Heat Exchangers
Sub-Categories
Xchanger Inc. heat exchanger used to heat and cool low pressure gas streams
Item # EX-414
Xchanger Inc. heat exchanger used to heat and cool low pressure gas streams. Model C-100-2. Typical pressure 15 PSI (1 Bar). Air In 2", Air Out 2". Tube inlet 3/4", Outlet 1.5". Used to heat/cool/dehumidify by using Water/Refigerant/Steam/ect.
0
AIR/GAS
used Terlet Terlotherm Model T0 Scraped Surface Heat Exchanger for sale
Item # EX-476
***SOLD*** used Terlet Terlotherm Model T0 Scraped Surface Heat Exchanger, wiped film. 32 Liter capacity. Jacket rated 3.5 Bar @ 150 Deg.C. 316L Stainless steel. Has wheels to make portable. Jacket pressure tested and Video of unit running available.
0
SCRAPED SURFACE
316L STAINLESS STEEL
FELDMEIER Tube in Tube Heat Exchanger/pasteurizer.
Item # EX-431
***SOLD*** Used FELDMEIER Tube in Tube Heat Exchanger/pasteurizer. Stainless Steel Sanitary construction. Approx. 300 Sq.Ft.. Qty (40) Each: 2" diameter x 19'6" L tubes tri-clover fittings. Overall dimensions 22'L X 5'6" W X 4'H. Last used in food plant.
0
SHELL AND TUBE
STAINLESS STEEL
FranRica 14-Pass Dimpled Tube in Tube Heat Exchanger/Pasteurizer for sale
Item # EX-479
***SOLD*** FranRica 14-Pass Dimpled Tube in Tube Heat Exchanger/Pasteurizer. Has 2" ID and 4" OD x 19'10" Lgth tubes. Sanitary Construction. Model # OES01-CX-01. Dimple tube design provides enhanced heating, cooling and drainage advantages. Overall Dims.: Aprox. 250" L x 48" W x 72" H
0
SHELL AND TUBE
STAINLESS STEEL
UNUSED. Spiral tube
Item # EX-227
UNUSED. Spiral tube. ~ 2 sq. ft. 10" dia x 2' L
2
SPIRAL
3 Sq.Ft. Allegheny Bradford Stainless Steel Shell and Tube Heat Exchanger. Vacuum Rated Sanitary
Item # EX-470
used 3 Sq.Ft. Allegheny Bradford Stainless Steel Shell and Tube Heat Exchanger. Vacuum Rated Sanitary Construction. 316 SS Tubes rated 150/FV @ 350 Deg.F. (-20). 304 SS Shell rated 150/FV @ 350 Deg.F. (-20). NB #. Shell is insulated 7" OD. 5" Shell x 26" Lgth. Shell has 2-1" Flanges. Tubes are approx 1/2" OD have 2-1.5" Triclover fittings.
3
SHELL AND TUBE
316L STAINLESS STEEL
3 Sq.Ft. ITT Standard Stainless Steel Shell and Tube Heat Exchanger
Item # EX-471
used 3 Sq.Ft. ITT Standard Stainless Steel Shell and Tube Heat Exchanger. Sanitary Construction. 316 SS Tubes rated 150 @ 367 Deg.F. (-20). SS Shell rated 150 @ 367 Deg.F. (-20). NB # 57478. Shell is 8" OD. x 24" Lgth. Shell has 2-1"; 1-2" Flanges. Tubes are approx 3/4" OD have 2-2.5" Triclover fittings.
3
SHELL AND TUBE
316L STAINLESS STEEL
Allegheny Bradford Shell and Tube Heat Exchanger for sale
Item # EX-492
UNUSED Approx 8 Sq.Ft. Allegheny Bradford Shell and Tube Heat Exchanger. Shell/Tubes rated 150/FV PSI @ 350 Deg.F.. Approx. 46" Long x 5" Dia. (18) 1/2" OD Tubes. Built 2014 (Unused). SN# 039440-111.
8
SHELL AND TUBE
STAINLESS STEEL
Cherry Burrell Scraped Surface Heat Exchangers/Votator/Contherm.
