat top with manway. 5'6" Dia. x 7' T/T. Last used in Distillery.

Gallons

1200

Material

STAINLESS STEEL

Manufacturer

TAN-508

1300 Horizontal Carbon Steel Tank. Rated for 14 PSI. 0.375" wall thickness. Last used for Hot Oil.

Gallons

1300

Material

CS

Manufacturer

SGL

TAN-946

Used LEE 1500 Gallon, Jacketed Kettle model 1500U9MS with Double Motion Scraper agitation (sweep). Jacket rated 125 PSI @ 353 Deg.F. Jacket on bottom head needs repair. Equipped with an SEW Euro Drive with 1-15 HP, 230/460 volt and 1-10 HP 230/460 volt motor into Gearbox with 3.1-18.6 RPM output. NB # 7998, S/N 12343-1-3. Built 1999. Dish top, dish bottom. Shipping dimensions are approx. 88" wide and high x 15' lgth each. Unit has an opening in the outside shroud that shows the 1/2 pipe jacket. Last used in sanitary application in food plant. (2) Similar units TAN-948 and TAN-947.

Gallons

1500

Material

316L STAINLESS STEEL

Manufacturer

LEE

TAN-368

1500 Gallon Stainless Steel Tank. Has 5' cone btm. Has 7 wraps of 2" coils rated 100 PSIG @335 degF. Equiped with ProQuip Agitator rated 1/2 HP, 1800 RPM/ 87 RPM output, 230/460/3/60, 1.5" 304 SS Shaft, 3 Blade. Quoted As Is, Where Is (AIWI).

Gallons

1500

Material

304 SS (stainless steel)

Manufacturer

BENDEL

TAN-392

1500 Gallon Stainless Steel, Clad Tank. Has Philadelphia Mixer PTE-16 with 25 HP motor, RPM input 800, output 37. Ratio is 47.3.

Gallons

1500

Material

SS CLAD

Manufacturer

TAN-942

used 1500 Gallon Stainless steel Mix tank with Flat top, Cone bottom. 6'D X 7'8" straight side, 13' High with agitator. Bridge mounted .3 HP Lightning model XJQ-30 mixer, 60/50 Cyc. 208-220/440, 1725/1425 rpm, 1.4-1.4/7 amp. Bottom of mixer blade is approx. 3' from bottom of cone. Approx. 10" Dia. mixer prop. Cone is approx. 16" deep. Mounted on (4) Stainless steel legs, 3" CBO, 21" top manway, with 6 top inlets; 2-4" triclover fittings. Last used in Sanitary application in Fruit Juice.

Gallons

1500

Material

STAINLESS STEEL

Manufacturer

TAN-948

Used LEE 1500 Gallon, Jacketed Kettle model 1500U9MS with Double Motion Scraper agitation (sweep). Jacket rated 125 PSI @ 353 Deg.F. Equipped with an SEW Euro Drive with 1-15 HP, 230/460 volt and 1-10 HP 230/460 volt motor into Gearbox with 3.1-18.6 RPM output. NB # 7999, S/N 1234-1-5. Built 1999. Dish top, dish bottom. Shipping dimensions are approx. 88" wide and high x 15' lgth. Last used in sanitary application in food plant. Jacket condition unknown and may need repair. (2) Similar units TAN-946 and TAN-947.

Gallons

1500

Material

316L STAINLESS STEEL

Manufacturer

LEE

TAN-947

Used LEE 1500 Gallon, Jacketed Kettle model 1500U9MS with Double Motion Scraper agitation (sweep). Jacket rated 125 PSI @ 353 Deg.F.. Equipped with an SEW Euro Drive with 1-15 HP, 230/460 volt and 1-10 HP 230/460 volt motor into Gearbox with 3.1-18.6 RPM output. Dish top, dish bottom. Shipping dimensions are approx. 88" wide and high x 15' lgth. NB 11319, s/n 53113-2. Built in 2008. Last used in sanitary application in food plant. (2) Similar units TAN-946 and TAN-948.

Gallons

1500

Material

316 STAINLESS STEEL

Manufacturer

LEE

TAN-390

1550 Gallon Stainless Steel Tank. Rated for 2 PSI & partial vacuum @ 200 deg F. 3" CBO (center bottom outlet). Has Dished bolt on top. On 4 legs.

Gallons

1550

Material

304 SS

Manufacturer

NEWARC WELDING CORP

TAN-993

1800 Gallon Poly Tank on Skid. Horizontal.

Gallons

1800

Material

POLY

Manufacturer

TAN-597

2000 gallon horizontal Stainless steel tank.

Gallons

2000

Material

Stainless Steel

Manufacturer

Cream City Fabricators

TAN-605

2000 Gallon Double wall self containment tank. UL labeled for flammable liquid storage. Horizontal. Dimensions: 25'10" L x 4' W x 3'6" HT. UL nameplate reads: Underwriters Laboratories Inc., Listed Secondary Containment above ground storage tank for flammable liquids No. 584026, not for use underground.

Gallons

2000

Material

CS

Manufacturer

LUBE CUBE

TAN-887

used 2000 Gallon Mueller horizontal Jacketed, sanitary Mix tank. Model OP. Jacket rated 265 PSI @ 170 F. Top mounted mixer. Dimensions are approx. 7'8" wide X 5'8" Ht (7'OAH including mixer) x 13' lgth. (add 13" for ladder and jacket connections).

Gallons

2000

Material

STAINLESS STEEL

Manufacturer

PAUL MUELLER

TAN-1008

Used 2000 gallon APV Crepaco stainless steel sanitary jacketed process mix Tank/Kettle. Jacket rated 94 PSI @ 200 Deg.F. 96" diameter X 72" high. Approx. 8'6" OAH. Dished top. Top bridge mounted drive with 5 HP, 1725, 3 ph, 240/480 volt mixer into 40.36:1 gear reducer. Sweep agitator. Side bottom outlet. Side entering manway. 3" Side outlet. Serial Number E-2306. NB # 6509. Previously used in sanitary food application.

Gallons

2000

Material

STAINLESS STEEL

Manufacturer

APV CREPACO

TAN-1009

Used 2000 gallon APV Crepaco stainless steel sanitary jacketed process mix Tank/Kettle. Jacket rated 94 PSI @ 200 Deg.F. 96" diameter X 72" high. Approx. 8'6" OAH. Dished top. Top bridge mounted drive with 5 HP, 1725, 3 ph, 240/480 volt mixer into 40.36:1 gear reducer. Sweep agitator. Side bottom outlet. Side entering manway. 3" Side outlet. Serial Number E-2304. NB # 6599. Previously used in sanitary food application.

Gallons

2000

Material

STAINLESS STEEL