Inventory
Use the navigation to the left to select products. Once selected you can perform a detailed search within that category.
|
EX-179 Photos (1) | FT2: | Tube Mat: KARBATE | Type: | Size 13 x 168. Material SA-53. |
|
EX-180 Photos (0) | FT2: | Tube Mat: | Type: BLK | 15 x 19. |
|
EX-203 Photos (0) | FT2: | Tube Mat: | Type: BLK | 20 x 16 x 16. |
|
EX-206 Photos (0) | FT2: | Tube Mat: | Type: | |
|
EX-216 Photos (0) | FT2: | Tube Mat: | Type: | |
|
EX-314 Photos (1) | FT2: | Tube Mat: GRAPHITE | Type: | 6'L x 8" dia, SIZE 08072 |
|
EX-223 Photos (3) | FT2: | Tube Mat: | Type: SPC | Air exchanger. 4 inlet/outlet shell. 2 inlet/outlet tubes. |
|
EX-229 Photos (0) | FT2: | Tube Mat: | Type: | 12' tubes. Shell is 18 dia. Openings: Tube side: 2-4. Type 1MV-2 |
|
EX-252 Photos (0) | FT2: | Tube Mat: GRAPHITE | Type: | |
|
EX-253 Photos (0) | FT2: | Tube Mat: GRAPHITE | Type: BLK | 1'4 x 1'4 x 1'4. |
|
EX-306 Photos (3) | FT2: | Tube Mat: Stainless Steel (SS) | Type: P/F | Stainless Steel plate & frame heat exchanger. 4" inlet/outlet. Plates are approx. 2' W x 4' H. Hydro test hot side/cold side 113 psig. |
|
EX-315 Photos (1) | FT2: | Tube Mat: GRAPHITE | Type: | 10' L x 6 1/2 " dia |
|
EX-316 Photos (1) | FT2: | Tube Mat: GRAPHITE | Type: | 9' L x 6" dia |
|
EX-317 Photos (1) | FT2: | Tube Mat: GRAPHITE | Type: SHELL AND TUBE | 106 1/2" L x 6 " dia |
|
EX-227 Photos (3) | FT2: 2 | Tube Mat: | Type: SPIRAL | UNUSED. Spiral tube. ~ 2 sq. ft. 10" dia x 2' L |
|
EX-146 Photos (0) | FT2: 3 | Tube Mat: | Type: SPIRAL | Pressures listed are test pressures. |
|
EX-165 Photos (2) | FT2: 6 | Tube Mat: SS | Type: P/F | Approx. 6 Sq.Ft. Plate exchanger. Has (7) approx. 5" x 28" plates. Has 1" treaded openings. |
|
EX-342 Photos (3) | FT2: 10 | Tube Mat: Stainless Steel | Type: | Stainless Steel (24)~1/4 tubes x 5'6 lgth. Shell has 1 opening. Tubes ~ 1.5 openings |
|
EX-349 Photos (5) | FT2: 12 | Tube Mat: Stainless Steel (SS) | Type: U tube | Stainless Steel Shell & Tube heat exchanger. Shell is 6" diameter. Has (4) U-tubes (8 holes), 1" OD x 6' L. Carbon Steel head. Unit with NB# 6912, shell re-rated to 100/FV @ 450 degF. Previously used as after condenser. |
|
EX-161 Photos (1) | FT2: 14 | Tube Mat: SS | Type: | Both shell and tube are also rated for -20 deg. @ 150psi. 12 tubes @ 3/4 O.D. Tubes are 6' long. |
|
EX-167 Photos (0) | FT2: 15 | Tube Mat: BRASS | Type: | 47 BRASS tubes, 3'3 long. Tubes are 3/8 O.D., 5/16. |
|
EX-298 Photos (0) | FT2: 15 | Tube Mat: SB62 bronze (copper) | Type: shell & tube | HELITHERM steam to water heat exchanger. Steam is primary or tube side fluid and Water is secondary or shell side fluid. Shell is 10.5" dia x 34.75" L. Has 3 coils. |
