Display:ListGrid

Mills / Grinders

Sub-Categories

US Stoneware 10 gallon pivoting jar mill model 946

Item # MIL-71

Used US Stoneware 10 gallon pivoting jar mill model 946. Reeves varispeed drive 2 hp 3 phase 60 cycle 230/460 volt 1750 belt driven. Jar mill speed 56-28 rpm. Built 1995. SN PJ96101

TYPE

BALL MILL

Manufacturer

US STONEWARE

Model

946

US Stoneware Ball/Pebble mill

Item # MIL-78

Used US Stoneware Ball/Pebble mill. Approximately 40" diameter X 44" long (approx. 200 gal). With motor, dodge reducer and stand. Stainless steel lined.

TYPE

BALL MILL

Manufacturer

US STONEWARE

Model

used Ball Mill. Approximately 30"x30" Chamber

Item # MIL-83

used Ball Mill. Approximately 30"x30" Chamber. On stand with 2 HP, 3ph, 60 cyc, 1750 rpm motor.

TYPE

BALL MILL

Manufacturer

Model

STEPHAN model VCM 40 Chopper/Mixer/Cutter

Item # MIL-31

***SOLD***Used STEPHAN model VCM 40 Chopper/Mixer/Cutter. 5.5/7.5 KW, 220 Volt, 1750/3500 RPM, 3 Ph, 60 Hz motor. 40 Quart. Mounted on Portable Stainless Steel base with steps.

TYPE

CHOPPER / CUTTER

Manufacturer

STEPHAN

Model

VCM40

Hobart model HCM-450 Cutter/Mixer/Chopper

Item # MIL-40

used Hobart model HCM450 Cutter/Mixer/Chopper. 45 Quart capacity. 5 HP, 1140 RPM, 3 Ph. motor.

TYPE

CHOPPER / CUTTER

Manufacturer

HOBART

Model

HCM 450

Premier Mill Model KSIF Colloid Mill

Item # MIL-67

Premier Mill Model KSIF Colloid Mill. Equipped with 3" rotor. 5/3 HP, 208-230/190-460/380 volt, 3510/2920 rpm motor. 1-1/2" tri-clover connections. Mounted on base with casters.

TYPE

COLLOID MILL

Manufacturer

PREMIER

Model

KSIF

Fryma Koruma MZ-190/B toothed colloid mill

Item # MIL-63

Fryma Koruma MZ-190/B toothed colloid mill for milling, dispersing and homogenizing liquid to highly viscous materials. Capacity: 2,600 to 26000 Kg/hr. Product fineness approx. 100 - 500um. Motor is 60 kw, 3540 rpm, 460 volt.

TYPE

COLLOID MILL

Manufacturer

FRYMA

Model

MZ-190

Fryma Koruma MZ-130/B toothed colloid mill

Item # MIL-64

Fryma Koruma MZ-130/B toothed colloid mill for milling, dispersing and homogenizing liquid to highly viscous materials. Capacity range approx.: 700 - 7,000kg/hr. Product fineness approx.: 100 - 500um. Motor is 22kw, 3540 rpm, 460 volt.

TYPE

COLLOID MILL

Manufacturer

FRYMA

Model

MZ-130/B

Fryma model MZ-110 Colloid Mill for sale

Item # MIL-85

***SOLD*** used Fryma model MZ-110 Colloid Mill. S/N M14753. Has 5.5 kw, 270/460 volt motor. Unit mounted on portable cart with AB Starter. Last used in sanitary food application.

TYPE

COLLOID MILL

Manufacturer

FRYMA

Model

MZ-110

Quadro Comil Model 196S Cone Mill for sale

Item # MIL-91

used Quadro Comil Model 196S Cone Mill. Stainless Steel. Has 10 HP, 208-230/460 volt, 1725 RPM motor. S/N 196-0489. Last used in a food plant in sanitary application.

