EcReCon, Inc. Buys and Sells Surplus and Used Process Equipment from Individual items to Complete Plants, including Property for the Chemical, Pharmaceutical, Food, Petrochemical,  Plastics, and Cosmetics Process Industries. We stock acres of process equipment at our storage and warehouse locations.  

used Fluid Air Laboratory Scale Fluid Bed Dryer, M

used Fluid Air Laboratory Scale Fluid Bed Dryer, Model 2. 240 Volts, 1 Phase, with Accessories. S/N SN10219. Last used in sanitary food plant.

used 120 Cu.Ft. S. HOWES Stainless Steel Ribbon Bl

used 120 Cu.Ft. S. HOWES Stainless Steel Ribbon Blender. Driven by 40 HP, 208-230/460 volt motor into Gear reducer. Trough is 144" lgth. x 48" deep x 45" wide. (2) 20HP Bottom Side Entering Choppers/Lumpbreaker Drives with shafts and blades. 14" Center Bottom Discharge with Gemco Discharge valve with actuator. Can come with Premier Pneumatics Receiving Hopper and screw conveyor for additional charge (Item# FC-98). Last used in Food Plant (Bakery).

used Cornell Vacuum Deaerator/Defoamer Model D-8 V

used Cornell Vacuum Deaerator/Defoamer Model D-8 Versator. SN: 5863. 8" Dia. Disc. Nominally rated up to 2 GPM. Driven by 1.5 HP, 1800 RPM, 220 Volt, 3 Ph. vari-speed drive. 1/2" Inlet/outlet. Mounted on cart with wheels. Last used in sanitary plant.

UNUSED Graco Model SF3AF1 3150 Sanitary 3" Air Dia

UNUSED Graco Model SF3AF1 3150 Sanitary 3" Air Diaphragm Pump. SaniForce. Rated approx. 130 GPM. Seris 02D15F.

used 150 Gallon Feldmeier Double Motion Jacketed M

used 150 Gallon Feldmeier Double Motion Jacketed Mix Kettle with Tilt capability. 316L Stainless Steel. Has Hydraulic Tilt Mechanism. Agitation is 5 HP 20 RPM Scrape Surface Agitation & 5 HP 48 RPM (2) Bladed Turbine Agitation. 3" Tri Clamp outlet. Jacket rated 150 PSI @ 400 Deg.F. Nat'L BD: 5012. S/N E-247-99. Approx 44" dia. x 34" Deep. Video of unit running available.

***SOLD*** used Alfa Laval Convap Sanitary Scraped

***SOLD*** used Alfa Laval Convap Sanitary Scraped Surface Evaporator model 6X3. 3 SQ.FT.. Internal rated 450 PSI @ 315 Deg.F. Max. Jacket rated 225 PSI @ 315 Deg.F. S/N HC3477NCC. Main Motor is 5 HP, 208-230/460 volt, 3 Ph, 60 Hz, 15-13.2/6.6 amp. Mounted on S/S Pedestal. Unit is suited for concentrating viscous, sticky and/or heat sensitive products that tend to cause fouling in static types of heat exchanger. Video of unit running available.

used Votator Horizontal Mixer, Whipper-Emulsifier.

used Votator Horizontal Mixer, Whipper-Emulsifier. Model CR6. Has 5 HP Motor, 220/460 Volts, with S/S Square D Safety Switch. S/N 72 026V. Design Operating Product Pressure 250 PSI @ 100 Deg.F. Last used in sanitary food plant. Mounted on Portable S/S Frame

used Kason Rotary Centri-Sifter Model M.9020.S.O.3

used Kason Rotary Centri-Sifter Model M.9020.S.O.35859. Stainless Steel. 12" x12" Inlet hopper. Approx 8" x 20" screen. Approx 5.5" overs outlet and 7" Fines outlet. Overall 3'4" wide x 5'6" lgth. x 6' ht.