Item # EX-444
(2) used Cherry Burrell Scraped Surface Heat Exchangers/Votator/Contherm. 9 Sq.Ft. Horizontal 6" X 72", 15 HP. Units mounted on one Stainless Steel frame. Jacket Rated 150 PSI @ 375 Deg.F. MDMT -20 @ 150 PSI. Shell rated 400 PSI @ 375 Deg.F. Min -20 @ 400 PSI. Driven by 15 HP, 230/460volt, 1750 rpm motor. Last used in food plant in sanitary application. Jackets Leak. Units sold individually.
9
SCRAPED SURFACE
9 Sq Ft Waukesha-Cherry Burrell (SPX) Votator II. 6x72 Scraped Surface Heat Exchanger for sale
Item # EX-483
***SOLD*** Used 9 Sq.Ft. Waukesha-Cherry Burrell Votator II. 6x72 Scraped Surface Heat Exchanger. Stainless Steel Shell rated 600 PSI @ 400 Deg.F. Jacket rated 150 PSI @ 400 Deg.F. Was mounted Vertical. (an SPX brand) Last used in a sanitary food plant.
9
SHELL AND TUBE
STAINLESS STEEL
12 Sq.ft. Stainless Steel Shell & Tube heat exchanger
Item # EX-349
Qty. (4) Each: 12 Sq.ft. Stainless Steel Shell & Tube heat exchanger. Shell is 6" diameter. Has (4) U-tubes (8 holes), 1" OD x 6' L. Carbon Steel head. Unit with NB# 6912, shell re-rated to 100/FV @ 450 degF. Previously used as after condenser.
12
SHELL AND TUBE
Stainless Steel (SS)
15 Sq.Ft. HELITHERM steam to water heat exchanger
Item # EX-298
Qty. (3) each: 15 Sq.Ft. HELITHERM steam to water heat exchanger. Steam is primary or tube side fluid and Water is secondary or shell side fluid. Shell is 10.5" dia x 34.75" L. Has 3 coils.
15
SHELL AND TUBE
SB62 bronze (copper)
18 Sq.Ft. Shell and Tube heat exchanger
Item # EX-152
used 18 Sq.Ft. Shell and Tube heat exchanger. (5) U tubes 3/4 OD x 113 x 14 BWG. Type BEU
18
SHELL AND TUBE
304L SS
18 Sq.Ft. APV Plate Exchanger
Item # EX-230
18 Sq.Ft. APV Plate Exchanger. 2" inlet/outlet
18
PLATE
SS
20 Sq.Ft. Sanitary Shell and Tube Heat Exchanger
Item # EX-472
***SOLD*** used Approx. 20 Sq.Ft. Sanitary Shell and Tube Heat Exchanger. Allegheny Bradford. Shell and Tubes rated 150 PSI @ 350 Deg.F. Shell is 6" Dia. X 5'6" OAL. Shell has 1" and 2" Flanges. 1.5" Triclamp inlet and outlet on tube side. Approx 1/2" Tubes.
20
SHELL AND TUBE
STAINLESS STEEL
Yula Shell and Tube Heat Exchanger. All Stainless Steel Model CV-4A-72AS for sale
Item # EX-491
UNUSED Approx 20 Sq.Ft. Yula Shell and Tube Heat Exchanger. All Stainless Steel. Model CV-4A-72AS. Approx. 9'3" x 6". Both sides rated 150/FV PSI @ 300 Deg.F.. (20) 5/8" OD tubes. Built 2019. Unused in crate. SN# 23048
20
SHELL AND TUBE
316L STAINLESS STEEL
UNUSED approx. 25 Sq Ft Carbon Steel Heat Exchanger
Item # EX-438
UNUSED approx. 25 Sq Ft Carbon Steel Heat Exchanger. Shell Rated 250 PSI @ 212 deg F; Tubes rated 250 PSI @ 212 deg F. Shell: 7" OD x 60" L (77" OAL) (24) 3/4" dia Straight tubes. Nozzles: (4) 2". Built by Weldon, 1985, S/N: 3366, NB# 3791.
25
SHELL AND TUBE
CARBON STEEL
UNUSED 35 Sq.Ft. Stainless Steel Shell and Tube Heat Exchanger for sale
Item # EX-489
UNUSED 35 Sq.Ft. Stainless Steel Shell and Tube Heat Exchanger built by Enerquip. Rated 50 PSI/Full Vacuum @ 500 Deg.F on Shell and Tubes. 8" dia. x 5'9" Shell. (36) 0.625" OD x 5'9" lgth Tubes. NB# 19475. S/N 21811. Built 2017.