TYPE

CONE MILL

Manufacturer

QUADRO

Model

196S

Plastic Granulator Ball & Jewell Mavrick model MVP810

Item # MIL-2

Granulator. Ball & Jewell Mavrick model MVP810. 5 HP, 1165 rpm, 220/440 volt motor. Unit mounted on wheels. Last used in plastic

TYPE

GRANULATOR

Manufacturer

BALL & JEWELL

Model

MVP810

Cumberland Plastic Model 8x10 Granulator

Item # MIL-3

Cumberland Model 8x10 Granulator. Mounted on wheels. Last used in Plastic

TYPE

GRANULATOR

Manufacturer

CUMBERLAND

Model

8x10

Frewitt model GLA ORV Oscillating Granulator for sale

Item # MIL-88

used Frewitt model GLA ORV Oscillating Granulator. Stainless Steel sanitary construction. 115 Volt. Includes box of screens.

TYPE

GRANULATOR

Manufacturer

FREWITT/KEY

Model

GLA ORV

Fitzpatrick Model J Homoloid Mill for sale

Item # MIL-5

Fitzpatrick Model J Homoloid Mill. 1.5 HP, 3450 RPM. Mounted on stand with wheels.

TYPE

HAMMER MILL

Manufacturer

FITZPATRICK

Model

J

Fluid Air Impact/Screening/Hammer Mill, Model 003

Item # MIL-41

***SOLD*** Used Fluid Air Impact/Screening/Hammer Mill, Model 003, Stainless Steel. Stainless steel fixed rotor with bars, 4" x 15" cutting chamber with bottom screen (current screen approx. 1/16" dia holes). Approx. 13" x 13" x 11" Deep Feed Hopper with 2" Screw driven by a 1 hp, 3/60/230/460 volt, 1745 rpm XP gear motor. Mill driven by a 5 hp, 3/60/575 volt, 3465 rpm, XP motor. Includes a control panel for feed rated and Mill. Mounted on a stainless steel base with casters. Last used in Pharmaceutical plant. Approx. 2' x 3'6" x 6' OAH.

TYPE

HAMMER MILL

Manufacturer

FLUIDAIR

Model

003

Fitzmill Comminutting model D6 Hammer Mill for sale

Item # MIL-37

***SOLD*** used Fitzmill Comminutting model D Hammer Mill. Has 15 HP, 230/240 volt motor. 11" Dia. opening. Last used in sanitary food industry.

TYPE

HAMMER MILL

Manufacturer

FITZPATRICK

Model

D6

RIETZ Disintegrators (Hammer Mills) Model RP-12-K-122

Item # MIL-30

***SOLD***Qty.(2) Each: Used RIETZ Disintegrators (Hammer Mills) Model RP-12-K-122. Units Mounted on a 45 Deg. angle. Unit A: RP-12-K-122, S/N RP-661794. Unit B: RP-12-K-122, S/N RP-732071. 60 HP Drives. Last used in Food Plant. Sanitary Construction.

TYPE

HAMMER MILL

Manufacturer

REITZ

Model

RP-12-K-122

Fitzpatrick DKAS012 FitzMill Stainless Steel Hammer Mill

Item # MIL-100

used Fitzpatrick DKAS012 FitzMill Stainless Steel Hammer Mill. S/N 10535. Driven by 15 HP, 230/460 volt, 1770, 11 KW drive. Has a 15" wide x 18" deep inlet hopper.

TYPE

HAMMER MILL

Manufacturer

Fitzpatrick

Model

DKASO12

Fitzpatrick Model J Stainless Steel Homoloid/Hammer Mill

Item # MIL-80

***SOLD*** used Fitzpatrick Model J Stainless Steel Homoloid/Hammer Mill. Sanitary construction. Mounted on Wheels. Digital Speed Readout (RPM). Variable Speed Control. Start And Stop Buttons Yaskawa F7 Varispeed VFD. 12" x 3" Stainless Steel Feed Pan. 6" Feed Throat. Discharge Aperture: 8" x 2.5". Discharge Height: 31". Flolo 3 HP AC Motor; 3600 RPM. Includes:(29) Various Screen Sizes. Last used in Pharmaceutical Plant.