|
EX-313 Photos (0) | FT2: 15 | Tube Mat: | Type: U tube | Approximatley 15 Sq.Ft.. Shell is 8.5". Tuble length 4'. 2" tube inlet/outlet. Shell has 3" and 1.5" |
|
EX-152 Photos (2) | FT2: 18 | Tube Mat: 304L SS | Type: BEU | (5) U tubes 3/4 OD x 113 x 14 BWG. |
|
EX-230 Photos (3) | FT2: 18 | Tube Mat: SS | Type: P/F | 2" inlet/outlet |
|
EX-151 Photos (4) | FT2: 19 | Tube Mat: 304L SS | Type: BEU | (3) U tubes 3/4 OD x 192 x 14 BWG. |
|
EX-355 Photos (4) | FT2: 23 | Tube Mat: SS | Type: Plate | Approx. 23 Sq.Ft. Plate Heat Exchanger. Model AT10-C-30. Paul Mueller. (14) 8" x 30 Plates. |
|
EX-320 Photos (4) | FT2: 25 | Tube Mat: Stainless Steel (SS) | Type: U tube | 25 sqft. Shell/U-tube heat exchanger. TUBES: Stainless Steel (9 u-tubes, 18 holes) 1" OD x 5'6" L. SHELL: Stainless Steel. Head is carbon steel. |
|
EX-175 Photos (2) | FT2: 28 | Tube Mat: INCONEL600 | Type: U | Shell: 2 inlet/outlet. Tube: 1.5" inlet/outlet. (24) 1" OD tubes, Tube length = 54"/ SCRAP. Hole in the shell. Look at at EX-178 |
|
EX-183 Photos (3) | FT2: 30 | Tube Mat: SS | Type: BEU | 6' long x 8" diameter. |
|
EX-219 Photos (0) | FT2: 32 | Tube Mat: Karbate | Type: | (18) 1 OD x 9' tubes. Head flange missing. Square footage estimated. |
|
EX-356 Photos (2) | FT2: 33 | Tube Mat: SS | Type: Plate | Approx. 33 Sq.Ft. Plate Heat Exchanger. Model AT10-C-20. Paul Mueller. (20) 8" x 30 Plates |
|
EX-159 Photos (0) | FT2: 37 | Tube Mat: BRASS | Type: | 42 tubes @ 3/8 O.D. Tubes are 9' long, Brass. |
|
EX-182 Photos (0) | FT2: 40 | Tube Mat: SS | Type: BEM | 12' long x 6" diameter. Square footage estimated. |
|
EX-184 Photos (0) | FT2: 48 | Tube Mat: COPPER | Type: | (61) tubes @ 7/8" OD x 4' L. Shell dia. = 10", OAL = 5'8". 2" NPT inlet/outlet on shell and tube sides. Shell thickness .365", head thickness .188". |
|
EX-186 Photos (0) | FT2: 50 | Tube Mat: | Type: BEM | 6" diameter x 12' long. Fixed tube. Square footage estimated. |
|
EX-323 Photos (2) | FT2: 50 | Tube Mat: SS | Type: U | Approximately 50 sq.ft. Sanitary Construction Shell and Tube Heat Exchanger. Shell is Approx 7" dia.x 9' lgth. Shell openings: 1-1"; 1-3"; 2-1" NPT. Unit has (36) 7/16"ID tubes. |
|
EX-327 Photos (1) | FT2: 50 | Tube Mat: SS | Type: U | Approximately 50 sq.ft. Sanitary Construction Shell and Tube Heat Exchanger. Shell is Approx 7" dia.x 9' lgth. Shell openings: 1-1"; 1-3"; 2-1" NPT. Unit has (36) 7/16"ID tubes. |
|
EX-214 Photos (1) | FT2: 55 | Tube Mat: GRAPHITE | Type: | |
|