35
SHELL AND TUBE
Stainless Steel
35 sqft. high pressure vertical heat exchanger
Item # EX-454
***SOLD*** used approx. 35 sqft. high pressure vertical heat exchanger. Stainless steel tubes rated 1000 PSI @ 400/32 degF. Shell rated 150 PSI @ 350/32 degF. (Sq.ft is estimate only based on (80) tubes at 0.5" OD x 41" L).
35
SHELL AND TUBE
Stainless Steel
37 Sq.Ft. Allegheny Bradford Stainless Steel Shell and Tube Heat Exchanger.
Item # EX-469
***SOLD*** used 37 Sq.Ft. Allegheny Bradford Stainless Steel Shell and Tube Heat Exchanger. Vacuum Rated Sanitary Construction. 316 SS Tubes rated 150/FV @ 350 Deg.F. (-20). 304 SS Shell rated 150/FV @ 350 Deg.F. (-20). NB # 4637. Shell is insulated 8" OD. 6" Shell x 6'6" Lgth. Shell has 2-3" Flanges. Tubes are approx 1/2" OD have 2-2" Triclover fittings.
37
SHELL AND TUBE
316L STAINLESS STEEL
38.3 Sq. Ft. Rubicon Shell and Tube Heat Exchanger for sale
Item # EX-482
Unused 38.3 Sq. Ft. Rubicon Shell and Tube Heat Exchanger. CS Shell rated 125 PSI @ 300 Deg.F. 304L Tubes rated 655 PSI @ 300 Deg.F. Dimensions 6"Dia x 144"L. Serial #4136. National Board #2887. Built 2015.
38
SHELL AND TUBE
STAINLESS STEEL
Enerquip Inc. Stainless Steel Shell and Tube Heat Exchanger, sanitary construction for sale
Item # EX-493
used 40 Sq.Ft. Enerquip Inc. Stainless Steel Shell and Tube Heat Exchanger, sanitary construction. Shell and Tubes rated 150 PSI @ 375/-20 Deg.F.. Sq.Ft. is approximate. Has (22) 3/4" OD x 9' lgth tubes. Tube Inlet/Outlet 1.5" Triclamp. Shell Inlet/Outlet 2" NPT. approx 7" dia. x 9'6" OAL. S/N 2990. NB # 1864
40
SHELL AND TUBE
STAINLESS STEEL
47 ft2 (4.4 M2) Terlet Terlotherm Model T2-6
Item # EX-442
***SOLD***used 47 ft2 (4.4 M2) Terlet Terlotherm Model T2-6 Scraped Surface Heat Exchanger, wiped film. 316L Stainless steel shell rated 145 PSI. 304 SS Jacket rated 87 psi. Product volume 34 gallon (130 Liter). Unit equipped with 6 wiper arms with 48 blades. Driven by 22 Kw (30 HP, 230/460/60/3, 78 RPM output motor. The machines have the latest updates on sanitary hygienic design including USDA Dairy guidelines. Applications include: Heating, aseptic cooling, deep cooling, crystallization, tempering, sterilization, pasteurization, polymerization, gelling, setting starch mixtures, coulli preparation. Last used for cooling sauces in food plant (sanitary). Can also be used for heating.
47
SCRAPED SURFACE
316L STAINLESS STEEL
50 Sq.Ft. Shell and Tube Heat exchanger
Item # EX-186
used 50 Sq.Ft. Shell and Tube Heat exchanger. 6" diameter x 12' long. Fixed tube. Square footage estimated. BEM
50
SHELL AND TUBE
60 Sq.Ft. GLASS Shell and Tube Heat exchanger for sale
Item # EX-228
60 Sq.Ft. GLASS Shell and Tube Heat exchanger 31 tubes @ 10'6 L x 0 .5 dia. OAL = 10'6, Shell dia = 6".
60
SHELL AND TUBE
GLASS
65 Sq.Ft., 316-SS plate heat exchanger
Item # EX-432
Used 65 Sq.Ft., 316-SS plate heat exchanger. MFD by Tranter type UX-216-UJ-20, Serial # P23160H. Rated 150/150 psi @ 300 deg. F. Each end plate has 3-2" nozzles. Mounted on frame.
