Item # DRY-53
Used Great Lakes Air Products air dryer model GEH-125-236. Rated 125 SCFM @ 100 PSI. 3 phase 60 cycle 230 volt. SN 23336. Built 2001.
GREAT LAKES AIR PROD
Item # DRY-35
***SOLD***Used Gemco 10 Ft3 Double Cone Vacuum Dryer. 316L Stainless Steel. Rated 150 #/Cu.Ft.. Rated Full Vacuum @ 400 Deg.F. internal and 150 PSI @ 400 Deg.F. on Jacket. Jacket nozzle need repair.
Item # DRY-63
used Approx. 20 Cu.Ft. Komline Sanderson Double Cone Vacuum Dryer. Rated 15 PSI/FV @ 250 Deg.F. Internal . Rated 45 PSI @ 250 Deg.F. Jacket. NB# 64. Drive is 5 HP 208-220/440 volt, 1745 rpm XP Vari-Speed drive. Also has a bar drive (no bar available). (Tumble Dryer). Overall dimensions 161" lgth x 59" wide x 72" ht.
Item # DRY-25
***SOLD***Used Glatt 1560 liter (500 kg) Top Spray Fluid Bed Granulator, Model WSG-500. Original pneumatic controls upgraded to electrical with Allen Bradley PLC and Panelview 1400e HMI. Rear vented for explosion, spray wand with nozzle, inlet air plenum with prefilter, blower, HEPA, steam H/E, discharge bottom drop to Quadro Comil 196S (sold separately). Includes Buffalo 45-5 Type R 75 HP Blower.
Item # DRY-28
Used Glatt Laboratory Fluid Bed Dryer, Model TR2. 7-1/2" diameter x 8" deep Lexan bowl, temperature controllers, top mounted blower, driven by .37 KW (.50 HP), 3/60/110 Volt, 2440 RPM motor. Rated 20 - 80 degrees C (68 - 176 degrees F)
Item # DRY-42
***SOLD*** Glatt, Uni-Glatt lab size fluid bed dryer capable of drying, mixing and coating tablets, hard/soft gel capsules, metal beads & seeds as per the fluidized bed system from .5 to 3.0kg. System can dry conventional granules, powders & crystalline substances. Last used in Food Plant in sanitary application.
.5 to 3.0 KG
Item # DRY-55
Used Mendel Model FBP-1 Fluid Bed Processor/Dryer. Capacity 0.5 to 3 Kilos. Main features: Integrating mixing, spray drying, top spray granulation, bottom spray granulation, film coating and fluidized bed drying. Has Spray Granulator Insert. 240 volt, 3 Phase, 60 Hz, 7.5 KW. 4-6 Bar. Last used in Sanitary Pharmaceutical plant.
Item # DRY-62
***SOLD*** used Witte Fluid Bed Dryer. Stainless Steel. Approx. 20" wide X 6' Lgth. S/N 5746. Motor is 1 HP, 230/460 volt, 1725 rpm, 60 cyc, 3 ph. Includes cover, dust collector and air handling equipment which includes Buffalo size 15 Blower. Dust collector has approx. (63) 6' x 4.5" cages.
20" x 6'
Item # DRY-70
***SOLD*** used Glatt Mini-Glatt 3 Fluid Bed Dryer. Sanitary. Units used for Drying, Granulating, Agglomerating, Coating and bottom / top spray process. Batch size: 25 g - 375 g. Output: Cubic feet: 565 per hour. Air consumption: 6 bar. 16 cubic meter per hour at 6 bar air consumption. Stainless steel construction.
Item # DRY-74
used Witte Fluid Bed Dryer. Stainless Steel. Approx. 22" wide X 7' Lgth. S/N FP-1529. Unit has dust collector housing (no top manifold, cages, blower or heater). Motor is 1 HP, 230/460 volt, 1745 rpm, 60 cyc, 3 ph.
Item # DRY-73
used Fluid Air Laboratory Scale Fluid Bed Dryer, Model 2. 240 Volts, 1 Phase, with Accessories. S/N SN10219. Bowl Volume: 2L. Granulation Volume: 2L. Last used in sanitary food plant.
Item # DRY-21
***SOLD***Twin Screw Holoflite Dryer. (2) Each 24" dia. x 20 Lgth, 316L Stainless Steel Screws Rated 150 PSI @ 650 Deg.F.. Trough is 316LSS. Jacket is CS rated 30 PSI @ 650 Deg.F. Drive is 5 HP, 3/60/460V, 1800 RPM into a Falk gearbox ration 985.3:1. Output rpm of screws is approx. 0.355 to 1.42. Unit has a CS vapor dome.
Item # DRY-72
used Holoflight/Thermal Dryer/Cooker with Heated trough and shaft. 16" x 18' Lgth. Continuous Indirect Dryer Auger Paddle Conveyor. Built by Christian Therm-L-Veyor, Model 16PB18, S/N 76331. Rotor rated 100 PSI. Jacket rated 60 PSI. Shaft is 6.5" dia.. (22) "Paddles" 13" wide x 5" ht.. No motor. Last used in sanitary food plant in butter application. Rotor hydro-tested.