EX-297 Photos (1) | FT2: 57 | Tube Mat: graphite | Type: shell & tube | (31) tubes @ 3/4" OD x 114" L. 4" inlet/outlet. |
|
EX-204 Photos (0) | FT2: 58 | Tube Mat: | Type: | Sqft is approx. Shell is 8dia x 8' L. |
|
EX-228 Photos (4) | FT2: 60 | Tube Mat: GLASS | Type: | 31 tubes @ 10'6 L x 0 .5 dia. OAL = 10'6, Shell dia = 6". Exchanger is all glass. |
|
EX-360 Photos (2) | FT2: 60 | Tube Mat: Stainless Steel | Type: Plate | Approx. 60 Sq.Ft. SuperChanger Plate Heat Exchanger. (28) 12" x 34" Plates. Model UX-126-MJ-30. NB 17312. Unit Rated 300 PSI @ 350 F. |
|
EX-357 Photos (2) | FT2: 69 | Tube Mat: SS | Type: Plate | 69 Sq.Ft. Alfa Laval Type P32SA Plate Heat Exchanger. |
|
EX-162 Photos (0) | FT2: 76 | Tube Mat: COPPER | Type: | COPPER tubes are 5/8th I.D. and 13/16 O.D. 60 tubes at 6' long. |
|
EX-279 Photos (0) | FT2: 76 | Tube Mat: GRAPHITE | Type: | 31 tubes @ 1" OD x 9'5"L. |
|
EX-333 Photos (5) | FT2: 80 | Tube Mat: 316 Stainless Steel (SS) | Type: U | Approximately 80 sq.ft. Sanitary Construction Shell and Tube Heat Exchanger. Shell 4" in/out; Tubes 1.5" in/out. Unit has (72) 5/16"ID x 9'L tubes. |
|
EX-166 Photos (0) | FT2: 81 | Tube Mat: CS | Type: | 9' long tubes. 3/4 O.D. 46 tubes. |
|
EX-173 Photos (5) | FT2: 87 | Tube Mat: 316 SS | Type: P/F | Type PF35. (29) plates. |
|
EX-324 Photos (4) | FT2: 90 | Tube Mat: 316SS | Type: U | Approximately 90 sq.ft. Sanitary Construction Shell and Tube Heat Exchanger. Shell is Approx 9" dia.x 9' lgth. Shell openings: 2-3"; 2-1" NPT. Unit has (80) 5/16"ID tubes. |
|
EX-328 Photos (2) | FT2: 90 | Tube Mat: 316SS | Type: U | Approximately 90 Sq.ft. Sanitary Construction Shell and Tube Heat Exchanger. Shell is Approx 9" dia.x 9' lgth. Shell openings: 2-3"; 2-1" NPT. Unit has (80) 5/16"ID tubes. N/A |
|
EX-338 Photos (2) | FT2: 90 | Tube Mat: SS | Type: U | Approx. 90 Sq. Ft. Allegheney Bradford Corp Horizontal Sanitary Stainless Shell & Tube Heat Exchanger. Shell rated 150 psi @ 350F; Tubes rated 150 psi @ 350F. (144) 5/16" diameter tubes; length approx 80". Serial # 11112-07. Built 1996. |
|
EX-343 Photos (0) | FT2: 92 | Tube Mat: SA334 | Type: BKU | 92 Sq.Ft. Kettle type Reboiler. (15) 3/4" OD U Tubes. |
|
EX-322 Photos (0) | FT2: 92 | Tube Mat: Stainless Steel (SS) | Type: Plate (P/F) | Stainless Steel Plate/Frame 92.6 sq.ft. heat exchanger manuf. by SUPERCHANGER. Model UX-195-SP-45. 2" inlet/outlet. |
|
EX-259 Photos (2) | FT2: 96 | Tube Mat: 316L SS | Type: P/F | 18 plates @ 16 W x 48 L. 2 inlet/outlet. |
|
EX-177 Photos (0) | FT2: 100 | Tube Mat: TITANIUM | Type: | (48) 1" OD x 8' tubes. Heads are SA234, tube sheet SB463. |