65
PLATE
316 STAINLESS STEEL
100 Sq.Ft. Shell and Tube Heat Exchanger Built by Atlas 316L Stainless Steel fro sale
Item # EX-486
used 115 Sq.Ft. Shell and Tube Heat Exchanger. Built by Atlas. 316L Stainless Steel shell rated 150/FV @ 500 Deg.F.. 316L Stainless Steel Tubes rated 150/FV @ 500 Deg.F. 16" Dia. shell x 4' lgth tubes. 7' OAL.
115
SHELL AND TUBE
316L STAINLESS STEEL
125 Sq.Ft. Sanitary construction Shell and U Tube Heat Exchanger
Item # EX-358
***SOLD*** Approx. 125 Sq.Ft. Sanitary construction Shell and U Tube Heat Exchanger. Approx. 9" Dia. x 9' Lgth. Shell openings:2-4"; 2-1" NPT. Unit has (108) 5/16"ID Tubes.
125
SHELL AND TUBE
SS
125 Sq.Ft. Shell and Tube Heat Exchanger for sale
Item # EX-490
used 125 Sq.Ft. Shell and Tube Heat Exchanger. (75) 3/4" OD x 8'6" Lgth Stainless Steel Tubes rated 150 PSI @ 350 Deg.F.. Carbon Steel Shell Rated 150 PSI @ 350 Deg.F.. Shell as 2" Inlet/outlet. No heads. Built by IFD Tube and Coil
125
SHELL AND TUBE
STAINLESS STEEL
150 Sq.Ft. Used Paul Mueller Plate Heat exchanger
Item # EX-388
Approx. 150 Sq.Ft. Used Paul Mueller Plate Heat exchanger. model AT161B-10. (23) 18" w x 54" plates. Part No. 9814361
150
PLATE
Stainless Steel
150 Sq.Ft. ITT Standard Shell and Tube Heat Exchanger for sale
Item # EX-478
***SOLD*** UNUSED 150 Sq.Ft. ITT Standard Shell and Tube Heat Exchanger. Stainless Steel Tubes rated 150 PSI @ 300 (-20) Deg.F. Approx (120) 1/2" ID x 10' lgth.. Shell is 10" Dia. Carbon Steel rated 150 PSI @ 300 (-20)Deg.F. Approx 12'6" OAL. Connections are 6". National Board # 223675
150
SHELL AND TUBE
STAINLESS STEEL
Bayonet Heater/Tank heater
Item # EX-367
Qty. 1 Each: Bayonet Heater/Tank heater. Area 175 sq. ft. Operating condition 150 psig - 500 degF. Has (9) 1" OD X 5' long U tubes. Shell diameter 10" X 5' long (from flange to end of bundle), 2'6" from flange to inlet flange. Flange for tank connection 15-18 diameter. Grease inlet is 6" diameter.
175
SHELL AND TUBE
CS
175 Sq.Ft. Allegheny Bradford Stainless Steel Shell and Tube Heat Exchanger
Item # EX-468
***SOLD*** used 175 Sq.Ft. Allegheny Bradford Stainless Steel Shell and Tube Heat Exchanger. Vacuum Rated Sanitary Construction. 316 SS Tubes rated 150/FV @ 350 Deg.F. (-20). 304 SS Shell rated 150/FV @ 350 Deg.F. (-20). NB # 4137. Shell is insulated 12" OD. 10" Shell x 9'8" Lgth. Shell has 2-4" Flanges. Tubes are approx 1/2" OD have 2-2.5" Triclover fittings.
175
SHELL AND TUBE
316L STAINLESS STEEL
220 Sq.Ft. ALFA LAVAL Plate Heat Exchanger/Pasteurizer
Item # EX-458
used 220 Sq.Ft. ALFA LAVAL Plate Heat Exchanger/Pasteurizer. Type H7-RC. Unit has (44) 48" x 15.5" Plates is 3 Zones. Zone 1 has (10) Plates; Zones 2 and 3 have (17) plates each for approx 220 Sq.Ft total area. Unit rated 10 Bar (145 PSI) @ 285 Deg.F. End plates have 3" tri-clamp connections and (2) spacer plates have 2.5" tri-clamp connections. Overall dimensions 7' ht. x 5'2" deep x 2'6" wide. Mfr. # 30100-7021. Last used in food plant in sanitary application.