***SOLD*** used 35 Cu.Ft. Marion Sanitary Stainles

***SOLD*** used 35 Cu.Ft. Marion Sanitary Stainless Steel Paddle Blender with (2) high speed choppers. Trough has a center bottom outlet (with slide valve), and it is 32" x 72", giving a total capacity of approx 40 cu.ft. The blender has packing glands and outboard roller bearings. The shaft is driven by a 15 HP motor (3/60/230-460V), through a "V" belt drive to a shaft mounted torque arm reducer. The trough has a fixed safety grate. The unit has two choppers. This blender has bolt on legs, putting the outlet 36" off the floor. Appears to be a Marion, no nameplate present.

used 20 Gallon Jacketed Double Motion Mix Kettle/V

used 20 Gallon Jacketed Double Motion Mix Kettle/Vessel with sweep mixer with scraper blades and Shaft with (2) mix props. Walker model PZ-K-VP. Jacket rated 100 PSI @ 360 Deg.F.. Vessel rated 15 PSI /-15 PSI Vacuum. NB# 3317. Video of unit running available. Last used in sanitary application.

(10) used Mueller 20 CU.FT. (140 Gallon) Stainless

(10) used Mueller 20 CU.FT. (140 Gallon) Stainless Steel Portable Powder Totes with discharge butterfly valves, 42" x 42" x 42". 8" straight side with 32" deep cone. 18" top opening with Lid. Last used in Sanitary application.

used Witte Fluid Bed Dryer. Stainless Steel. Appro

used Witte Fluid Bed Dryer. Stainless Steel. Approx. 22" wide X 7' Lgth. S/N FP-1529. Unit has dust collector housing (no top manifold, cages, blower or heater). Motor is 1 HP, 230/460 volt, 1745 rpm, 60 cyc, 3 ph.

used Waukesha model 2085LV sanitary centrifugal pu

used Waukesha model 2085LV sanitary centrifugal pumps. 2"x1.5". Rated approximately 145 gallons per minute/ 330 Ft.Hd. . Driven by 10 HP, 208-230/460 volt motors.

used Flexicon Flexible Screw Feeder with Explosion

used Flexicon Flexible Screw Feeder with Explosion proof motor and Stainless Steel Hopper. Hopper is 3' x 3'x 3' deep. Has 9' Overall length Flexible screw. Plastic conveyor tube housing is cracked and needs to be replaced. 2 HP, 208-230/460 volt XP motor.

used Terlet Terlotherm Model T0 Scraped Surface He

used Terlet Terlotherm Model T0 Scraped Surface Heat Exchanger, wiped film. 32 Liter capacity. Jacket rated 3.5 Bar @ 150 Deg.C. 316L Stainless steel. Has wheels to make portable. Jacket pressure tested and Video of unit running available.

used 10 CU.FT. Sanitary Stainless Steel Ribbon Ble

used 10 CU.FT. Sanitary Stainless Steel Ribbon Blender built by Hayes & Stolz. Model HR10-0199SSS, serial#A100801. 304 stainless steel 10 gauge Interior surfaces polished to 180 grit finish. Exterior surface glass bead blasted finish. 44in x 22in x 26in deep. Split shaft seals with CINCH SEAL GASKET system. 6in discharge port with Salina vortex gate. Two piece Stainless steel split cover with safety grid. 5-HP, 3 phase, 60 cycle, 230/460 volt motor. Control panel with motor starter. Video of unit running available.

used Mueller 250 Sq.Ft. Sanitary Plate Heat Exchan

used Mueller 250 Sq.Ft. Sanitary Plate Heat Exchanger, Model AT20SS F-10. S/N 223807 Rated 100 PSI @ 150 Deg.F. 1-Section with Aprox. (82) 1' x 3' Stainless Steel Plates. Sq.Ft. is approximate. Overall Dims.: Aprox. 49" L x 17" W x 36" Deep, with S/S Legs

used 50 Gallon Sanitary Jacketed Portable Stainles

used 50 Gallon Sanitary Jacketed Portable Stainless Steel Mix Tank/Pasteurizer. Built by Crepaco. Jacket rated 75 PSI @ 315 Deg.F.. Mixer is 1/2 HP, 1725 rpm Agitator, 230/460 V, 3 Phase, 1.5 " Outlet with valve. Hinged lids. 2' Dia. x 2'6" deep. 54" ht without wheels.

used Star Filter Stainless Steel Filter Press 18"

used Star Filter Stainless Steel Filter Press 18" Dia Plates. Has (19) 18" Dia Stainless Plates plus (2) End plates. Approx. 2" Cake thickness. 2" Connections. Overall dimensions 8'6" lgth. x 33" wide x 56" ht. Last used in Sanitary plant.

