Blenders / Mixers
Item # BM-343
Clamp-on Lightnin Mixer model ND-1, 1/3 HP, 220/440 volt, 1725 RPM into gear reducer. Explosion Proof (XP). 316 Stainless Steel shaft and blades. 44" L x 1/2" dia. shaft with (2) prop type blades that are approx. 9" diameter. Previously mounted on tank that was 3'3" dia. x 3'9" T/T.
Item # BM-287
(2) Each Bridge mounted Hamilton 2 HP Sweep mixer with scraper blades and 2 HP Tree Agitation for 350 gallon Kettle. New motors included.
Item # BM-208
Agitator, Flange Mount, Mfr. Veenstra B.V. De Holwert 10, Type FRA-150, Holland, Mach # 98.096, 277/480 volt, 1.1 KW (1.5 HP). Stainless Shaft, 36" lgth. x 1.25" dia. with 8" mixing blade.
Item # BM-277
Used clamp-on stainless steel mixer/variable speed agitator with digital readout. Driven by 1/2 HP, 1725 RPM, 115 Volt, single phase motor. Has a 30" lgth. shaft with collapsible agitator blades (approx. 8" in diameter when open) for easy installation inside a port. Sold As Is.
Item # BM-347
used 75 HP Philadelphia Gear box for Mixer. Size/Type 3809S. Order # 22220. Input rpm 1750, output 230 rpm. 7.6:1 ratio. S/N 98DID0229-1.
Item # BM-410
used Lab Mixer on stand with variable speed explosion proof (UL, XP) controller. Stand has base for 11.5" diameter (standard 5 gallon bucket). Dayton 1/6 HP, 90 V, 1800 RPM drive motor. Stainless steel agitator shaft 1/2" dia x 12" L with 3" dia blades. Stand mount is 30" H. Video of unit running available.
Item # BM-484
1.5 HP Lightnin Agitator/Mixer model XLO-100D. Motor is 1.5 HP, 1725 RPM, 208-220/440 volt. Shaft is Stainless Steel 2" dia. x 44" Length with 2 sets of turbine props. one is approx. 26" dia. and one is approx. 20". Unit mounted on Stainless Steel bridge that measures 59.25" length x 16" wide. Last used on a 350 Gallon kettle. No Kettle included. Lightnin Mixer.
Item # BM-468
***SOLD*** Qty(2) Bolt on, Philadelphia Mixer/Agitator. Model MT-03PTO, 5 HP, 1160 RPM in/ 45 RPM out
Item # BM-517
(2) Side entering Mixmor Mixers Model HV-2. 2 HP, 208-230/460 volt, 1755 rpm motors. 10" Diameter Carbon steel Flanges. Shafts are approx. 2' lgth. with 16" Dia. Props. Units appear unused.
Item # BM-433
used 1.5 HP Lightnin Mixer/Agitator Model X6Q150. 208-230/460 volt. Has bracket to mount on angle or remove to mount vertical. No shaft available.
Item # BM-434
used 1 HP Mixer/Agitator with Stainless Steel Shaft. 230/460 volt, 1725 RPM. Bridge mount (4' L x 1' W) or remove and mount on flange. Stainless Steel Shaft is 3/4" diameter x 4'L with (2) prop type blades approx 11" diameter.
Item # BM-355
Used Approx. 25 gallon capacity Myers Double Motion change can mixer model 550A-5-5-1475. Stainless steel contacts. Can is stainless steel and approximately 20" diameter X 20" deep, open top with dished bottom and center bottom outlet, on castors. 3 Wing anchor agitator, 5 hp 3 phase 60 cycle 230/460 volt 1740 rpm. High speed prop agitator, 5 hp 3 phase 60 cycle 230/460 volt. Hydraulic lift. Built 2001.
Item # BM-511
3 HP Silverson High Shear Mixer/Homogenizer/Agitator model DX with 27" lgth shaft. Motor is 3 HP, 230/460 volt, 3500 RPM motor. Has Allen Bradley PowerFlex 70 Speed Controller and Silverson Mobile Hydraulic Model D Floor Stand. Appears in excellent condition. Last used in a sanitary pharmaceutical plant. Video of unit running available.
Item # BM-389
***SOLD*** used 500 Gallon APV Crepaco Likwifier/ Liquifier/Liquefier. Triple motion. Has (1) top mounted Mixer with scraper/sweep blades agitator and also (1) shaft with (2) sets of pitched blade props (sweep is 7.5 HP, 1735 RPMi/10 RPMo; Shaft with props is 7.5 HP, 1735 RPMi/85 RPMo). Bottom mounted high shear mixer driven by 25 HP, 1170 RPM, 230/460 V. Jacket rated 90 PSI @ 350/-20 Deg.F. 5' dia x 3' T/T (5' from top of dish to bottom of cone). 13'6" Overall Height. Sanitary construction.