TYPE

HAMMER MILL

Manufacturer

FITZPATRICK

Model

J

Fitzmill Model DSA06 Hammer/Knife mill for sale

Item # MIL-84

used Fitzpatrick Fitzmill Mdl. DSA06 Hammer/Knife mill. Stainless Steel. Driven by 7.5 HP, 230/460 volt, 1740 rpm Explosion proof motor. On cart with wheels.

TYPE

HAMMER MILL

Manufacturer

FITZPATRICK

Model

DSAO6

Hosokawa Alpine cryogenic milling 250 CW system

Item # MIL-86

Used Hosokawa Alpine cryogenic milling 250 CW system consisting of the following: Hosokawa Alpine model A250CW pin mill. Stainless steel construction. 8′ long X 5′ wide X 7′ high. 1200 rpm, 30 HP main drive. Skid-mounted blower system. 105 cubic foot feed 316 stainless steel hopper with 0.8 mirror finish. 1.4 HP, 42-104 rpm feed screw. Kemutec model K650 Rotary sifter, 3 HP motor drive, feeding to nitrogen cryogenic feed screw driven by 1.4 HP motor. Connecting Rotary valves, Stott drum filling and weigh station at discharge with Mettler Toledo PXHN1200 floor scale. Hosokawa pulse Jet dust collection system. Interconnecting piping. Spare mill chamber housing and blower.

TYPE

HAMMER MILL

Manufacturer

Hosokawa Alpine

Model

250CW

Fitzmill Comminutor Hammer Mill Model DKAS012 for sale

Item # MIL-89

***SOLD*** used Fitzpatrick Fitzmill Comminutor Hammer Mill, Model DKASO12, S/N 9887. Driven by 20 HP, 230/460, 1770 rpm motor. Last used in Sanitary Food Plant.

TYPE

HAMMER MILL

Manufacturer

FITZPATRICK

Model

DKASO12

Micron Powder Systems Bantam Samplmill for sale

Item # MIL-90

***SOLD*** Micron Powder Systems Bantam Samplmill S/N M207026J1, 14000 RPM. Hammer Mill. Unit has spare screens and rotor. (Hosokawa) Unit Last used in a Food Plant.

TYPE

HAMMER MILL

Manufacturer

MICRON POWDER SYSYTEM

Model

SAMPLMILL, BANTAM

used Fitzpatrick DKAS012 FitzMill for sale

Item # MIL-93

***SOLD*** used Fitzpatrick DKAS012 FitzMill 316 Stainless Steel. Vari-Speed Hammer Mill, Pan feed, 32 Stepped Impact Blades, Chamber Dimensions 13" x 11", Discharge Opening 17" x 13" with stainless steel frame and casters. 15 HP, 230/460 volt, 1765 rpm stainless steel motor. Last used in sanitary pharmaceutical plant. Spare set of blades available for additional cost (See item # MIL-95)

TYPE

HAMMER MILL

Manufacturer

FITZPATRICK

Model

DKASO12

IKA Microfine grinder. Model MF10

Item # MIL-98

used IKA Microfine grinder. Model MF10 BASIC S1. Electrical 115V, 50/60Hz, 1000W, 6500 RPM. Has housing with feeder, No grinding rotor.

TYPE

HAMMER MILL

Manufacturer

IKA

Model

MF-10 Basi S1

Fitzpatrick Fitzmill Blades/Hammers for sale

Item # MIL-95

Spare Fitzpatrick Fitzmill Blades/Hammers. DKS 225 Blades, 420, .370. HIT # 2247739. (2) Sets of Impact Blades. (64 Blades total). Were a spare set for a model DKAS012 Mill.

TYPE

HAMMER MILL

Manufacturer

FITZPATRICK

Model

Fitzmill Blades

Fluid Air Granumill Jr. with Screw Feeder for sale

Item # MIL-99

used Fluid Air Granumill Jr. with Screw Feeder. 120 Volt Single Phase. Last used in Sanitary Pharmaceutical plant.