Item # DRY-76
used Twin Screw Holoflite Dryer, Each screw is 14" X 15', 316 Stainless Steel, 'Electric-Scru' ThermaFlite Dryer. Trough is also 316 Stainless Steel. Elements on rotors total 100KW. 4 zones around drying chamber, Elements 12.5KW ea. 150KW total. Rated to approx 1200 DegF. Inlet 16" x 12", Discharge 17" x 10". (2) 12" vapor outlets. Driven by 3 HP, 480V 1750 RPM, XP, V-belt to reducer 2:1. Sumitomo gear, 87:1 ratio. Screw rated 1-10 RPM.
Item # DRY-75
Quad Screw Holoflite Dryer/Cooler, (4) Each 24" dia. X 24' L 316 Stainless Steel screws rated 75 PSI @ -20/650 degF. THERMAFLITE Model# HSD 24-24-7 Style B 4-screw. 'Holo-Scru'. Oil Heated. Trough is 316SS. Jacket CS rated 50 PSI @ -20/650 DegF. Drive is 5 HP XP 1160RPM into Sumitomo gearbox, 649:1 ratio, Output RPM for screws is 0.9-2.7 RPM.
Item # DRY-33
187 Cu.Ft. (5300 Liter). JH Day Nauta Blender/ Nauta Dryer/ Conical Dryer. 316 Stainless Steel contact parts. Model# RB124. Nauta vacuum processor and dryer. Internal rated Full Vacuum. Jacket rated for 125 PSI @ 353. 1400 Gallon.
NAUTA / CONICAL
Item # DRY-58
35 Nauta Vacuum Dryer/Mixer MT. Model MT 1/200. Serial # 7098. National Board # 21424. Constructed of 316L stainless steel. Interior has polished surface. Conical vessel has a capacity of 49.43 cuft with working volume of 35.3 cuft (1,000 Liter) Dryer uses an 8" diameter inclined orbiting screw, driven by a 10 hp drive to gently agitate product while drying. Can dry particles up to 5 mm in size. Vessel is rated for Full Vacuum/150 psi @ 450 f on jacket and internal. Acutal drying temperature maximum is 302 f. The top has an 18" manway with 6" sight glass, 18" flanged fitting, 4" sight glass, (2) 3" flanged fittings, (2) 2" flanged fittings, 6" flanged fittings and (2) 1" threaded fitting for the top jacket. The side has (2) 2" flanged fittings for the body jacket. The bottom has a 10" flanged discharge fitting with pneumatically operated flush mount valve and (2) 1" threaded fittings for bottom jacket
NAUTA / CONICAL
Item # DRY-69
***SOLD*** used Conical Screw Nauta Vacuum Dryer, Portable 73 liter 316L Stainless Steel Bolz Summix with Filter. Pilot Plant size, 15 Liter working capacity. Mdl. Lab Dryer ML001-Unit. Built 2005. S/N: WK317670. Internal Rated -1/1 bar at 0 to 110 degree C.; Jacket rated -1/6 bar at 0 to 110 degrees C.. Bottom ball valve discharge, and side flush sample valve. Mixer mounted in a SS stand on wheels with starter and power cord. Includes Bolz 5l jacketed filter. Last used in sanitary application.
NAUTA / CONICAL
Item # DRY-13
Despatch Model CRC2-20-2E Pass Trough Clean Room Sterilizer/Oven, 500 deg.F (260 Deg.C), Inside dimensions are 37"W x 27"D x 37"H. Forced exhaust system, stainless steel interior, horizontal airflow, forced exhaust, polished SS exterior, interlocked doors. Heater capacity 12KW, heater amps 14.4, Total amp 20.2. Control 120v-1ph-60Hz. Line Voltage 480v-3ph-60Hz. Last use Used for Depyrogenation of glassware. Overall dimensions 6'9" w x 4' d x 7'6" OAH.
Item # DRY-27
Precision Drying Oven. Model 12-500M. Voltage 230-3-60. Full load Amps 21.0. Inside dimensions are 20" x 20" x 20". (5) Shelves. (3) trays available. Oven designed for ventilating 0.46 Gal. of Solvent in 1 Hour.
Item # DRY-60
***SOLD*** Used Lindberg brick lined Furnace model 51663. Chamber dimensions 12" X 12" X 14" deep. Outer dimensions 37" X 36" X 33". Max temp 1500 Deg.C. 50/60 Hz. 23000W. 240 volt. SN 959721-2 with controller model 58175-P-B. SN959722-1.
Item # DRY-40
***SOLD***used Strong Scott Solidaire Paddle Dryer. 2' x 19' lgth. Model SJS24-112. Stainless steel shell and paddles. Carbon steel jacket. Driven by 15 HP. 230/460 volt, 870 rpm motor. Belt Drive with (1) 6" dia. pulley on motor and 20" dia. pulley on dryer. Approx. 22' OAL.
