Item # EVAP-21
***SOLD***This is a 2,050 lb/hr APV 1 effect Finisher Evaporator. Type P-E, Serial number 1340. It employs a forced circulation rising-falling film principle of evaporation. This unit includes the evaporator frame with 16 each type 316 stainless steel plate units (65 plates total), one type 316 stainless steel 30.5" snail shell vertical separator, one type 304 stainless steel barometric condenser with a steam ejector and the interconnecting vapor tubing. This unit was designed for a feed rate of 5590 lbs/hr @ 190F, Feed concentration of 9.0% suspended solids and 20.20% soluble solids, Product rate of 3540 lbs/hr, Product concentration of 31.9% soluble solids @ 185F. Evaporation rate of 2050 lbs/hr. It was originally designed for 19 plate units, 3 are missing so the evaporation rate will be less than designed as equipped. Additional plate units may be added to bring the evaporation rate back to the designed rate. Overall Foot print is 8' w x 9' l x 8'2" h. Can be broken down for shipping. Last processing spent mash. Plate gaskets appear to be in good shape. Good condition.
Item # EVAP-16
used approx. 35 Sq.Ft Thin Film Evaporator (TFE) "Turba-Film Processor". Built by Rodney Hunt (LCI), model 18-090, s/n T-18-090-63-1. 18" Dia. x 8' T/T. 316 Stainless Steel contact parts. Unit rated 15/FV PSI @ 400 Deg.F internal and 150 PSI @ 400 Deg.F Jacket. NB # 284. Vertical wipe film vessel with top mounted 25 HP belt drive motor , vertical condenser and control panel. Skid is approx. 104" wide x 92" x 15' OAH. 14" OD barometric condenser 15'8" L main section. Off shoot section near top is 12" dia x 7' L. Last used in food plant condensing proteins.
RODNEY HUNT (LCI)
Item # EVAP-18
***SOLD***Used ARTISAN 1 Square Foot Rototherm Thin Film Evaporator. Stainless steel construction. Rated at 60 PSI/FV @ 300 Deg.F. internal. Jacket rated at 100 psi @ 300 Deg.F. NB# 2346. S/N 86095. Motor is 0.5/3 HP, 175/1175 rpm, 42-230/84-4 volt, 3 Ph. UL Calls 1 Group C&D for Hazardous locations (XP). Has Reliance SP500 VS-drive. Mounted on Stainless steel frame on wheels. Last used in sanitary pharmaceutical application. Overall dimensions are approx. 6' Lgth. x 3' wide x 5'2" ht. Vapor outlet is 3" and Process bottoms outlet is 2".
Item # EVAP-22
Rodney Hunt 97 sq ft, Turba-Film thin film evaporator. Constructed of 316 stainless steel. Serial number T-30-144-63-1, National Board # 287. Thin film evaporator is rated for 150 psi @ 400° F on the jacket and 15 psi @ 400° F internally. Evaporator has a 4" flanged conical positive discharge, 3" flanged product inlet, and a 15" flanged vapor discharge. Overall dimensions are 4' diameter x 22' long. Good condition.
used Vacuum Kettle Distillation System Skid Includes 400 Gallon LEE Jacketed Vacuum Rated Mix Kettle for sale
Item # EVAP-24
***SOLD*** used Vacuum Kettle Distillation System. Skid Includes 400 Gallon LEE Jacketed Vacuum Rated Mix Kettle with Scrape Agitation. Model 400D7S. Sanitary Vessel Rated for Full Vacuum. Jacket Rated 90 PSI @ 332 Deg.F. Agitator is 3/2 HP, 230/460-190/380 Volt, 1760/1460 rpm into gear box with 18:1 ratio. National Board# 6444. Kettle is 13' OAH x 5'3" OD at the jacket. 3" CBO and has a level gage with readout. Skid also includes (1) Waukesha Model 18/U2 lobe pump, Fristam centrifugal pump, Alfa Laval model M10 Plate heat exchanger, control panel and flow meter.
Item # EVAP-12
***SOLD*** Used CHEMTEC/ARMSTRONG Wiped Film / Scraped surface exchanger / Crystallizer / Evaporator. 316 Stainless Steel contacts. 324mm dia. x 9130 mm jacketed length. Approximately 100 sq.ft. surface area. 10500 mm overall length. 3 HP gearmotor, 415 vac/3ph/50 hz, flame proof drive, Approximately 10 RPM output. Rated 10 kg/cm2 @ 50 C or -28.8 C. (142 PSI @ 122 F or - 19.8 F). Last used as Menthol crystallizer.
Item # EVAP-19
***SOLD***Used Pfaudler wiped film evaporator system. Includes 4.2 sqft evaporator. 12" diameter. Rated atmospheric/Full vacuum @ 700 degrees F and 155/140 @ 700 degrees F jacket. 5 hp 4 DTW drive, variable speed 50-280 rpm. Contacts T316L stainless steel. Pfaudler SN R586-3037. NB 44316. Built 1986. External condenser Built by Doyle & Roth. Tubes stainless steel rated 125 PSI @ 350 degrees F. Shell carbon steel rated 125 PSI @ 350 degrees F. Stainless steel heads. Has (12) twelve wiper blades, PTFE, glass filled and slotted.
Item # EVAP-23
***SOLD*** used Alfa Laval Convap Sanitary Scraped Surface Evaporator model 6X3. 3 SQ.FT.. Internal rated 450 PSI @ 315 Deg.F. Max. Jacket rated 225 PSI @ 315 Deg.F. S/N HC3477NCC. Main Motor is 5 HP, 208-230/460 volt, 3 Ph, 60 Hz, 15-13.2/6.6 amp. Mounted on S/S Pedestal. Unit is suited for concentrating viscous, sticky and/or heat sensitive products that tend to cause fouling in static types of heat exchanger. Video of unit running available.