|
EX-153
Photos
(1) | FT2:
| Tube Mat:
SS | Type:
SPIRAL | 20" dia x 8". Spiral exchanger is also rated for F/V on shell. Min. temp. on both shell and tubes is -20 at 140 psi. 2.5" inlet/outlet on both shell and tube side. |
|
EX-312
Photos
(3) | FT2:
| Tube Mat:
| Type:
U-TUBE | Stainless Steel Horizontal Condenser, 18" OD x 9' OAL, Head type F & D / FLAT. Quoted AIWI |
|
EX-179
Photos
(1) | FT2:
| Tube Mat:
KARBATE | Type:
| Size 13 x 168. Material SA-53. |
|
EX-180
Photos
(0) | FT2:
| Tube Mat:
| Type:
BLK | 15 x 19. |
|
EX-203
Photos
(0) | FT2:
| Tube Mat:
| Type:
BLK | 20 x 16 x 16. |
|
EX-206
Photos
(0) | FT2:
| Tube Mat:
| Type:
| |
|
EX-216
Photos
(0) | FT2:
| Tube Mat:
| Type:
| |
|
EX-314
Photos
(1) | FT2:
| Tube Mat:
GRAPHITE | Type:
| 6'L x 8" dia, SIZE 08072 |
|
EX-223
Photos
(3) | FT2:
| Tube Mat:
| Type:
SPC | Air exchanger. 4 inlet/outlet shell. 2 inlet/outlet tubes. |
|
EX-229
Photos
(0) | FT2:
| Tube Mat:
| Type:
| 12' tubes. Shell is 18 dia. Openings: Tube side: 2-4. Type 1MV-2 |
|
EX-252
Photos
(0) | FT2:
| Tube Mat:
GRAPHITE | Type:
| |
|
EX-253
Photos
(0) | FT2:
| Tube Mat:
GRAPHITE | Type:
BLK | 1'4 x 1'4 x 1'4. |
|
EX-306
Photos
(3) | FT2:
| Tube Mat:
Stainless Steel (SS) | Type:
P/F | Stainless Steel plate & frame heat exchanger. 4" inlet/outlet. Plates are approx. 2' W x 4' H. Hydro test hot side/cold side 113 psig. |
|
EX-315
Photos
(1) | FT2:
| Tube Mat:
GRAPHITE | Type:
| 10' L x 6 1/2 " dia |
|
EX-316
Photos
(1) | FT2:
| Tube Mat:
GRAPHITE | Type:
| 9' L x 6" dia |
|
EX-317
Photos
(1) | FT2:
| Tube Mat:
GRAPHITE | Type:
SHELL AND TUBE | 106 1/2" L x 6 " dia |
|
EX-319
Photos
(1) | FT2:
| Tube Mat:
GRAPHITE | Type:
| 144'L x 10' dia |
|
EX-354
Photos
(1) | FT2:
| Tube Mat:
304SS | Type:
| Stainless Steel shell and Tube heat exchanger. |
|
EX-227
Photos
(3) | FT2:
2 | Tube Mat:
| Type:
SPIRAL | UNUSED. Spiral tube. ~ 2 sq. ft. 10" dia x 2' L |
|
EX-146
Photos
(0) | FT2:
3 | Tube Mat:
| Type:
SPIRAL | Pressures listed are test pressures. |
|
EX-165
Photos
(2) | FT2:
4 | Tube Mat:
SS | Type:
P/F | (7) approx. 5 x 28 plates. 1 treaded openings. |
|
EX-342
Photos
(3) | FT2:
10 | Tube Mat:
Stainless Steel | Type:
| Stainless Steel (24)~1/4 tubes x 5'6 lgth. Shell has 1 opening. Tubes ~ 1.5 openings |
|
EX-339
Photos
(4) | FT2:
10 | Tube Mat:
SS | Type:
U Tube | Approx. 10 Sq.Ft. Unit has (32) 7/16" OD x 28" lgth. tubes. Shell is 8" diameter. |
|
EX-349
Photos
(5) | FT2:
12 | Tube Mat:
Stainless Steel (SS) | Type:
U tube | Stainless Steel Shell & Tube heat exchanger. Shell is 6" diameter. Has (4) U-tubes (8 holes), 1" OD x 6' L. Carbon Steel head. Unit with NB# 6912, shell re-rated to 100/FV @ 450 degF. Previously used as after condenser. |
|
EX-161
Photos
(1) | FT2:
14 | Tube Mat:
SS | Type:
| Both shell and tube are also rated for -20 deg. @ 150psi. 12 tubes @ 3/4 O.D. Tubes are 6' long. |
| |
| 1 2 3 4 5 » |