used Inclined Screw Feeder/Conveyor, Stainless Ste

used Inclined Screw Feeder/Conveyor, Stainless Steel. Screw is 9" Dia. X 15' long. Discharge height is 70". Screw has 2.75" flights x 8" space between flights with 3.5" dia. shaft. Outlet is 9" x 9". Inlet has a 4' wide x 3' chute feeding into a 15" x 16" Inlet. Inlet chute is 38" off ground. Driven by a 1/2 HP, 208-230/460 volt, 1145 rpm motor into a gear reducer with 57.29:1 ratio. Overall Dimensions 89" ht. x 5' wide x 16'6" lgth. Last used in a Sanitary application.

used Inclined Screw Feeder/Conveyor, Stainless Ste

used Inclined Screw Feeder/Conveyor, Stainless Steel. Screw is 12" Dia. X 9'10" long. Discharge height is 7'2". Screw has 4.5" flights x 9" space between flights. Outlet is 13" wide x 9". Inlet Hopper is 29" wide x 27" and 35" off the ground. Driven by a 5 HP, 230/460 volt, 1750 rpm motor into a gear reducer. Overall Dimensions 9'3" ht. x 3'6" wide x 10' lgth. Last used in a Sanitary application.

used 100 gallon Sanitary Stainless Steel Jacketed

used 100 gallon Sanitary Stainless Steel Jacketed Tank. Dish bottom, portable on wheels/casters. Jacket rated 20 PSI. 30" diameter x 36" T/T. 60" overall Height. 1.5" Center Bottom Outlet. Previously used in sanitary food plant. Could possibly add clamp-on agitator to make it jacketed mixing tank.

UNUSED Busch vacuum pump model R5/RA 1000B. Rated

UNUSED Busch vacuum pump model R5/RA 1000B. Rated 710 ACFM. Oil-Lubricated Rotary Vane Vacuum Pump. Inlet 6", outlet 4". S/N#C1524000277. 30 KW motor.

used Busch Vacuum Pump Type RC0630B4Z61028. Rated

used Busch Vacuum Pump Type RC0630B4Z61028. Rated 490 CFM at 15 Torr. Motor is 25HP, 230/460 volt, 1170 RPM. S/N C8142. Dry type.

Used Rotex Model 42A-AL-SS Screener. 42" wide X 8'

Used Rotex Model 42A-AL-SS Screener. 42" wide X 8'6" long (Approx. 11'2" L x 5' W overall). 2 HP Drive. Last used in sanitary application.

used 850 Gallon Stainless Steel Tank. 5' Dia. x 6

used 850 Gallon Stainless Steel Tank. 5' Dia. x 6' T/T. Built by SaniTank. Slope bottom with 2" outlet. Flat top with 20" Manway and 8" opening for clamp on mixer (no mixer included). 8' OAH. Last used in food plant in sanitary application.

used 850 Gallon Stainless Steel Tank. 5' Dia. x 6

used 850 Gallon Stainless Steel Tank. 5' Dia. x 6' T/T. Dish bottom with 1.5" outlet. Dish top with 20" Manway and 10" opening for clamp on mixer (no mixer included). 8'4" OAH. Last used in food plant in sanitary application.

APV model DW5/142/15 Rotary Lobe Pump. 3" tri-clov

APV model DW5/142/15 Rotary Lobe Pump. 3" tri-clover inlet/outlet. Driven by 25 HP, 1770 RPM motor into gear with 2.7:1 ratio. Unit mounted on cart with wheels/casters. Last used in Sanitary Application.

High Shear Reversible Homogenizer/Disperser/Emulsi

High Shear Reversible Homogenizer/Disperser/Emulsifier for high shear batch processing. Top mounted mixer. Driven by 7.5 HP, 230/460 Volt, 3450 RPM, UL Explosion Proof (XP) Motor. Shaft is 49" L. Unit is 78" Overall Height. Previously used in sanitary application. Video of unit running available.

used 900 Gallon, 2100 PSI, 316L Stainless Steel Hi

used 900 Gallon, 2100 PSI, 316L Stainless Steel High Pressure vessel. Rated 2100 PSI@ 725 Deg.F. 4' dia x 7' T/T (17'3" Overall Height). Vertical mounted on Skirt. Built by Fabwell Corporation. NB # 1842. Wall thickness is 3.75", Head thickness is 1.75". High Pressure, High Temperature. Drawings on file.