|
EX-319 Photos (1) | FT2: 100 | Tube Mat: GRAPHITE | Type: Shell/tube | Approx. 100 sqft. (estimated) 144"L x 10" dia. No nameplate. |
|
EX-325 Photos (4) | FT2: 100 | Tube Mat: SS | Type: U tube | Approximately 100 sq.ft. Sanitary Construction Shell and Tube Heat Exchanger. Shell is Approx 9" dia.x 7' lgth. Shell openings: 1-2"; 1-3"; 2-1" NPT. Unit has (88) 7/16"ID tubes. |
|
EX-348 Photos (2) | FT2: 102 | Tube Mat: SS | Type: BEM | 102 Sq.Ft. Shell and tube heat exchanger. (104) 3/4" x 5' lgth tubes/ 4" Inlet/outlet tube side. 4" Inlet/outlet shell side. SS Heads. |
|
EX-266 Photos (3) | FT2: 106 | Tube Mat: 316L | Type: P/F | Used Approx. 106 Sq.Ft. Super Changer Plate Exchanger. Model UX-216-HP-48. (20) plates @ 16 x 48. 2" inlet/outlet. Rated 75 PSI @ 225 F. |
|
EX-197 Photos (1) | FT2: 108 | Tube Mat: 316LSS | Type: BKU | 100 Sq.ft. Kettle type Reboiler. (16) 2.375 DIA U Stainless Steel tubes. CS head |
|
EX-199 Photos (1) | FT2: 108 | Tube Mat: 316L | Type: BKU | 108 Sq.Ft. Kettle type Reboiler. (16) 2.375 DIA Stainless Steel tubes. SS heads. |
|
EX-244 Photos (3) | FT2: 120 | Tube Mat: GRAPHITE | Type: | 120 Sq.Ft. Graphite condenser. Used as vent condenser. 10 dia x 144. 4" inlet/outlet. |
|
EX-358 Photos (0) | FT2: 125 | Tube Mat: SS | Type: U | Approx. 125 Sq.Ft. Sanitary construction Shell and Tube Heat Exchanger. Approx. 9" Dia. x 9' Lgth. Shell openings:2-4"; 2-1" NPT. Unit has (108) 5/16"ID Tubes. |
|
EX-176 Photos (2) | FT2: 144 | Tube Mat: 316SS | Type: | 140 Sq.Ft. Sq.ft. Shell and Tube heat exchanger.(46) Stainless Steel tubes @ 3/4" OD x 16'L. Shell is 8" diameter x 16' L. With expansion joint, mounted on saddles. Openings: shell 1-2", 1-3" at 180 deg opposite sides; head 2-3". |
|
EX-359 Photos (2) | FT2: 150 | Tube Mat: Stainless | Type: Plate | Approx. 150 Sq.Ft. Used Paul Mueller Plate Heat exchanger. model AT161B-10. (23) 18" w x 54" plates. Part No. 9814361 |
|
EX-181 Photos (4) | FT2: 164 | Tube Mat: CS | Type: SPEC | Tank mounted 12" 150# flange. Product flows through a 10" pipe past U tubes, out a 6" 150# flange. |
|
EX-312 Photos (6) | FT2: 200 | Tube Mat: SS | Type: U-TUBE | Stainless Steel Horizontal Condenser, 18" OD x 9' OAL, Head type F & D / FLAT. |
|
EX-311 Photos (0) | FT2: 218 | Tube Mat: Stainless Steel (SS) | Type: U tube | 218 Sq.Ft. Stainless steel shell and tubes heat exchanger. (36)U-tubes (76 holes) 1" OD x 11'L. Has CS head. |
|