TYPE

HAMMER MILL

Manufacturer

FLUID AIR

Model

Granumill Jr

IKA Dispax Reactor model DR3-6A. High shear inline dispersing machine

Item # MIL-47

used IKA Dispax Reactor model DR3-6A. High shear inline dispersing machine used for the production of very fine emulsions and suspensions. Driven by a 7.5 HP, 230/460 volt, 3520 rpm Explosion proof (XP) motor.

TYPE

HIGH SHEAR DISPERSER

Manufacturer

IKA

Model

DR3-6A

IKA Dispax Reactors model DR2000/5 Inline High Shear Mixing/Milling units for sale

Item # MIL-34

(3) IKA Dispax Reactors model DR2000/5 Inline High Shear Mixing/Milling units rated at 2500 l/h (660 GPH). Last used in toothpaste plant (Sanitary Application). The IKA DISPAX-REACTOR DR 2000 is a three-stage (3 sets of rotors) high shear inline dispersing machine used for the production of very fine emulsions and suspensions. Applications include: Neutralization & PH adjustment, Tooth paste, Salt solutions, Edible oil refining & degumming, Shampoos & Conditioners, Polymerizations, Pesticides, Herbicides, Reaction Enhancements, Microencapsulations, Viscosity Control, Creams, Lotions, Fuels.

TYPE

HIGH SHEAR DISPERSER

Manufacturer

IKA

Model

DR 2000/5

IKA Works Model MHD2000/20. Continuous In Line Mixing-Homogenizing-Milling-Dispersing system

Item # MIL-46

UNUSED IKA Works Model MHD2000/20. Continuous In Line Mixing-Homogenizing-Milling-Dispersing system for Powder/solids and Liquid (Inline Powder Inducting, Wetting and Dispersing, Inline mixer). Sanitary construction. This Model is rated at 30 GPM or 7,000 L/Hr. with Solids of 6,200 Lbs./Hr. 25 HP, 3600 RPM Motor. Solids Inlet 3"; Liquid Inlet 2"; Outlet is 2.5". Solids and liquids are instantaneously mixed and dispersed in one step, maintaining a dust free environment. The MHD accurately combines the solid and liquid, and disperses them into a homogeneous final product. Inline powder wettening and dispersing machine for continuous operation. Comes with dual intake and output system. Applications include: Vaccines, Colloidal solutions, Metal-oxide suspensions, Inks, Printing colors, Incorporation of pigments, Sub-micron emulsions, Greases, Lubricants, Graphite slurries. Drawing and data sheet available upon request.

TYPE

HIGH SHEAR DISPERSER

Manufacturer

IKA Works

Model

MHD 2000/20

GREERCO In Line 4" Pipeline High Shear Mixer model 4PLM

Item # MIL-68

***SOLD*** GREERCO In Line 4" Pipeline High Shear Mixer model 4PLM. Driven by 10 HP, 3500 RPM, 230/460 volt, Explosion Proof Motor. Has Square D box. Mounted on portable cart. Pipeline Mixers are designed for in-line continuous high-speed, high-shear homogenizing, mixing, emulsifying and rapid dispersing. Last used in personal care industry.

TYPE

HIGH SHEAR DISPERSER

Manufacturer

GREERCO

Model

4PLM

used Greerco Model 2SAN Sanitary Portable Pipeline Mixer

Item # MIL-94

***SOLD*** used Greerco Model 2SAN PLM 94 Sanitary Pipeline Mixer, High Shear in-line mixer. S/N 0376-3694; Reliance Electric Motor, 2 HP 208-230/460V 60Hz. 1" Inlet/Outlet. Mounted on portable cart with Reliance Electric Mdl. SP500 VS Drive.