UNUSED 150 Sq.Ft. ITT Standard Shell and Tube Heat

UNUSED 150 Sq.Ft. ITT Standard Shell and Tube Heat Exchanger. Stainless Steel Tubes rated 150 PSI @ 300 (-20) Deg.F. Approx (120) 1/2" ID x 10' lgth.. Shell is 10" Dia. Carbon Steel rated 150 PSI @ 300 (-20)Deg.F. Approx 12'6" OAL. Connections are 6". National Board # 223675

UNUSED United Conveyor Corporation Crusher/Grinder

UNUSED United Conveyor Corporation Crusher/Grinder. Product No. 2103-123-040 20. 33" Crusher.

FranRica 14-Pass Dimpled Tube in Tube Heat Exchang

FranRica 14-Pass Dimpled Tube in Tube Heat Exchanger/Pasteurizer. Has 2" ID and 4" OD x 19'10" Lgth tubes. Sanitary Construction. Model # OES01-CX-01. Dimple tube design provides enhanced heating, cooling and drainage advantages. Overall Dims.: Aprox. 250" L x 48" W x 72" H

used TriClover Tri-Blender. Model F3218MD-MBV. Has

used TriClover Tri-Blender. Model F3218MD-MBV. Has 4" Powder inlet, 1.5" Liquid inlet and 2" outlet. Mounted on stainless steel base with 15 HP, 230/460 volt, 3510 rpm motor. Last used in Food Flavors plant. Sanitary construction.

(2) used 1200 Gallon (4500 Liter) Sanitary Jackete

(2) used 1200 Gallon (4500 Liter) Sanitary Jacketed Mix Tanks. Built by JV Northwest. Shell is 316L Stainless Steel and rated 25 PSI @ 100 Deg.F. Jacket rated 50 PSI @ 100 Deg.F. Top mounted Lightnin Mixer. Approx. 79" Dia. NB # 123 and 124

used Fluid Energy ALJET Air Jet Mill/Micronizer. 8

used Fluid Energy ALJET Air Jet Mill/Micronizer. 8" Diameter model. Stainless Steel. Rated 3-100 LBS/Hr.. 50-150 ACFM. Has Schenck Process AccuRate Screw Feeder. Sanitary from Pharmaceutical plant.

used 2000 Gallon, 2100 PSI, 316 Stainless Steel Hi

used 2000 Gallon, 2100 PSI, 316 Stainless Steel High Pressure vessel. Rated 2100 PSI @ 300 Deg.F. 5' dia x 10' T/T (____ Overall Length). Horizontal. Built by Heater Specialists, LLC. NB # 1842. Wall thickness is 3.5", Head thickness is 1.75". Previously used as Cold Separator Drum in oil refinery application. Drawings/info on file.

(20) used 500 Liter (17 Cu.Ft) Sanitary 316 Stainl

(20) used 500 Liter (17 Cu.Ft) Sanitary 316 Stainless Steel Totes. Stackable. Equipped with dump brackets on 2 sides. Built by Ace. 8" Butterfly valve discharge. 1'4" top opening. 36" x 36" x 56" OAH.

UNUSED Russell Finex Self Cleaning Liquid Filter m

UNUSED Russell Finex Self Cleaning Liquid Filter model 803. 3" Inlet/Oulet. 316 Stainless Steel. Has electric drive with wipers to give continuous cleaning of filter surface. Includes Tilting portable stand and Filter management system. Cost new $36000.

used 2400 liter Fryma VME-2400 Vacuum Processing V

used 2400 liter Fryma VME-2400 Vacuum Processing Vessel/Kettle, Dual Shaft, Sanitary construction, 2400 Liter (630 Gallon) working capacity. There are two agitator drives. A 7.5 hp motor drives a center 3 blade counter rotating agitator and a scrape agitator through a chain drive. A 50 hp motor drives a disperser type agitator off to the side of the center shaft. Working temperatures are 150 Deg.C (302 Deg.F.)for the interior and the jacket. The interior has a pressure rating of -1/+1 bar and the jacket has a 2.5 bar rating. The top has an 8" flanged opening that can be used for a colloid mill (not included) currently it is clamped shut and 6" glass inspection port with light. Top also has a 2" sanitary, 1.5" sanitary and (2) 1" threaded fitting. The bottom has a 6" sanitary discharge with a pneumatically operated valve. Requires 230/460 vac 3 ph electrical supply. Previously used for toothpaste. Tri-Shaft

