Used process equipment
Used Stainless Steel TanksUsed Chemical Processing EquipmentUsed Stainless Steel Tank Reactor and Heat Exchangerused reactors tanksUsed Mix TanksUsed Pressure VesselsUsed Carbon Steel TanksUsed Stainless Steel Reactors
Ecrecon, Inc. Your Source for Quality Used Process Equipment

Inventory

Use the navigation to the left to select products. Once selected you can perform a detailed search within that category.


Mills / Grinders

 1 
 

Photo

MIL-25

Photos
(4)
Type:
COLLIOD MILL 
Manufacturer:
GREERCO 
Model:
W750H 
Used GREERCO Model W750H Horizontal In-Line Colloid Mill. Has NEW Stator, Stator Housing, and end plate. Has stainless steel adjustable rotor/stator. Nominally rated 30-120 gpm depending on gap settings. Explosion Proof 20 HP, 230/460 volt, 3520 RPM, 60Hz Drive. Mounted on wheels.  

Photo

MIL-35

Photos
(1)
Type:
CONE MILL 
Manufacturer:
KEMUTECH, KEK 
Model:
 
KEMUTECH, KEK "Quadro Comil Style" Portable Cone/Beta Mill/Grinder, used, Stainless Steel frame, stainless steel contact parts, 10/5HP 3/60/220-440V, 2-speed motor. Throughput estimated capacity up to 3,000KG (6,600LBS.) per hour. Approx. 8" Discharge. 11.5" x 9.75" ID inlet on feed-throat into 12" dia. opening into Mill. Last use was Pharmaceutical. Sanitary construction. Sold As Is. 

Photo

MIL-31

Photos
(4)
Type:
CUTTER/CHOPPER 
Manufacturer:
STEPHAN 
Model:
VCM40 
Used STEPHAN model VCM 40 Chopper/Mixer/Cutter. 5.5/7.5 KW, 220 Volt, 1750/3500 RPM, 3 Ph, 60 Hz motor. Mounted on Portable Stainless Steel base with steps. 

Photo

MIL-40

Photos
(3)
Type:
CUTTER/CHOPPER/MIXER 
Manufacturer:
HOBART 
Model:
HCM 450 
used Hobart model HCM450 Cutter/Mixer/Chopper. 45 Quart capacity. 5 HP, 1140 RPM, 3 Ph. motor. 

Photo

MIL-2

Photos
(3)
Type:
GRANULATOR 
Manufacturer:
BALL & JEWELL 
Model:
MVP810 
Granulator. Ball & Jewell Mavrick model MVP810. 5 HP, 1165 rpm, 220/440 volt motor. Unit mounted on wheels. Last used in plastic 

Photo

MIL-3

Photos
(2)
Type:
GRANULATOR 
Manufacturer:
CUMBERLAND 
Model:
8x10 
Cumberland Model 8x10 Granulator. Mounted on wheels. Last used in Plastic 

Photo

MIL-22

Photos
(4)
Type:
GRINDER/EXTRUDER 
Manufacturer:
JOHN E SMITH 
Model:
66BG 
used Buffalo Model 66.BG Meat Grinder/Extruder. Built by John E Smith Co. Screw is 6" dia. x 17" Lgth. Driven by 30 HP motor. Last used to grind large chunks of bacon at food plant. 

Photo

MIL-30

Photos
(5)
Type:
HAMMER / DISINTEGRATOR 
Manufacturer:
REITZ 
Model:
RP-12-K-122 
(2) Used REITZ Disintegrators (Hammer Mills) Model RP-12-K-122. Units Mounted on a 45 deg angle.
Unit A: RP-12-K-122, S/N RP-661794.
Unit B: RP-12-K-122, S/N RP-732071.
60 HP Drives.
Last used in Food Plant. Sanitary Construction.
 

Photo

MIL-18

Photos
(4)
Type:
HAMMER / DISINTEGRATOR 
Manufacturer:
RIETZ 
Model:
RP-6-K115 
Reitz Model RP-6-K115, Portable Disintegrator Mill, Driven by Reliance 3 HP Variable Speed (vari-speed) Drive, size 221, RPMmax 12,000/RPMmin 1,800, 230/460 V. Mounted on factory cart with casters. Last used in Pharmaceutical application. 

Photo

MIL-5

Photos
(4)
Type:
HAMMER MILL 
Manufacturer:
FITZPATRICK 
Model:
Fitzpatrick Model J Homoloid Mill. 1.5 HP, 3450 RPM. Mounted on stand with wheels. 

Photo

MIL-6

Photos
(5)
Type:
HAMMER MILL 
Manufacturer:
FITZPATRICK 
Model:
Fitzpatrick Hammer Mill Model D. 10 HP 220/440V XP drive. 

