• Blenders / Mixers
• Blowers / Fans
• Boilers
• Centrifuges
• Columns
• Compressors
• Coolers / Chillers
• Dryers
• Dust Collectors
• Filters
• Gear Boxes
• Generators
• Heat Exchangers
• Heaters
• Mills / Grinders
• Miscellaneous
• Motors
• Plants
• Pumps
• Reactors
• Screeners
• Tanks
• Turbine
• Vessels (Pressure rated tanks)

 

Inventory

Use the navigation to the left to select products. Once selected you can perform a detailed search within that category.

Includes Blowers, Conveyors, Dryers, Hoppers, Mills, Screeners, Silos and Much More

If you don't see what you are looking for CALL or CLICK HERE!

Miscellaneous

« 1  2  3  4  5  6  7 » [View All]

	MISC-317 Photos (0)	Item: BIN	Manufacturer:	Model:	Air blending bin bottom assembly. 7' diameter with bin mounted on top - 14' straight side. Material in contact with product is 304 SS. Capacity 500 cu. ft.
	MISC-372 Photos (0)	Item: BIN	Manufacturer: Perisol Pine	Model: 11479	6' diameter x 8' long. Has CS hammer plate. Cone bottom. Head replaced in 1984. Top inlets: (1) 10, (1) 7, (2) 2.
	MISC-411 Photos (1)	Item: BIN	Manufacturer:	Model:	Transfer bin. 3' diameter x 3' straight side. 2' cone bottom. 12" top inlet.
	MISC-368 Photos (0)	Item: Chiller	Manufacturer: Durham-Bush	Model: P0750	Package chiller. 3/60/440V. Model 75H-LF, s/n 8119125.
	MISC-450 Photos (0)	Item: Chiller	Manufacturer: DESIGN AIR INTERNATIONAL	Model:	6 ton capacity. Chills 100% Methyl Chloride from -27.4°F to -32.8°F. Uses refrigerant R-22. Power 3/60/460V. Central 120-I-60. (2) compressors built by Carlyle Comp. Co. - (1) 25 hp Siemens-Allis 1750 rpm, 3/60/230/460V, model 5H40-149, s/n 10865006
	MISC-458 Photos (2)	Item: CHILLER	Manufacturer: FES	Model: FES130	130 Ton Chiller. Compressor is FES, model 130, s/n MKIE454. Motor is Toshiba, 150 HP, 230/460 V, 3540 RPM, 405 TS frame.
	MISC-682 Photos (6)	Item: Clean In Place (CIP) System	Manufacturer: Waukesha Cherry-Burrell	Model:	Clean In Place (CIP) System. Approximately 100 Gallon (80 Gallon (300 Liter working capacity) Waukesha Cherry-Burrell vessel System with pumps and control panel on skid. Vessel rated 50 psi @ 302ºF internal / external rated 15psi @ 302 F. Serial # E-488-95, National Board # 4434, Built 1996.
	MISC-313 Photos (0)	Item: CONTROL	Manufacturer: Fisher	Model:	Type 667ED with 3582 positioner;
	MISC-659 Photos (7)	Item: Conveyor, Belt	Manufacturer: Northeast Conveyor Systems	Model:	Northeast Conveyor Systems Intralox Belt conveyor. L 21'6" x W 26" x Belt 24" Wide x Height 35" adjustable.3 sections: two 8" sections w/ legs on each end plus one 5'6" center section. Morse 3/4 HP electric motor 230/50 60 w/Zycron speed/direction control has removable upper tamper belt section at end. Food-grade Intralox belt. Individual formers on belt are removable.
	MISC-357 Photos (0)	Item: CONVEYOR, SCREW	Manufacturer:	Model:	Screw feeder driven by 1.5 HP, 3/60/230/460V, 1140 rpm motor thru Falk gear reducer - est. 100 rpm output. Single CS screw, 8" diameter x 2'6" long. Inlet 20", discharge 4".
	MISC-408 Photos (2)	Item: CONVEYOR, SCREW	Manufacturer:	Model:	Screw type. Previous used to feed ingredients in muffin making plant. 12" inlet, 6" oulet. 3' 9" long (some are approx 4' 6"). 6" diameter screw. With dust collector bags and rotary valve. Driven by 1.5 hp, 3/60/230/460V, 1730 rpm motor thru Syncrogear 5
	MISC-575 Photos (4)	Item: CONVEYOR, SCREW	Manufacturer:	Model:	SS Screw Conveyor. 9" dia x 9'6"L screw. Driven by 1.5 HP, 16.5 RPM, mdl# 528 Allis Chalmers motor.
	MISC-416 Photos (1)	Item: CONVEYOR, SCREW	Manufacturer: LINK-BELT	Model:	Unit has ribbon type Screw which is 16' L x 1' dia. Inlet is 4' x 10, discharge is 1' x 10. Chain driven to Link belt variable speed drive. 3 HP, 575 V.
	MISC-513 Photos (4)	Item: CONVEYOR, SCREW	Manufacturer: C. DOERING & SON	Model: 8906	Twin screw extruder/feeder. @ 2'7 L x 3" dia. Both screws and unit are SS with plastic ends.