TYPE

HIGH SHEAR DISPERSER

Manufacturer

GREERCO

Model

2SAN PLM 94

US Stoneware 10 gallon pivoting jar mill model 946

Item # MIL-70

Used US Stoneware 10 gallon pivoting jar mill model 946. Reeves varispeed drive 2 hp 3 phase 60 cycle 230/460 volt 1750 belt driven. Jar mill speed 56-28 rpm. Built 1995. SN PJ96101

TYPE

JAR MILL

Manufacturer

US STONEWARE

Model

946

Used US Stoneware roller jar mill for sale

Item # MIL-74

***SOLD***Used US Stoneware roller jar mill. 2 level mill. Rollers are approximatley 66" wide. (no jars). Includes motor and drip trays. SN CS94106.

TYPE

JAR MILL

Manufacturer

US STONEWARE

Model

Used Jet Mill

Item # MIL-8

Used Jet Mill. 36" Dia. with 2" Dia. ring. On wheels

TYPE

JET MILL

Manufacturer

Model

Used Jet Mill. 46" Dia

Item # MIL-9

Used Jet Mill. 46" Dia. with 3" Dia. Ring. Mounted on wheels.

TYPE

JET MILL

Manufacturer

Model

Sturtevant Micronizer Jet Mill for sale

Item # MIL-39

Used Sturtevant Micronizer Jet Mill. Model: 20" diameter. Stainless Steel contact parts. 12 nozzles. Rated capacity: 100 - 1000 lbs. per hour. Requires 550 SCFM of air/gas. Top cover is removable. Appears to be unused.

TYPE

JET MILL

Manufacturer

Sturtevant Inc.

Model

20"

APTM Superjet Micronizer Jet Mill. Model SM1-C3

Item # MIL-82

used APTM Superjet Micronizer Jet Mill. Model SM1-C3. Advanced Powder and Micronisation.

TYPE

JET MILL

Manufacturer

APTM

Model

SM1-C3

Used The Jet Pulverizer Co, Model 04-520

Item # MIL-97

Used The Jet Pulverizer Co, Model 04-520. 4in diameter Micron Master Jet Pulverizer. Stainless steel contacts lab mill. Equipped with Syntron Magnetic Feeder, Model F-TO. Steam required 125 lbs/hr, air required 50 SCFM, typical feed rate 2-50 lbs/hr.

TYPE

JET MILL

Manufacturer

The Jet Pulverizer Co

Model

04-520

Lump Breaker. Unit is mounted on Stainless Steel base with a feed pan

Item # MIL-51

used Lump Breaker. Unit is mounted on Stainless Steel base with a feed pan. Has (2) bars with "finger" type lump breakers. Opening to lump breaker is approx. 4" x 10". Has a "funnel": with 4" outlet. Has 1 HP 208-230/460 volt Drive into gear box. Looks custom built. From Food Plant.

TYPE

LUMP BREAKER

Manufacturer

Model

ASHIZAWA Vertical media / pearl / bead mill

Item # MIL-10

(1) ASHIZAWA Vertical media / pearl / bead mill. Agitator motor 11 kw, 480 v, Shaft speed 71 to 287 RPM. Capacity of grinding vessel 41.6 ltr. Minimum Bead size 0.3mm. Mechanical Seal. 316SS contact parts.

TYPE

MEDIA MILL

Manufacturer

ASHIZAWA

Model

SP50TEX-V

Premier model HML 1.5 Supermill Horizontal Media Mill

Item # MIL-48

***SOLD***Used Premier model HML 1.5 Supermill Horizontal Media Mill. 1.5 Liter capacity, Jacketed stainless steel chamber, rated 0-20 liters/hr output, driven by 5 HP, 3/60/460 volt motor, with 1/3 HP pump, mounted in self contained housing. Serial# HML1.5.92011.01.0257. Built 2001.