220
PLATE
Stainless Steel
Mueller 250 Sq.Ft. Sanitary Plate Heat Exchanger AT20SS F-10 for sale
Item # EX-477
***SOLD*** used Mueller 250 Sq.Ft. Sanitary Plate Heat Exchanger, Model AT20SS F-10. S/N 223807 Rated 100 PSI @ 150 Deg.F. 1-Section with Aprox. (82) 1' x 3' Stainless Steel Plates. Sq.Ft. is approximate. 3"/2" inlet/outlet. Overall Dims.: Aprox. 49" L x 17" W x 36" Deep, with S/S Legs
250
PLATE
STAINLESS STEEL
250 sq.ft. Shell and tube heat exchanger.
Item # EX-408
Approx. 250 sq.ft. Shell and tube heat exchanger. Approx. (100) 1/2" OD x 20' L tubes. Shell diameter ~13". Shell length ~20 feet
250
SHELL AND TUBE
Carbon Steel (CS)
275 Sq.Ft. APV Crepaco, Titanium, Plate Exchanger
Item # EX-433
Used approx. 275 Sq.Ft. APV Crepaco, Titanium, Plate Exchanger, Model # SR6-GLM-T. Rated for 100 psi @ 200 F. (37) 20" x 56" Titanium Plates with EPDM Gaskets. 5' 11.75" High x 20" Wide x 4' 2.5" Deep. Serial #76646, NB# 2667, Built 1988. Previous Use: Sodium Hypochlorite Cooler
275
PLATE
TITANIUM
UNUSED Sanitary AGC Plate Heat Exchanger/Pasteurizer for sale
Item # EX-484
***SOLD*** UNUSED Sanitary AGC Plate Heat Exchanger/Pasteurizer. (140) 316 SS Plates, plates are approx. 12" x 30". Model AGC PRO2-XPH, Size 5. Rated 200 PSI @ 250 Deg.F.. 2.5" in/out on end plate and 2" in/out center.
350
PLATE
316SS
440 Sq.Ft Alfa Laval Plate Heat Exchanger
Item # EX-350
440 Sq.Ft Alfa Laval Plate Heat Exchanger. Stainless Steel Plates.
440
PLATE
Stainless Steel
500 Sq.Ft. INCONEL 600 (high Nickel Alloy) Shell and Tube Heat Exchanger
Item # EX-411
***SOLD***Approx. 500 Sq.Ft. INCONEL 600 (high Nickel Alloy) Shell and Tube Heat Exchanger. (105) 3/4"OD x 24' Lgth. Tubes. Shell is 14" Dia. Openings Shell: (1) 3" Flg. (1) 2" Flg.. Heads: (2) 3" (one on each head). Rated 200/FV @ 900 degF on tubes and 200/FV @ 650 degF on shell side. UNIT APPEARS TO BE UNUSED.
500
SHELL AND TUBE
INCONEL 600 (SB163)
500 Sq. Ft. Stainless Steel Shell and Tube Heat Exchanger for sale
Item # EX-487
***SOLD*** 500 Sq.Ft. Stainless Steel Shell and Tube Heat Exchanger. Shell and Tubes rated 150 PSI @ 300 Deg.F. 304 Stainless Steel. (270) 0.625" 304SS Tubes (2) Pass. 8" Inlet and outlet. Built by IPAC 2000. 16" Dia. x 11'8" Tube lgth. 15' OAL.. NB# 8494. APPROX. 3,500 LB.
500
SHELL AND TUBE
304 SS
500 Sq.Ft. Shell and Tube Heat Exchanger for sale
Item # EX-480
***SOLD*** used 500 Sq.Ft. Shell and Tube Heat Exchanger. 316L Stainless Steel TUBES: (220) 3/4" x 12' (4) Pass rated 75/FV PSI @ 20/320 Deg.F. SHELL is 18" Dia. x 14' OAL, rated 75 PSI @ 20/320 Deg.F.. Tube inlet/outlet 3". Shell inlet/outlet 4". Built by Perry Products. Model FTSMX18-518.
500
SHELL AND TUBE
316L STAINLESS STEEL
500 Sq.Ft. Shell and Tube Heat Exchanger for Sale
Item # EX-475
used 500 Sq.Ft. Shell and Tube Heat Exchanger. 316L Stainless Steel TUBES: (216) 3/4" x 12' (8) Pass rated 75 PSI @ 20/320 Deg.F. SHELL is 18" Dia. x 14' OAL, rated 75 PSI @ 20/320 Deg.F. Tube inlet/outlet 3". Shell inlet/outlet 4".