EX-336 Photos (2) | FT2: 250 | Tube Mat: SS | Type: | Approx. 250 Sq. Ft. Allegheney Bradford Corp Horizontal Sanitary Stainless Shell & Tube Heat Exchanger. Shell rated 150 psi @ 350 degF; Tubes rated 150 psi @ 350 degF. (280) 5/16" diameter tubes; length approx 112". Serial # 11112-08. National Board #549. Built 1996. |
|
EX-308 Photos (4) | FT2: 257 | Tube Mat: Stainless Steel (SS) | Type: BXM | 257 Sq.Ft. Used shell and tube heat exchanger. Tubes: (164), 3/4" OD x 96"L, stainless steel (SS), 8" inlet/outlet. Heads: 316 SS. Shell: Carbon Steel (CS) 15" diameter. Has a CS surge tank mounted on top. |
|
EX-256 Photos (0) | FT2: 260 | Tube Mat: | Type: | (199) tubes @ 1" OD x 5' L. Shell diameter = 20", OAL = 8'. |
|
EX-191 Photos (1) | FT2: 290 | Tube Mat: KARBATE | Type: | Shell is 13" dia x 18' L. 4" inlet/outlet on the shell. Tube inlet/outlet = 6" top, 4" bottom. Square footage is approx. |
|
EX-303 Photos (2) | FT2: 325 | Tube Mat: Stainless Steel | Type: Plate (P/F) | 325 Sq.Ft. Plate and frame heat exchanger. (49) 16" x 60" Stainless plates. 4" Inlets/outlets |
|
EX-254 Photos (4) | FT2: 332 | Tube Mat: SS | Type: BEM | 330 Sq.Ft. Used shell and tube heat exchanger. (106) 3/4" x 16' Stainless Steel tubes. 14" dia shell. Stainless Steel heads. Inlets/Outlets: shell side; 4" in/out, tube side; 6", 4", 2" in/out. |
|
EX-283 Photos (0) | FT2: 347 | Tube Mat: CS (SA-214) | Type: BKU | (40) U-tubes (80 holes) @ 1" OD x 16'6" Overall bundle length. Kettle type reboiler. 1" shell inlet/ 3" outlet. 3" tube inlet/1.5" outlet. |
|
EX-353 Photos (1) | FT2: 400 | Tube Mat: 316L Stainless Steel | Type: | 316L Stainless Steel Shell and Tube Heat Exchanger. (104) 0.625" dia. x ~24' Tubes. Approx 10" dia. x 25' lgth. |
|
EX-350 Photos (2) | FT2: 440 | Tube Mat: Stainless Steel | Type: Plate | 440 Sq.Ft Alfa Laval Plate Heat Exchanger. Stainless Steel Plates. |
|
EX-273 Photos (4) | FT2: 690 | Tube Mat: 304SS | Type: BEM | Approx. (220) Stainless Steel tubes @ 3/4" OD x 16' L. 2" inlet/outlet on tube side. 10" inlet/outlet on shell side. SS tubes and tube sheet. CS shell & heads. |
|
EX-302 Photos (3) | FT2: 704 | Tube Mat: SA-214 | Type: BEM | 704 Sq.Ft. Shell and tube heat exchanger. Previously used as product stripper reboiler. 224 tubes @ 3/4". Shell is 1'6" dia x 15'10"L |
|
EX-209 Photos (0) | FT2: 821 | Tube Mat: SA-106-B (CS) | Type: BKU | 820 Sq.ft. Shell and Tube Kettle type reboiler. (64) 2 3/8" OD x 21.75', Sch 80, tubes. |
|
EX-249 Photos (2) | FT2: 836 | Tube Mat: CS | Type: AES | 836 Sq.ft. Shell and Tube heat exchanger. Tubes 213 - 3/4 OD x 13 GA. AVG. x 20' L Welded SA - 214. Size = 18 OD x 20' L. Inlet/outlet on tubes and shell = 6. Head material = CS. |
|