TYPE

MEDIA MILL

Manufacturer

PREMIER

Model

HML 1.5

MS-32 Fryma "Coball Mill", for ultra fine grinding of slurries

Item # MIL-42

Used MS-32 Fryma "Coball Mill", for ultra fine grinding of slurries of various viscosities. US Explosion proof design, built by Fryma AG 1993, S/N: M15890. Housing material: painted steel (white epoxy 1.4517). Coolable Grinding elements: Colmony coated Rotor, w/ 4.5 mm grinding gap; Stator/Wear plate: Stainless Steel (AISI-420). With mechanical seal, "min-max" pressure and temperature gauges, with internal working pressure of 2.5 bar (maximum). Unit Includes hydraulic bowl lifting device. Main drive: 30HP Reliance motor with US Ex-Proof machine mounted cabinet (460V-3PH-60HZ). Unit includes "Steimel" product feed pump (gear pump w/ mechanically variable speed control), model T1-60P, with 1/2 HP US ex-proof Reliance motor. O&M Manual included. Previous usage: Pharmaceutical Industry. (Note: Unit requires new hydraulic lifting cylinder)

TYPE

MEDIA MILL

Manufacturer

FRYMA

Model

MS-32

Fryma model MS-50 COBALL Mill for sale

Item # MIL-65

Fryma model MS-50 COBALL Mill. High performance annular gap bead mill for sub-micron milling. Capacity: 4 m3/hr. Capacity size 3 gal.(11.4 liter) Capacity range approx.: 150-1000kg/hr.. Product fineness approx.: 30 - <1um.

TYPE

MEDIA MILL

Manufacturer

FRYMA

Model

MS-50

Fryma model MS-50 COBALL Mill for sale

Item # MIL-66

Fryma model MS-50 COBALL Mill. High performance annular gap bead mill for sub-micron milling. Capacity: 4 m3/hr. Capacity size 3 gal.(11.4 liter) Capacity range approx.: 150-1000kg/hr.. Product fineness approx.: 30 - <1um.

TYPE

MEDIA MILL

Manufacturer

FRYMA

Model

MS-50

Netzsch horizontal media mill model 15-5 for sale

Item # MIL-69

Used Netzsch horizontal media mill model 15-5. 20 Hp main motor. 1.5 Hp Pump motor. Built 1980. Serial number. 001.

TYPE

MEDIA MILL

Manufacturer

NETZSCH

Model

15-5

Szegvari attritor type 01HDT

Item # MIL-72

Used Szegvari attritor type 01HDT. Size 01. SN 911002. (Requires shaft and media). Reeves varispeed drive 1/4 hp 3 phase 60 cycle 208-230 volt.

TYPE

MEDIA MILL

Manufacturer

Szegvari

Model

01HDT

DRAIS bead mill/media mill. Type ACS 800

Item # MIL-81

DRAIS bead mill/media mill. Type ACS 800, 300 HP, 460 Volt. Rated 60 PSI @ 194 degF internal and 60 PSI @ 104 degF on jacket. 72 Liter (19 gallon) vessel volume. MEGAVANTIS ACS 800. Buhler.

TYPE

MEDIA MILL

Manufacturer

DRAIS

Model

ACS800

FRYMA model PC4 media mill cleaner

Item # MIL-87

FRYMA model PC4. Cleans media for ball mills/media mills/ bead mills.

TYPE

MEDIA MILL

Manufacturer

FRYMA Maschinen AG

Model

PC 4

JH DAY 3 Roll Mill

Item # MIL-49

***SOLD*** used JH DAY 3 Roll Mill. 12" Dia. x 32" Chrome Plated Steel Chilled Rolls. S/N 89982. Last used in cosmetics plant.

TYPE

ROLL MILL

Manufacturer

JH DAY

Model

12x32 DAY ROLL

Used Ross 3 roll mill

Item # MIL-73

Used Ross 3 roll mill, carbon steel rolls approximately 12" X 30".

TYPE

ROLL MILL

Manufacturer

ROSS

Model

Ross 3 roll mill, chrome plated rolls

Item # MIL-76

Used Ross 3 roll mill, chrome plated rolls 4" X 8". Model 4X8. SN 29708. Manual adjustments.

TYPE

ROLL MILL

Manufacturer

ROSS

Model