508
SHELL AND TUBE
316L STAINLESS STEEL
820 Sq.ft. Shell and Tube Kettle type reboiler
Item # EX-209
Used approx. 820 Sq.ft. Shell and Tube Kettle type reboiler. (64) 2 3/8" OD x 20' 3/16" T/T, Sch 80, tubes. BKU
820
REBOILER
316L Stainless Steel
820 Sq.ft. Shell and Tube Kettle type reboiler
Item # EX-368
Used approx. 820 Sq.ft. Shell and Tube Kettle type reboiler. (64) 2 3/8" OD x 20' 3/16" T/T, Sch 80, tubes. Size 36-60-240. BKU
820
REBOILER
CARBON STEEL SA-106
892 Sq.ft. Shell and Tube heat exchanger
Item # EX-286
892 Sq.ft. Shell and Tube heat exchanger.(316) 5/8" OD x 17'4" Tubes. U Tube. High pressure. Tube and shell both rated 2000 PSI @ 650 degF.
892
SHELL AND TUBE
?
900 Sq.Ft. Sanitary Shell and Tube Heat Exchanger Sanitary
Item # EX-467
used 926 Sq.Ft. Sanitary Shell and Tube Heat Exchanger. Enerquip Sanitary 304L Stainless Steel. TUBES: (178) 3/4" x 240" (8) Pass rated 150 PSI @ 375/-20 Deg.F. SHELL is 18" Dia. rated 150 PSI @ 375/-20 Deg.F.. Tube inlet/outlet 2.5". Shell inlet/outlet 4". Built to 3-a Dairy Standard. Exterior side finish 40 Ra max. Product side finish 32 Ra max. Built 2014.
926
SHELL AND TUBE
304L STAINLESS STEEL
941 Sq.Ft. Sanitary Shell and Tube Heat Exchanger Sanitary
Item # EX-466
***SOLD*** used 941 Sq.Ft. Sanitary Shell and Tube Heat Exchanger. Built by Enerquip. Sanitary 304L Stainless Steel. TUBES: (240) 3/4" x 240" (8) Pass rated 150 PSI @ 375/-20 Deg.F. SHELL is 20" Dia. rated 150 PSI @ 375/-20 Deg.F.. Tube inlet/outlet 2.5". Shell inlet/outlet 4". Built to 3-A Dairy Standard. Exterior side finish 40 Ra max. Product side finish 32 Ra max. Built 2014.
941
SHELL AND TUBE
304L STAINLESS STEEL
945 Sq.Ft. Titanium Spiral Heat Exhangers. Alfa-Laval model 1H-L-1T
Item # EX-449
used 945 Sq.Ft. Titanium Spiral Heat Exhangers. Alfa-Laval model 1H-L-1T. Contact material in SB-265Gr.2 Ti. Rated 175 PSI @ 175 Deg.F.
945
SPIRAL
TITANIUM
1000 Sq.Ft. Used shell and tube heat exchanger
Item # EX-198
Qty (2) each: 1000 Sq.Ft. Used shell and tube heat exchanger. (319) 3/4" x 15'6" SA-179/SB 111 COPPER AND COPPER ALLOY tubes. AES, AEU. Rated 100 PSI @ 400 degF on both shell and tube sides.
1000
SHELL AND TUBE
Copper SB-111
1000 Sq.ft. Used shell and tube heat exchanger
Item # EX-195
(1) 1000 Sq.ft. Used shell and tube heat exchanger. (319) 3/4 OD x 16'. Tube material SA-174 inside SB-111 Admiraly Brass outside. AES. Rated 150 PSI @ 400 degF on both shell and tube sides.
1002
SHELL AND TUBE
Bimetal
1170 Sq.Ft. Used shell and tube Kettle type reboiler
Item # EX-288
Qty. (2) Each: 1170 Sq.Ft. Used shell and tube Kettle type reboiler, heat exchanger. (280) 1" OD x 16' tubes. BKU
1170
REBOILER
CS
1500 sqft MUELLER model AT40 B-20, stainless steel plate heat exchanger
Item # EX-420
***SOLD*** ~1500 sqft MUELLER model AT40 B-20, stainless steel plate heat exchanger. 4" inlet/outlet. Rated 100 PSI @ 150/32 degF. 250 Plates. Previously used in sanitary food plant.