EX-286 Photos (0) | FT2: 892 | Tube Mat: ? | Type: U | 892 Sq.ft. Shell and Tube heat exchanger.(316) 5/8" OD x 17'4" Tubes |
|
EX-198 Photos (4) | FT2: 1000 | Tube Mat: Copper SB-111 | Type: AES, AEU | 1000 Sq.Ft. Used shell and tube heat exchanger. (319) 3/4" x 15'6" SA-179/SB 111 COPPER AND COPPER ALLOY tubes |
|
EX-200 Photos (2) | FT2: 1000 | Tube Mat: Stainless Steel | Type: U | 1000 Sq.ft. Shell and Tube heat exchanger(319) 3/4 x 16' L Stainless Steel tubes. |
|
EX-294 Photos (1) | FT2: 1000 | Tube Mat: 304 SS | Type: AES | 1000 Sq.Ft. Used shell and tube heat exchanger. (324) Stainless Steel tubes @ 3/4" x 16'L. Shell is 22" dia. |
|
EX-195 Photos (0) | FT2: 1002 | Tube Mat: Bimetal | Type: AES | 1000 Sq.ft. Used shell and tube heat exchanger. (319) 3/4 OD x 16'. Tube material SA-174 inside SB-111 Admiraly Brass outside. |
|
EX-250 Photos (0) | FT2: 1090 | Tube Mat: CS | Type: AES | 1090 Sq.ft. Shell and Tube heat exchanger. Tubes 277 - 3/4 OD x 18 GA. AVG. x 20' L Welded SA - 214. Size = 20 OD x 20' L. Inlet/outlet on tubes and shell = 6. Head material = CS. |
|
EX-288 Photos (0) | FT2: 1170 | Tube Mat: CS | Type: BKU | 1170 Sq.Ft. Used shell and tube Kettle type reboiler, heat exchanger. (280) 1" OD x 16' tubes. |
|
EX-310 Photos (4) | FT2: 1370 | Tube Mat: 304L Stainless Steel | Type: NEN | 1370 Sq.ft. Shell and Tube heat exchanger. (211) 1.25" OD x 20' 304L SS tubes. 26" dia. Carbon steel Shell. Shell has (2) 8" flanges. Tube side has: 16" ; 2" and 4" openings. Last used as steam condenser. |
|
EX-300 Photos (6) | FT2: 1600 | Tube Mat: 304SS | Type: BE | 1600 Sq.ft. Shell and Tube heat exchanger. (842)3/4" x 10' lgth 304 Stainless Steel Finned tubes. Area listed is bare Sq.Ft. Stainless steel shell and tubes. Carbon steel heads. Shell side: (3)6" (1)16". Tube side (2)4". Removable tube bundle. |
|
EX-275 Photos (0) | FT2: 1600 | Tube Mat: CS | Type: BEU | 1600 Sq.ft. Shell and Tube heat exchanger. Used shell and tube heat exchanger. Square foot is estimated. Approx. 600 tubes @ 3/4 dia x 14' L. Size is 27-174. Retubed in 1991 and never put back into service. |
|
EX-351 Photos (1) | FT2: 2000 | Tube Mat: 316L Stainless Steel | Type: BEU | Approx 2000 Sq.Ft. (1150) 3/4" OD 316L Stainless Steel tubes, U tube Heat exchanger. Approx 3'4" dia. x 10'. Carbon Steel Head. |
|
EX-330 Photos (3) | FT2: 2059 | Tube Mat: SS | Type: Plate | Alfa Laval Plate heat exchanger. Model A15BFL. 765 mm plates. 6" Inlet/Outlet. Plates are approx. 5' x 23" w. |
|
EX-352 Photos (1) | FT2: 2700 | Tube Mat: CS | Type: BEU | Approx. 2700 Sq.Ft. Carbon Steel U tube heat Exchanger. Approx 30" dia. x 20' lgth. |