Photo

MIL-41

Photos
(7)
Type:
HAMMER MILL 
Manufacturer:
FLUIDAIR 
Model:
003 
Used Fluid Air Impact/Screening/Hammer Mill, Model 003, Stainless Steel. Stainless steel fixed rotor with bars, 4" x 15" cutting chamber with bottom screen. Approx. 13" x 13" x 11" Deep Feed Hopper with 2" Screw driven by a 1 hp, 3/60/230/460 volt, 1745 rpm XP gear motor. Mill driven by a 5 hp, 3/60/575 volt, 3465 rpm, XP motor. Includes a control panel for feed rated and Mill. Mounted on a stainless steel base with casters. Last used in Pharmaceutical plant. Approx. 2' x 3'6" x 6' OAH. 

Photo

MIL-36

Photos
(7)
Type:
HAMMER MILL 
Manufacturer:
FITZPATRICK 
Model:
DAS O6 
used Fitzmill Hammer mill/Comminutor, Model DASO6, 5 HP 208-230/460 volt, 1740 rpm motor, with Pan type feed. Stainless Steel contact parts. Mounted on Steel stand. 

Photo

MIL-37

Photos
(4)
Type:
HAMMER MILL 
Manufacturer:
FITZPATRICK 
Model:
used Fitzmill Comminutting model D Hammer Mill. Has 15 HP, 230/240 volt motor. 11" Dia. opening 

Photo

MIL-34

Photos
(9)
Type:
HIGH SHEAR DISPERSER 
Manufacturer:
IKA 
Model:
DR2005/5 
IKA Dispax Reactor system with (3) Each IKA model DR2005/5 Inline High Shear units rated at 2500 l/h (660 GPH) each, piping, valves, pumps and control panel. Last used in toothpaste plant (Sanitary Application). The IKA DISPAX-REACTOR DR 2000 is a three-stage high shear inline dispersing machine used for the production of very fine emulsions and suspensions. Can be sold individually.  

Photo

MIL-8

Photos
(2)
Type:
JET MILL 
Manufacturer:
 
Model:
 
Used Jet Mill. 36" Dia. with 2" Dia. ring. On wheels 

Photo

MIL-9

Photos
(3)
Type:
JET MILL 
Manufacturer:
 
Model:
 
Used Jet Mill. 46" Dia. with 3" Dia. Ring. Mounted on wheels. 

Photo

MIL-39

Photos
(6)
Type:
JET MILL 
Manufacturer:
Sturtevant Inc. 
Model:
20" 
Used Sturtevant Micronizer Jet Mill. Model: 20" diameter. Stainless Steel contact parts. 12 nozzles. Rated capacity: 100 - 1000 lbs. per hour. Requires 550 SCFM of air/gas. Top cover is removable. Appears to be unused.  

Photo

MIL-32

Photos
(5)
Type:
LUMP BREAKER 
Manufacturer:
COMMERCIAL 
Model:
 
used Commercial Lump Breaker (de-lumper) . S/N CB030510820. Job 10820. Unit has chute with 2 roller type lump breakers. Rollers have adjustable opening. The feed hopper opening is approx.. 2 x 2 and the feed throat is approx.. 1 x 1. Last use was food plant. Unit has SEW 1.5 HP, 230/460 drive. 

Photo

MIL-10

Photos
(2)
Type:
MEDIA MILL 
Manufacturer:
ASHIZAWA 
Model:
SP50TEX-V 
ASHIZAWA Vertical media / pearl / bead mill. Agitator motor 11 kw, 480 v, Shaft speed 71 to 287 RPM. Capacity of grinding vessel 41.6 ltr. Minimum Bead size 0.3mm. Mechanical Seal. 316SS contact parts. 

Photo

MIL-38

Photos
(5)
Type:
PEBBLE MILL 
Manufacturer:
Paul O. Abbe 
Model:
 
Paul Abbe pebble mill/ball mill. 17" ID x 18" (inside dimensions). Driven by 3 HP, 1745 RPM, 208-230/460 V motor into a Link Belt gear. 
 
 1 




Used Process Equipment | Used Stainless Steel Tank | Sell Used Chemical Process Equipment | Process Equipment Appraisals | Used Reactor | Buy and sell Manufacturing Chemical Plants | Refinery for sale | Buy Oil Refinery | Ethanol Plant Equipment | Used Tanks | Used Heat Exchangers | Used Filters | Used Mills | Used Granulators | Used Twin Shell Blender | Used Column | Distillation Column | Industrial Sites For Sale | Industrial Dismantling | Industrial Demolition | Used Centrifuges | Used Blenders | Used Mixers | Used Dryers | Used Screeners | Used Pumps | Mix Tanks | Pressure Vessels | Chemical Plants | Used Vacuum Pumps | Used Food Processing Equipment | Surplus Process Equipment | Used Process Equipment | Used Pharmaceutical Equipment | Polymerization

Sign Up for Our Newsletter New Arrivals Plant Liquidation Plant Dismantling Short on time? Tell us what you need!


Plant Picture Tank Picture Pumps Picture Tank Picture 2