*20% OFF* APV model R6BS Rotary lobe pump. 3" thre

*20% OFF* APV model R6BS Rotary lobe pump. 3" threaded inlet/outlet. Driven by 7.5 HP, 230/460 Volt, 1725 RPM motor into gear with 11.4:1 ratio. Unit mounted on Stainless Steel base. Rubber lobes. Last used in sanitary food plant, bakery. Dough pump.

*33% OFF* 20 Cu.Ft. Twin Shell Blender Patterson K

*33% OFF* 20 Cu.Ft. Twin Shell Blender Patterson Kelley. 5 HP, 208-220/440 V, 1750 RPMi, 100 RPMo, 17.1:1 ratio. Stainless Steel

*25% OFF* used 30 Cu.Ft. DAY Ribbon Blender. Stai

*25% OFF* used 30 Cu.Ft. DAY Ribbon Blender. Stainless steel construction. Trough is 30" wide X 78" lgth X 33" Deep. Has 4" Center bottom outlet. Capacity is approximate. Unit has Motor and chain for drive. Last used in spice blending plant. Can come with top mounted dust collector.

*25% OFF* used 20 Cu.Ft. SCOTT Stainless Steel Rib

*25% OFF* used 20 Cu.Ft. SCOTT Stainless Steel Ribbon Blender. Trough is 30" wide X 48" lgth X 36" Deep. Has 4" Center bottom outlet. Capacity is approximate. Last used in spice blending plant. Can come with top mounted dust collector.

***SOLD*** used 270 Cu.Ft. Sanitary Stainless Stee

***SOLD*** used 270 Cu.Ft. Sanitary Stainless Steel Ribbon Blender. Built by American Process Systems. Model U270-5722, Type DRB-270. Approx 12'L X 5'W X 6'D, 75 HP, 208-230/460 volt, 1180 rpm motor into gear reducer, approx. 25 RPM output ribbon. (2) 8" X 8" discharges on bottom ends with air operated gate valves. Mounts for 4 side choppers, 2 on each side. (2) 26" top inlets/man ways with lift out magnetic bars and lids. (1) top 18" X 30" opening with screen. Includes control panel. Last used in a sanitary application in a food plant. Agitated surge blender.

***SOLD*** 150 Gal JH Day Double Arm/Sigma Blade M

***SOLD*** 150 Gal JH Day Double Arm/Sigma Blade Mixer. Stainless steel construction, overlapping sigma blades, jacketed bowl, vacuum cover, 60 hp 230/460 volt XP motor, screw tilting bowl with 3 hp motor drive. Includes vapor recovery system with heat exchanger and receiver pot. Last used in medical Silicone. High viscosity mixer. Approx. 3' back to front x 3'3" wide x 3' deep. Approx. 210 gallons total volume.

Qty (4) Each: 250 gal (1000 L) Tote/Bin/Tank. Li

Qty (4) Each: 250 gal (1000 L) Tote/Bin/Tank. Liquid poly totes. 2" Side Btm Outlet. Mounted in aluminum frame with skid for easy transport. 48" x 40" x 48" H. Portable.

***SOLD*** Used Double Planetary Mixer. Believed t

***SOLD*** Used Double Planetary Mixer. Believed to be a ROSS CDM-150, 150 gallon. Unit comes with (11) 40" ID x 32" Deep, Carbon Steel Mix Cans with 4" outlets with valve. 15 HP, 1800 rpm, 208-220/440 volt, Explosion Proof motor into Delroyd gear reducer with 89.48:1 ratio (approx. 20 RPM output). It appears to be a CDM-150. **Video of unit running is available.**High viscosity mixer.

***SOLD*** used 100 CU.FT. ROSS Stainless Steel Ri

***SOLD*** used 100 CU.FT. ROSS Stainless Steel Ribbon Blender. 120" x 39" x 43" Depth of trough. Has 60 HP, 1770 rpm, 208-230/460 volt motor into dodge gear reducer with 25.66:1 ratio. 8" CBO. Overall dimensions: 183" x 78" x 57".

EcReCoN