1500
PLATE
Stainless Steel (SS)
1600 Sq.ft. Shell and Tube heat exchanger
Item # EX-275
1600 Sq.ft. Shell and Tube heat exchanger. Used shell and tube heat exchanger. Square foot is estimated. Approx. 600 tubes @ 3/4 dia x 14' L. Size is 27-174. Re-tubed in 1991 and never put back into service. BEU
1600
SHELL AND TUBE
CS
1760 Sq.Ft. Stainless Steel Shell and Tube heat exchanger
Item # EX-386
Used Approx. 1760 Sq.Ft. Stainless Steel Shell and Tube heat exchanger. Stainless Steel Shell rated 150 PSI @ 200 Deg.F. (600) 3/4" x 15' 304 Stainless Steel Tubes rated 150 PSI @ 200 Deg.F. Shell is 2'6" dia. x 15' lgth. Last use was sugar solution and water.
1760
SHELL AND TUBE
304 Stainless Steel
1760 Sq.Ft. Stainless Steel Shell and Tube heat exchanger
Item # EX-387
Used Approx. 1760 Sq.Ft. Stainless Steel Shell and Tube heat exchanger. Stainless Steel Shell rated 150 PSI @ 200 Deg.F. (600) 3/4" x 15' 304 Stainless Steel Tubes rated 150 PSI @ 200 Deg.F. Shell is 2'6" dia. x 15' lgth. Last use was sugar solution and water.
1760
SHELL AND TUBE
304 Stainless Steel
2700 Sq.Ft. Carbon Steel U tube heat Exchanger
Item # EX-352
Approx. 2700 Sq.Ft. Carbon Steel U tube heat Exchanger. Approx 30" dia. x 20' lgth. BEU
2700
SHELL AND TUBE
CS
3463 Sq.Ft. ALFA LAVAL model A15-BFG, Stainless Steel plate heat exchanger
Item # EX-235
3463 Sq.Ft. ALFA LAVAL model A15-BFG, Stainless Steel plate heat exchanger. 432 plates each approx. 2' W x 5' H. 6" inlet/outlet.
3463
PLATE
SS
3,780 sqft stainless steel shell and tube heat exchanger for sale
Item # EX-464
***SOLD*** used 3,780 Sq.Ft. stainless steel shell and tube heat exchanger. STAINLESS STEEL TUBES: (514) 1" OD x 28'3" L, Rated 100 PSI @ 400/-20 degF.. STAINLESS STEEL SHELL: Rated 70 PSI @ 400/-20 degF. 32" dia x 32' L. HEADS: Stainless Steel With SS Clad end plates.
3780
SHELL AND TUBE
304L Stainless Steel
3900 Sq.Ft. APV model TR9AVO, Plate Heat Exchanger
Item # EX-212
3900 Sq.Ft. APV model TR9AVO, Plate Heat Exchanger. Stainless Steel plates
3900
PLATE
316 Stainless Steel
3917 sq.ft. Shell and Tube Heat Exchangers
Item # EX-211
Qty (4) Each used 3917 sq.ft. Shell and Tube Heat Exchangers. Carbon Steel Shell Rated 300 PSI @ 532 deg.F. (1147) 3/4 x 18' Carbon Steel tubes rated 300 PSI @ 532 Deg.F.. Type BEM.
3917
SHELL AND TUBE
SA-106
3900 Sq.Ft. APV, model TR9AVO Stainless Steel plate heat exchanger
Item # EX-193
3900 Sq.Ft. APV, model TR9AVO Stainless Steel plate heat exchanger. 328 Stainless Steel plates
3987
PLATE
316 Stainless Steel
4600 Sq.Ft. ALFA LAVAL model A15-BFG. Stainless Steel plate heat exchanger
Item # EX-148
4600 Sq.Ft. ALFA LAVAL model A15-BFG. Stainless Steel plate heat exchanger. 592 Stainless Steel plates. 6" inlet/outlet.
4682
PLATE
316 Stainless Steel
5290 Sq. Ft heat exchange
Item # EX-347
5290 Sq. Ft heat exchanger. (640) 3/4" U tubes. DEU
5290
SHELL AND TUBE
CS
5955 Sq.Ft. Shell and tube heat exchanger
Item # EX-346
5955 Sq.Ft. Shell and tube heat exchanger. (1300) 5/8" dia. x 28' lgth tubes. DED. Quoted AIWI
5955
SHELL AND TUBE
A-214 CS