2' x 19'
Item # DRY-68
***SOLD*** used Continuous Jacketed Paddle Mixer/Blender/Dryer/Conveyor. Trough is 20" wide x 22" deep x 12' Lgth. Trough is jacketed and shaft for paddles can be heated/cooled. Drive is 1.5 HP, 208-230/460 volt, 1725 rpm into gear reducer with 45.91:1 ratio. Discharge is approx. 17" x 7". Unit has ability to incline and be portable on wheels. Stainless Steel Construction. has 3" Drain. Approx. 20 CU.FT. working capacity. Last used in food plant in a sanitary application.
Item # DRY-65
Used FMC Link-Belt Roto-Louvre dryer tube approximately 66" diameter X 348" long with spiral flights. Approximately 10" diameter end inlet feed tube, end discharge hood with a Semco rotary valve, model CV-04A. Driven by a 1 HP 3/60/230/460 volt, 1700 rpm gear motor with a ratio of 52.69 to 1. Dryer sits on 6" wide X 20" diameter trunnions. Chain driven by a 7.5 HP 3/60/208-230/460 volt, 1760 rpm motor through a reducer with a ratio of 38.4 to 1. Mounted on a frame. Includes steam chest and blower.
5'6" x 29'
Item # DRY-57
***SOLD***used Niro Spray Dryer Model V, with a centrifugal atomizer and mixed flow two fluid nozzle atomizer. Single or two point product discharge. Equiped with a FU11-DA spray wheel atomizer and spray nozzle that may be installed to spray up from the cone. Counter/CoCurrent (Mixed Flow) Drying. Stainless steel chamber and contact parts, painted carbon steel insulation cover. The chamber is 47" inisde diameter, 31" straight side height with 30" height cone. Electronic variable speed controls, blower, cyclone, feed tank and interconnecting pipe are included as well. This unit was used in a product development lab/pilot plant.
Item # DRY-32
***SOLD***1 cu.ft. Patterson Kelley Twin Shell Vacuum Dryer/ Blender, Vacuum Tumble Dryer. 1 Cu. Ft. working capacity, stainless steel construction, Jacketed, rated Full Vacuum internal, Rated 500 #/Cu.Ft. max density, on stands with covers and valve.
The Patterson-Kelley Co., Inc.
Item # DRY-38
***SOLD*** Used Sweco PharmASep Vibro-Energy Filter Dryer, Model PH46Y30, 316L Stainless Steel. Sanitary design rated 0-2 bar (0-30 psi), vacuum -1 bar (-15 psi). Batch processing capacity solids up to 25kg (55 pounds). Above 30" diameter scalping screen capacity 11.01 gallons (1.47 cubic feet), between scalping & 46" diameter product screen capacity 31.3 gallon (4.18 cubic feet), capacity below 46" diameter product screen 38.5 gallon (5.19 cubic feet). Screens not included. Driven by a 2.5hp motor. Includes a 300 Liter vessel Certified by Pure-Flo Precision, serial# 240356, built 2004. Internal rated 30psi, vacuum rating -1 bar, control panel, and a Watson Marlow pump, model 624U. Mounted on frame. Sweco serial# 601748.
Item # DRY-39
Used- Sweco PharmASep Vibro-Energy Filter Dryer, Model PH46Y30, 316L Stainless Steel. Sanitary design rated 0-2 bar (0-30 psi), vacuum -1 bar (-15 psi). Batch processing capacity solids up to 25kg (55 pounds). Above 30" diameter scalping screen capacity 11.01 gallons (1.47 cubic feet), between scalping & 46" diameter product screen capacity 31.3 gallon (4.18 cubic feet), capacity below 46" diameter product screen 38.5 gallon (5.19 cubic feet). Screens not included. Driven by a 2.5hp motor. Includes a 300 Liter vessel Certified by Pure-Flo Precision, serial# 240360, built 2004. Internal rated 30psi, vacuum rating -1 bar, control panel, and a Watson Marlow pump, model 624U. Mounted on frame. Sweco serial# 601754.
Item # DRY-50
Unused Bethlehem Co. "Porcupine" Stainless Steel Vacuum Dryer, Model 1P1810JTB. Has 316L Stainless Steel 18" dia. x 10' L single agitator shaft rated 50 PSI @ 260 degF. 304 Stainless Steel trough rated full vacuum @ 260 degF. Carbon steel jacket rated 50 PSI @ 260 degF. Center bottom discharge outlet with 6" stainless steel manually operated ball valve. Driven by a 15 HP, 230/460V, 1760 RPM, explosion proof (XP UL) motor. 36 tooth sprocket. Drive sprocket is 12 tooth on 31.42:1 ratio reducer.
Item # DRY-71
***SOLD*** used 70 Cu.Ft. Jacketed Vacuum Dryer, Ribbon Blender, built by Expert Ind. Hastelloy C276. Internal rated Full Vacuum @300 Deg.F. 304SS Jacket rated 70 PSI @ 300 Deg.F. Trough is 95" lgth. x 38" wide x 42" Ht. Has Dome Cover. 12" CBO. Requires a 15 HP Drive(details in drawing).