|
EX-272 Photos (0) | FT2: 2800 | Tube Mat: Stainless Steel (SS) | Type: | 2800 Sq.ft. Shell and Tube heat exchanger. 10" inlet/outlet on tube side. 12" & 10" inlet/outlet on shell side. Stainless Steel tubes and tube sheet. CS shell & heads. |
|
EX-240 Photos (3) | FT2: 3052 | Tube Mat: 316 Stainless Steel | Type: BEM | 3052 Sq.ft. Shell and Tube heat exchanger.(1555) 3/4" OD x 10' long 16 gauge Stainless Steel tubes. Shell is 3'10" OD. Shell has expansion joint and (4) lugs. 8" nozzles on heads. 6" nozzles on shell. |
|
EX-242 Photos (2) | FT2: 3300 | Tube Mat: CS | Type: AEU | 3300 Sq.ft. Shell and Tube heat exchanger. Size 48" dia. X 13' Lgth. 3/4" tube OD x 13' L. |
|
EX-235 Photos (0) | FT2: 3463 | Tube Mat: SS | Type: P/F | Stainless Steel plate heat exchanger. 436 plates. 6 inlet/outlet. |
|
EX-264 Photos (0) | FT2: 3540 | Tube Mat: CS | Type: U TUBE | 3540 Sq.ft. Shell and Tube heat exchanger. Has finned tubes. Tubes are 1" OD x 16' L. Shell diameter 2'6. OAL = 20'6. 3540 sqft includes the finns on the tubes. 10 inlet/outlet on shell side. 2 and 4 inlet/outlet on tube side. |
|
EX-241 Photos (4) | FT2: 3774 | Tube Mat: CS | Type: AES | 3774 Sq.ft. Shell and Tube heat exchanger.(743) 1" OD x 20' tubes. 43" dia. x 20' lgth. |
|
EX-212 Photos (0) | FT2: 3800 | Tube Mat: 316 Stainless Steel | Type: P/F | 3800 Sq.Ft. Plate Heat Exchanger. 328 Stainless Steel plates |
|
EX-211 Photos (0) | FT2: 3917 | Tube Mat: SA-106 | Type: BEM | 3917 sq.ft. heat exchanger. (1147) 3/4 x 18' tubes |
|
EX-193 Photos (0) | FT2: 3987 | Tube Mat: 316 Stainless Steel | Type: P/F | 3900 Sq.Ft. Stainless Steel plate heat exchanger. 328 Stainless Steel plates |
|
EX-148 Photos (2) | FT2: 4682 | Tube Mat: 316 Stainless Steel | Type: P/F | 4600 Sq.Ft. Stainless Steel plate heat exchanger. 592 Stainless Steel plates. 6" inlet/outlet. |
|
EX-347 Photos (0) | FT2: 5290 | Tube Mat: CS | Type: DEU | 5290 Sq. Ft heat exchanger. (640) 3/4" U tubes. |
|
EX-207 Photos (2) | FT2: 5532 | Tube Mat: 304 Stainless Steel | Type: P/F | 5500 Sq.Ft. Stainless Steel Plate heat exchanger.(364) Stainless Steel Plates. Nilrite gaskets. Frame is expandable to (500) plates. 16" inlet/outlet. |
|
EX-346 Photos (0) | FT2: 5955 | Tube Mat: A-214 CS | Type: DED | 5955 Sq.Ft. Shell and tube heat exchanger. (1300) 5/8" dia. x 28' lgth tubes. Quoted AIWI |
|
EX-345 Photos (0) | FT2: 11300 | Tube Mat: CS | Type: DED | 11300 Sq.Ft. Shell and tube heat exchanger. Last used as CO2 Cooler. 48" dia. x 46' lgth. Quoted AIWI |
.JPG)
.JPG)
.JPG)
 |
 |
 |
 |
 |
 |
 |
 |
 |