Item # BM-299
***SOLD*** Ross VMC-2 Triple Shaft (tri-shaft) Versamixer Mixer. 316 Stainless Steel construction. Vacuum capable. 2 gallon jacketed Vacuum capable mixing can with provision for thermal couple probe (Type J). 50 PSI jacket. Sanitary 80 grit finish. Explosion proof drives and controls. Anchor agitator driven by 1HP, 230/460 volt xp motor (2) high speed dispersers each driven by 1 HP, 230/460 volt motor. Air over bowl lift/lower mechanism. Lift System: 80-100psig/ 4-5 scfm. Electrical 115V/60Hz. Included are the the unit and electrical mounted on the unit. No main control panel included. Serial# 104930. High viscosity mixer.
Item # BM-209
2400 Liter working capacity Fryma model VME 2400 vacuum mixer (~650 gallon), triple shaft, tri-shaft mixer. Fabrication # M10510. The tank has an overall height is 101" to top of lid including legs. It is 87" to the top with the lid removed. The overall diameter of tank with jacket is 63". The interior dimensions are 61" diameter with 54" straight side height, 11" dome top and 11" dish bottom. Working temperatures are 150 c for the interior and the jacket. The interior has a pressure rating of -1/+1 bar and the jacket has a 2.5 bar rating. There are two agitator drives, a 7.5 hp motor drives a center 3 prop agitator and a scrape agitator through a chain drive and a 50 hp motor drives a disperser type agitator off to the side of the center shaft. The top has an 8" flanged opening that is clamped shut and 6" glass inspection port with light. Top also has a 2" sanitary, 1.5" sanitary, and (2) 1" threaded fitting. The bottom has a 6" sanitary discharge with a pneumatically operated valve. Requires 230/ 460 vac 3 phase electrical supply. Previously used for toothpaste. Good Condition.
Item # BM-108
***SOLD***Used Fryma VME-120 Vacuum Processing Vessel, Sanitary construction, 200 liter (52.8 gallon) total, 50-120 liter (13-32 Gallon) working capacity, tri-shaft mixer, rated FV Internal,SS jacket rated 3 BAR, with 3 shaft (Tri-shaft) mixing: Consisting of(1)- anchor/sweep agitator w/scrapers driven by .75 KW motor, (1)- High speed agitator with dissolver/disperser blade has 4KW motor, (1) toothed colloid mill has 4KW motor. Vacuum Pump is: SIHI Model- LPHR-25007-ABAHF0A0. Direct driven by 2.2 KW, 3/60/220 Volt, 3400 RPM. Has bottom outlet. High viscosity mixer.
Item # BM-348
***SOLD*** used 2400 liter Fryma VME-2400 Vacuum Processing Vessel/Kettle, Dual Shaft, Sanitary construction, 2400 Liter (630 Gallon) working capacity. There are two agitator drives. A 7.5 hp motor drives a center 3 blade counter rotating agitator and a scrape agitator through a chain drive. A 50 hp motor drives a disperser type agitator off to the side of the center shaft. Working temperatures are 150 Deg.C (302 Deg.F.)for the interior and the jacket. The interior has a pressure rating of -1/+1 bar and the jacket has a 2.5 bar rating. The top has an 8" flanged opening that can be used for a colloid mill (not included) currently it is clamped shut and 6" glass inspection port with light. Top also has a 2" sanitary, 1.5" sanitary and (2) 1" threaded fitting. The bottom has a 6" sanitary discharge with a pneumatically operated valve. Requires 230/460 vac 3 ph electrical supply. Previously used for toothpaste. Tri-Shaft
Item # BM-350
***SOLD*** Used Ross Model PVM300 Triple Motion Stainless Steel Mixer. Mixing capacity 150 to 300 gallon. Full capacity 398 gallon. Stainless steel jacketed change can 15 psi. Vacuum mixer. Triple mixers including (1) three wing anchor agitator with scrapers on side and bottom of can. (1) High Speed disperser. (1) High shear rotor stator mixer (requires head and cage). Mixer motors (1) 15 Hp and (2) 30 Hp 3 phase 60 cycle 230/460 volt 1765 rpm. Change can is jacketed and on castors. Hydraulic lift.