	MISC-576 Photos (3)	Item: CONVEYOR, SCREW	Manufacturer:	Model:	SS Screw Conveyor. Inclined screw is 8" dia x 7'L. Has 2' x 2' hopper. Unit is on wheels. 2 HP, 208-230/460 volt, 1725 RPM, Frame 560. XP (hazardous location) rated motor. into a SM Cyclogear reducer.
	MISC-492 Photos (0)	Item: COOLING UNIT	Manufacturer: LIEBERT CORP	Model: CSC 0864	Air conditioner units. 208/230 V, 15 AMP
	MISC-329 Photos (5)	Item: CRYSTALLIZER	Manufacturer: CHEMTEC/ARMSTRONG	Model:	Scraped surface exchanger / Crystallizer. 324mm dia. x 9130 mm jacketed length. Approximately 100 sq.ft. surface area. 10500 mm overall length. 3 HP gearmotor, 415 vac/3ph/50 hz, flame proof drive, Approximately 10 RPM output. Rated 10 kg/cm2 @ 50 C or -28.8 C. (142 PSI @ 122 F or - 19.8 F). Last used as Menthol crystallizer.
	MISC-310 Photos (0)	Item: CYCLONE	Manufacturer: YOUNG	Model: 22	Air classifier. Size 22
	MISC-488 Photos (0)	Item: CYCLONE	Manufacturer:	Model:	10" top and side inlets. 2" btm discharge. 7' OAL x 2' dia. 3' S/S (straight side).
	MISC-542 Photos (0)	Item: DEAERATOR SYSTEM	Manufacturer: CLEAVER BROOKS	Model: SM30-600	Deaerator system, complete with (2) Goulds pumps, model 3196, 3600 RPM, 54 GPM @ 495 ft/head. Driven by 25 HP, 3500 RPM, 575 V. Does not include tank. Capacity 12075.
	MISC-305 Photos (0)	Item: Demineralizer	Manufacturer: Cochrane	Model: S240	Mixed bed Uni Pac demineralizer. 37 gpm maximum rate.
	MISC-344 Photos (0)	Item: DRUM DUMPER	Manufacturer: Auto. Ind. Mach	Model:	Heavy duty low level hydraulic drum dumper with explosion proof controls and motors. 12 square x 18 high surge hopper. 6 pneumatic knife gate. 304 SS contact surfaces. Used to empty 50 kg. drums - 17 diameter x 23 high.
	MISC-510 Photos (0)	Item: DRUM DUMPER	Manufacturer: TUBAR	Model: TD	750 lb. Capacity. 220 V, 3 PH, XP motor. Unit is on wheels.
	MISC-569 Photos (4)	Item: Drum Dumper	Manufacturer: Metolift	Model: TULM	MetoLift Drum Lifter/Dumper mfg by Meto Corp. This unit is on wheels in excellent and clean condition. Model TULM-02-DM-1, Capacity 145 KG (320 lbs.); S/N 6916. Max discharge height 46", overall extended height 87"
	MISC-681 Photos (5)	Item: DRUM DUMPER/HANDLER	Manufacturer: Thurman Drum Runner	Model: 5600	Thurman Drum Runner model 5600, Drum dumper/handler. 1000 lbs capacity. Pneumatic cylinder lift with Joystick controller Air flow regulator for the Two 19 gallon air tanks. Includes standard Center foot stabilizer for secure drum transport locking Portable on wheels. All-welded carbon steel frame with Patented clamping assembly Large handle for easy maneuvering of 55 gallon drums. All-welded carbon steel frame 1000 pound rated hydraulic cylinder for drum transporting and drum lifting Drums 29" to 35" high, diameters 18" to 23.5"
«  1  2  3  4  5  6  7 »

Used Process Equipment | Used Stainless Steel Tank | Sell Used Chemical Process Equipment | Process Equipment Appraisals | Used Reactor | Buy and sell Manufacturing Chemical Plants | Refinery for sale | Buy Oil Refinery | Ethanol Plant Equipment | Used Tanks | Used Heat Exchangers | Used Filters | Used Mills | Used Granulators | Used Twin Shell Blender | Used Column | Distillation Column | Industrial Sites For Sale | Industrial Dismantling | Industrial Demolition | Used Centrifuges | Used Blenders | Used Mixers | Used Dryers | Used Screeners | Used Pumps | Mix Tanks | Pressure Vessels | Chemical Plants | Used Vacuum Pumps | Used Food Processing Equipment | Surplus Process Equipment | Used Process Equipment | Used Pharmaceutical Equipment | Polymerization

Blenders / Mixers Blowers / Fans Boilers Centrifuges Columns Compressors	Coolers / Chillers Dryers Dust Collectors Filters Gear Boxes Generators	Heat Exchangers Heaters Mills / Grinders Miscellaneous Motors Plants	Pumps Reactors Screeners Tanks Turbine Vessels (Pressure rated tanks)